OX Tools Screwdriver Bits
OX screwdriver bit sets cover the fixing work that fills most days on site, from first fix timber to second fix hardware and kitchen fitting.
If you're forever swapping worn bits or rounding screw heads, start with a proper OX screwdriver bits and bit holders range that matches the screws you actually drive. These sets are built for drills and impact drivers doing repeat fixing into timber, board, brackets and fittings, with mixed, Pozidriv and impact-ready options that make more sense than buying singles. Check the bit types before you buy, then keep a set in the van and one in the box.
What Are OX Screwdriver Bit Sets Used For?
- Driving repeated fixings into studwork, sheet materials and carcassing is where an ox screwdriver bit set earns its keep, especially when you are bouncing between PZ2 screws, longer woodscrews and general first fix work.
- Fitting kitchens, ironmongery and second fix hardware goes smoother with ox screwdriver bits that grip the screw properly and stop the bit camming out every other fixing.
- Loading out an impact driver for framing, battening and site hoarding is easier with an ox impact bit set, because the tougher bits cope better with high-torque bursts and constant stop-start use.
- Snagging jobs, maintenance visits and van stock-up work suit ox mixed bit set packs, as you have the common heads ready instead of rooting through loose bits at the bottom of the case.
Choosing the Right OX Screwdriver Bit Set
Sorting the right set is simple: buy for the screws you drive most, not the fancy bits you will never touch.
1. Mixed Set or Dedicated PZ Set
If most of your day is standard site screws, an ox pozidriv bit set usually makes more sense than a broad mixed pack. If you jump between fixings, hardware and maintenance work, go for an ox mixed bit set so you are not short when a different head turns up.
2. Standard Bits or Impact Bits
If you are running an impact driver all day, do not cheap out with standard bits. An ox impact bit set is the better call for repeated high-torque driving and will usually last longer under proper site abuse.
3. Quantity That Matches the Graft
If you lose bits, lend them out, or burn through PZ2s on long screw runs, buy a bigger set with duplicates of the common sizes. For light snagging or van use, a smaller ox bit set is often enough and takes up less room.
4. Check the Common Sizes First
Before you hit buy, check whether the set covers the heads you use every week. Most trades will want solid coverage in PZ2, PH2 and a few slotted or Torx options rather than a case full of odd sizes that never leave the tray.
Who Uses These Bit Sets?
- Chippies rely on these for first fix stud, flooring and sheeting, where a PZ2 or mixed set saves time when every other fixing is a different length or head.
- Kitchen fitters and joiners keep ox screwdriver bits close for hinges, runners, cabinet fixing and trim work, where a clean fit matters more than brute force.
- Sparkies and plumbers use bit sets for mounting clips, pattresses, brackets and access panels, and most keep a compact set in the bag for quick jobs away from the main kit.
- Maintenance teams and site managers swear by mixed sets for snagging and repairs, because one box covers the usual screws without another trip back to the van.
Accessories That Keep Your Bit Set Useful on Site
A decent bit set goes further with the add-ons that stop dropped screws, awkward reach issues and worn holders slowing the job down.
1. Bit Holders
A proper holder keeps the bit locked in and saves that annoying wobble you get with worn chucks or cheap adaptors. Worth having a spare, because when the holder goes sloppy, every fixing starts feeling harder than it should.
2. Magnetic Screw Guides
These help when you are driving one-handed above head height, inside cupboards or up a ladder. They stop screws dropping out just as you are lined up and save a lot of swearing on awkward second fix work.
3. Spare PZ2 and PH2 Singles
Even with a full ox pro bit set, the common sizes wear first. Keep spare singles in the case so you are not stuck using a half-rounded bit that chews the screw head and slows the whole run down.
Choose the Right OX Screwdriver Bit Set for the Job
Match the set to the screws, the driver and how hard you use it.
| Your Job | Category or Type | Key Features |
|---|---|---|
| General first fix with common site screws | OX Pozidriv bit set | Strong PZ2 coverage, quick swaps, sensible choice for timber and board fixing |
| Impact driver use all day on framing and battens | OX impact bit set | Built for high torque, better for repeated driving, less chance of bits twisting out early |
| Snagging, maintenance and mixed fixings | OX mixed bit set | Range of common heads in one case, handy for van stock and call-out work |
| Kitchen fitting and second fix joinery | OX pro bit set | Cleaner engagement on screws, useful spread of sizes, better for detailed fitting work |
| Keeping a compact back-up set in the van | Small OX bit set | Takes less space, covers the basics, good for quick replacements and short jobs |
Common Buying and Usage Mistakes
- Buying a mixed set without checking the bit counts is a common slip, and it usually means you end up short on PZ2 bits while carrying a pile of sizes you never use. Check the duplicates before you buy.
