OX Tools Pro Slotted Flat Head Screwdrivers
OX Pro slotted screwdrivers are built for flat slot screws, tidy terminal work, cover plates and older fixings that still turn up on site every week.
When you're tightening electrical accessories, adjusting hinges or dealing with older brass screws that chew up easily, a decent blade matters. The OX Pro slotted screwdriver range gives you proper fit, solid handles and tips that hold the slot instead of slipping straight out. If you also need OX Pro Phillips screwdrivers, OX Pro Pozidriv screwdrivers or full OX Pro screwdriver sets, match the tip to the fixing and save yourself rounded heads and wasted time.
What Are OX Pro Slotted Screwdrivers Used For?
- Terminating sockets, switches and older electrical accessories where a flat blade still gives the cleanest fit across the screw slot.
- Adjusting door furniture, cabinet hinges and ironmongery on second fix jobs where narrow slotted screws are still common and easy to mark if the blade is wrong.
- Working on older timber windows, brass plates and restoration fixings where a proper ox pro flat head screwdriver helps stop cam-out and chewed screw heads.
- Setting hose clips, access panels and small mechanical covers in maintenance work where a flat blade is often quicker than swapping bits in a driver.
- Keeping in the van for snagging and general site fixes, especially when you need hand control rather than overdriving a screw with power tools.
Choosing the Right OX Pro Slotted Screwdriver
Sorting the right one is simple: match the blade width and thickness to the screw slot, not whatever happens to be nearest in the bag.
1. Match the Blade to the Slot
If the blade is too small, it will slip and burr the head. If it is too wide or too thick, it will not seat properly. The right ox pro flat blade screwdriver should fill the slot cleanly with no wobble.
2. Think About the Job in Front of You
For electrical accessories and fine screws, go smaller for control. For bigger fixings, panels and tougher screws, use a broader blade with a handle you can really lean on without twisting your wrist.
3. Buy Singles or Build a Working Set
If you keep wearing out one size, just replace it from the OX Pro individual screwdrivers range. If you are setting up a fresh tool bag, a mix of sizes stops you forcing one driver onto every fixing you meet.
4. Check the Fixing Type You Actually Use
Do not buy a flat blade for cross head screws just because it sort of fits. If most of your day is spent on modern screws, look at the right driver tip and pair it properly with your OX Pro fixings and fasteners.
Who Uses These on Site?
- Sparkies use an ox pro slotted screwdriver for terminals, accessory plates and control gear where a clean, square blade fit matters more than speed.
- Joiners and chippies reach for them on hinges, catches and cabinet hardware, especially when working with softer brass screws that split or burr if the tip is off.
- Maintenance teams keep a few sizes handy for plant covers, service panels and quick adjustments where carrying a driver for one screw is more hassle than it is worth.
- Decorators and refurb crews use them when removing older faceplates and fittings carefully without chewing visible screws that have to go back in looking tidy.
Useful Extras for OX Pro Slotted Screwdrivers
A screwdriver is simple kit, but the right backup stops rounded screws, missing sizes and pointless walks back to the van.
1. Screwdriver Sets
A mixed set saves you bodging the wrong blade into the slot because the proper size is not with you. Keep one in the van or workshop and you will spend less time chewing up visible fixings.
2. Individual Replacement Drivers
The sizes you use most always take the hammering. Replacing that one worn driver makes more sense than struggling on with a rounded tip that keeps slipping under load.
3. Matching Cross Head Drivers
Most jobs are a mix of screw types, so keeping flat, Phillips and Pozidriv options together stops you trying to make one driver do everything and wrecking the head in the process.
Choose the Right OX Pro Slotted Screwdriver for the Job
Pick the blade by the screw slot and the amount of torque the job needs.
| Your Job | Category or Type | Key Features |
|---|---|---|
| Faceplates, terminals and fine adjustment work | Small slotted screwdriver | Narrow blade for tight screws, better fingertip control and less chance of marking fittings. |
| General second fix and everyday maintenance | Medium ox pro slotted screwdriver | Good all-round blade width, comfortable handle and enough purchase for repeated daily use. |
| Larger screws, covers and stubborn older fixings | Large ox pro flat head screwdriver | Wider blade for better contact in deep slots and more torque without slipping out. |
| Van stock or mixed site work | Slotted screwdriver set | Multiple sizes on hand so you can match the slot properly instead of forcing one driver onto every screw. |
Common Buying and Usage Mistakes
- Using a blade that is too small for the slot is the usual one. It slips, rounds the screw and leaves you wasting time drilling it out or trying to grip it with pliers.
