Milwaukee SDS+ Other Bits and Accessories
When a standard masonry bit won't cover the job, Milwaukee SDS accessories help adapt your drill for different tasks.
From chuck adaptors to hollow bits, match the accessory to your machine's SDS fitting, drilling mode and rated capacity. Check compatibility before buying, then choose the kit for your next fixing or installation job.
What Are Milwaukee SDS Accessories Used For?
- Drill fixing holes with a compatible hollow SDS bit and extractor to remove dust through the bit as the hole is formed.
- Fit a suitable chuck adaptor for occasional wood or metal drilling with straight-shank bits, using rotary-only mode and staying within the drill's capacity.
- Set repeatable hole depths for plugs and anchors with a compatible depth stop, reducing the risk of drilling deeper than the fixing requires.
- Make larger openings through suitable masonry for pipework and services with a core bit, arbor and drill approved for that application.
- Collect falling debris during overhead drilling with a compatible dust collection cap, while keeping the specified extraction and respiratory protection in place.
Choosing the Right Milwaukee SDS Accessories
Start with the drill's fitting and approved applications, not an accessory that merely looks as though it will fit.
1. Match the SDS Connection
SDS Plus and SDS Max are different fittings. Check the shank specification before ordering; they do not interchange directly. For standard fixing holes, choose Milwaukee SDS Plus Drill Bits rather than adding an adaptor you do not need.
2. Check the Operating Mode
If you are fitting a conventional chuck through an adaptor, use rotary-only mode unless the complete assembly is expressly rated otherwise. Core bits also have specific operating requirements: never assume that a masonry core should be used with hammer action.
3. Check Diameter, Reach and Drill Capacity
For core drilling, match the core diameter, arbor connection and working length to the opening and the drill's stated capacity. Use only a machine approved for that core application with the required clutch or torque protection. A physically compatible shank does not make an undersized drill suitable.
4. Match Dust Control to the Fixing System
If you are installing resin anchors, check the anchor manufacturer's approved drilling and cleaning procedure before choosing a hollow bit. Extraction through the bit does not automatically remove every cleaning step. For depth stops and dust caps, check model compatibility rather than buying by brand alone.
Who Uses Milwaukee SDS Accessories?
Sparkies and mechanical installers use SDS accessories when drilling repeated fixings, fitting containment or making service openings through masonry. Maintenance teams use chuck adaptors for occasional rotary drilling without taking another drill to the work area. Teams running Milwaukee M18 SDS Drills should check the exact model's fitting, operating modes and accessory limits before adding attachments.
The Basics: Understanding SDS Accessories
The SDS fitting secures the accessory while allowing the movement needed for hammer drilling. What happens at the working end depends on the attachment and the mode selected.
1. Chuck Adaptors Change What You Can Hold
An SDS chuck adaptor connects a suitable conventional chuck to the drill, allowing it to hold straight-shank bits. It does not turn the machine into a precision drill press, and the extra length can make close access harder.
2. Hollow Bits Extract Through the Drill Bit
A hollow bit draws drilling dust through internal passages into a connected extractor. This controls dust near the cutting point and can simplify hole preparation where the fixing system specifically approves that method.
3. Core Bits Cut Around the Opening
A core bit cuts an annular opening rather than turning the whole hole into dust. Core type determines the suitable materials, drilling mode and machine requirements, so check the complete setup before drilling a service penetration.
Supporting Kit for SDS Drilling
The right supporting kit keeps dust collection connected and core assemblies properly matched.
1. Dust Extraction Attachments
Check Milwaukee Drill Dust Extraction Attachments for a shroud or collection attachment suited to your drill and hole size. A correctly matched attachment helps capture dust at the hole instead of leaving it across a finished room; connect it to suitable extraction where required.
2. Compatible Extraction Hoses and Connectors
Match the hose connection to the hollow bit's extraction adaptor and your extractor. A loose connection can come apart as you reposition, leaving the bit drilling without effective dust removal.
3. Matched Core Arbors and Pilot Drills
Where the core system requires them, use the specified arbor and pilot drill. Check threads, shank type and pilot arrangement together rather than finding out at the wall that the parts do not assemble.
Choose the Right Milwaukee SDS Accessories for the Job
Match the attachment to the task, then confirm the complete setup is compatible.
| Your Job | Accessory Type | Key Features |
|---|---|---|
| Occasional drilling with straight-shank bits | SDS chuck adaptor and compatible chuck | Correct SDS fitting, chuck connection and rotary-only operation |
| Drilling anchor holes with extraction through the bit | Hollow SDS bit | Specified diameter, working length and compatible extraction connection |
| Making masonry service openings | SDS-compatible core system | Approved material, core diameter, arbor and machine capacity |
| Repeating plug or anchor hole depths | Compatible depth stop | Correct handle mounting and sufficient adjustment range |
| Catching falling debris when drilling overhead | Dust collection cap | Suitable bit diameter and clearance; not a substitute for extraction |
Common Buying and Usage Mistakes
- Buying by brand instead of fitting leads to incompatible parts. Check SDS Plus or SDS Max, any threaded connection and the drill model before ordering.