- Using standard bits in an impact driver all day will wear them out faster and can round screws once the tip starts to go. If impact is your main tool, step up to an ox impact bit set.
- Running worn bits for too long wrecks screw heads and makes the driver slip under load. Swap them out early rather than forcing another bag of screws through a tired tip.
- Picking the wrong head type for the fixing is still one of the fastest ways to make a mess of a simple job. Match Pozidriv, Phillips, Torx or slotted properly instead of making do with whatever is nearest.
Mixed Bit Sets vs Pozidriv Sets vs Impact Bit Sets
Mixed Bit Sets
Best for maintenance, snagging and van stock, where you never quite know what fixing is coming next. They are the most flexible option, but not always the best value if you mostly use one head size all day.
Pozidriv Bit Sets
These suit general UK site work where PZ2 screws do most of the heavy lifting. If you are fixing timber, sheet and standard hardware every day, a dedicated ox pozidriv bit set is often the sharper buy.
Impact Bit Sets
Made for impact drivers and hard repetitive driving. They cost more than basic bits, but for framing, battening and long screw runs, they usually cope better with torque and constant use.
Maintenance and Care
Keep Worn Bits Out the Rotation
Once the tip starts rounding off, stop using it. A tired bit does more damage to screws than it is worth and usually takes longer to finish the job.
Brush Dust Out the Case
Sawdust, plaster and site grit build up fast in bit cases. Give the set a quick clean now and then so bits seat properly and you are not fighting packed-in muck every time you grab one.
Store the Common Sizes Properly
Put the bits back where they belong, especially PZ2 and PH2. It sounds basic, but a tidy case saves rooting about on the floor looking for the one size you actually need.
Check Holders for Slop
If your holder starts wobbling or stops gripping the bit cleanly, replace it. Plenty of screwdriving problems come from a tired holder rather than the bit itself.
Why Shop for OX Screwdriver Bit Sets at ITS?
Whether you need a compact ox screwdriver bit set for the van, an ox impact bit set for daily site work, or a fuller ox mixed bit set for snagging and maintenance, we stock the range in depth. You will also find related OX power tool accessories, all held in our own warehouse and ready for next day delivery.
OX Screwdriver Bit Set FAQs
What should be in a screwdriver bit set?
For most site work, you want the bits you actually use, not a case full of odd sizes. That usually means plenty of PZ2 and PH2, a few slotted bits, and if you deal with modern fixings, some Torx as well. A useful set should also include duplicates of the common sizes, because they are the first to wear or go missing.
What is the difference between standard and impact bits?
Standard bits are fine for drills and lighter screwdriving, but impact bits are made to cope with the repeated shock from impact drivers. If you are driving fixings all day into timber or using long screws, impact bits are the safer bet. They are not magic, but they generally hold up better under proper site use.
Are OX bit sets any good?
Yes, they are a solid shout for trade use if you pick the right set for the work. OX tends to focus on the sizes and formats that actually get used on site, and the better sets are well suited to repeated driving in timber, board and general fixings. They are not there to sit clean in a drawer. They are made to be used.
How many bits do I need?
If you only need a back-up for odd jobs, a small set is enough. If you are on site daily, go bigger and make sure it includes duplicates of the heads you use most, especially PZ2. The number matters less than whether the set covers your regular screws without leaving you short halfway through a run.
What bits fit an impact driver?
Most standard quarter inch hex screwdriver bits will fit an impact driver, but fit and lasting well are two different things. For regular impact use, choose impact-rated bits rather than basic ones, especially for long screws, framing fixings and repetitive site work.
Will these cover hand tool jobs as well as power tool work?
They are mainly for drill and driver use, but they still help you keep the right head types matched across the job. If you are also sorting manual fastening kit, it is worth looking at OX screwdriver sets, plus dedicated OX Pozidriv screwdrivers and OX slotted screwdrivers for bench work, electrical plates and careful second fix jobs.