- Treating slotted and cross head screws as interchangeable always ends badly. Use the proper driver type for the fixing or you will chew the head and lose any proper bite.
- Keeping worn drivers in service for too long is false economy. Once the tip edges are rounded, control drops off fast and visible screws end up looking battered.
- Buying one size and hoping it covers everything usually means a poor fit half the time. A few proper sizes in the bag is cheaper than replacing damaged ironmongery and plates.
- Putting too much force through small terminal screws can strip threads or crack fittings. If the screw is delicate, use a smaller driver and controlled hand pressure rather than brute force.
Slotted Screwdrivers vs Phillips Screwdrivers vs Pozidriv Screwdrivers
Slotted Screwdrivers
Best for flat slot screws on terminals, plates, ironmongery and older fixings. They are simple and versatile, but only when the blade width matches the slot properly. Use the wrong size and they slip faster than any other type.
Phillips Screwdrivers
Best for standard cross head screws where you need a centred fit and decent driving control. If that is more your day-to-day work, go straight to OX Pro Phillips screwdrivers rather than forcing a flat blade into the head.
Pozidriv Screwdrivers
Best for modern wood screws and trade fixings where you need more grip under torque. They hold better than Phillips on many site screws, especially in timber work. For that sort of fixing, use OX Pro Pozidriv screwdrivers.
Maintenance and Care
Keep the Tip Clean
Wipe off paint, filler, grease and dust after use so the blade still seats fully in the slot. A dirty tip never fits as well as you think it does.
Check for Rounded Edges
Look at the blade end now and then. If the corners are polished off or chipped, retire it from finish work before it starts damaging screws on visible fittings.
Store Them Dry
Do not leave them loose in a wet van tray or buried under rubble. Dry storage helps stop rust on the blade and keeps handles in better nick for daily use.
Use the Right Driver for the Job
Using a slotted driver as a scraper, pry bar or chisel wrecks the tip quickly. Keep it for screws and it will last a lot longer and perform properly.
Replace Worn Singles Early
Once one size starts slipping regularly, replace it before it costs you screws and time. It is usually the most-used driver in the pouch that goes first.
Why Shop for OX Pro Slotted Screwdrivers at ITS?
Whether you need one replacement ox pro flathead screwdriver or want to build out a full working range, we stock the sizes and types trades actually use. From single drivers to matching ranges like OX Pro individual screwdrivers, it is all in our own warehouse, in stock and ready for next day delivery.
OX Pro Slotted Screwdriver FAQs
What is a slotted screwdriver used for?
It is used for driving and removing screws with a single straight slot across the head. On site that usually means terminals, faceplates, hinges, older brass screws and general maintenance fixings where a flat blade still does the job better than a bit holder.
What is the difference between slotted and flat head?
In everyday trade use, there usually is not much difference. Slotted refers to the screw drive with one straight slot, and flat head is often used to describe the same screwdriver type. What matters is matching the blade width and thickness to the screw slot so it does not slip.
What sizes do slotted screwdrivers come in?
They come in a range of blade widths, blade thicknesses and shaft lengths, from small terminal drivers up to larger sizes for wider screws and heavier turning. The sensible approach is to keep a few common sizes so you can fill the slot properly instead of making do.
Are OX Pro screwdrivers any good?
Yes, they are solid working screwdrivers for trade use. The OX Pro range is built for regular site abuse with decent handle grip and tips that hold up well, provided you use the right size for the fixing and do not abuse them as pry bars.
How do you choose the right screwdriver size?
Choose the blade that fills the screw slot as fully as possible without overhanging. If the blade rattles about, it is too small. If it will not seat to the bottom of the slot, it is too big or too thick. Proper fit gives you control and stops the head getting chewed up.