- Leaving hammer action switched on with a conventional chuck adaptor can damage the assembly. Select rotary-only mode unless the complete setup is specifically approved for percussion.
- Assuming any SDS drill can drive a large core risks overload and dangerous binding. Check the approved core capacity, operating mode and torque protection first.
- Skipping anchor-hole cleaning because a hollow bit was used can compromise the fixing. Follow the anchor manufacturer's instructions for that exact bit and extraction method.
- Treating a dust collection cap as complete dust protection leaves airborne dust uncontrolled. Use the extraction and respiratory protection required by the task assessment.
Solid SDS Bits vs Hollow SDS Bits vs SDS Core Bits
Solid SDS Bits
Choose these for conventional masonry fixing holes. Dust is carried out along the flutes, with separate dust capture where required. Larger hammer-drilling work may call for Milwaukee SDS Max Bits, but only with a matching machine.
Hollow SDS Bits
Choose these when extracting dust through the bit suits the drilling and fixing procedure. They need compatible extraction, so they are less straightforward than a solid bit for an isolated hole without the supporting setup.
SDS Core Bits
Choose a suitable core system for larger circular service openings rather than ordinary fixing holes. Check material and machine approval carefully. For removing material rather than drilling an opening, use suitable Milwaukee SDS Plus Chisels with a compatible chiselling machine.
Maintenance and Care
Clean the Connection
Isolate the drill before removing accessories. Wipe grit from SDS shanks and apply only the lubricant and quantity specified by the drill manufacturer.
Keep Extraction Passages Clear
Check hollow bits, connectors and hoses for blockages. Clear them using the accessory manufacturer's method rather than blowing drilling dust into the work area.
Inspect Before Reuse
Check shanks, cutting tips, threads and chuck jaws for damage. Stop using cracked, bent or badly worn parts; do not grind a damaged SDS shank to make it fit.
Store Dry and Keep Sets Together
Dry accessories before storing them in a case or organiser. Keep matched arbors, pilots and connectors together, and replace split dust caps or depth stops that no longer clamp securely.
Why Shop for Milwaukee SDS Accessories at ITS?
Shop the full Milwaukee SDS other bits and accessories range at ITS, with compatible fittings and supporting drilling kit together in one place. Stock is held in our own warehouse, ready for next-day delivery on available items. Check the individual listing for compatibility, current stock and delivery options before ordering.
Milwaukee SDS Accessories FAQs
What SDS accessories does Milwaukee make?
Milwaukee's SDS-related range includes chuck adaptors, hollow drilling bits, core-drilling components and dust-control accessories, alongside conventional bits and chisels. Availability and compatibility vary by product, so check the individual specification rather than assuming every accessory suits every Milwaukee SDS drill.
Can you use a keyed chuck on an SDS drill?
Yes, where the drill supports rotary-only operation and you use a compatible SDS adaptor and keyed chuck. Check the chuck's thread and retention requirements. Keep hammer action off unless the complete assembly is explicitly approved for it, and expect more length and potential run-out than a direct-mounted drill chuck.
What is a hollow SDS bit used for?
A hollow SDS bit drills masonry or concrete while drawing dust through the bit into a compatible extractor. It is useful for repeated anchor holes and controlling dust at source. Whether it replaces separate hole-cleaning steps depends on the anchor system's approved installation instructions.
Do Milwaukee SDS accessories fit other brands?
Standard SDS Plus or SDS Max shank accessories can generally fit another brand's matching tool holder, provided the machine is suitable for the accessory and task. Model-specific depth stops, dust attachments and extraction connections are not automatically interchangeable. Match the complete specification, not just the SDS label.
What is an SDS core bit used for?
An SDS-compatible core bit makes larger circular openings in suitable masonry, commonly for pipes and services. The core's construction determines which materials and drilling modes are permitted. Do not assume a masonry core can cut reinforcement or that it is suitable for every type of concrete.
Can SDS accessories be used for core drilling?
Yes, with a matched core, arbor and SDS machine specifically approved for that application. Check core diameter limits, operating mode and the required safety clutch or torque protection. An adaptor alone does not make a drill suitable; larger or demanding openings may require a dedicated core drill.
Does Milwaukee make an SDS depth gauge?
Milwaukee supplies depth stops with many of its SDS drills. Replacement availability and fit depend on the model and side-handle assembly, so check the drill's parts information before ordering. A depth stop controls drilling depth; it does not confirm that an anchor hole is clean or correctly sized.
What is an SDS dust cap used for?
The term can mean two different parts. A collection cap around the bit catches falling debris, particularly overhead, while the protective cap at the drill's tool holder helps keep contamination out of the mechanism. Check which part is listed. Neither replaces suitable dust extraction or the respiratory protection required for the job.