OX Tools Screwdriver Sets
OX screwdriver kit options give you the drivers you actually use on site for fixings, fittings, plates and panels without rounded tips or soft handles.
When you're forever swapping between terminals, hinges, sockets and general fixings, a proper set saves time and stops you butchering screw heads with the wrong driver. These OX screwdriver sets are built for daily trade use, with the common slotted, Phillips, Pozidriv and precision sizes you'd expect in a van or site bag. Pick the set that matches the work you do most and get sorted.
What Are OX Screwdriver Sets Used For?
- Tightening faceplates, accessories and back box fixings on first and second fix jobs is where an OX screwdriver kit earns its keep, especially when you need the right tip quickly without digging through loose drivers.
- Fitting hinges, handles, catches and cabinet hardware on joinery jobs is easier with a proper spread of Phillips, Pozidriv and slotted drivers that seat properly and stop fixings camming out.
- Working through snagging lists in finished rooms suits OX screwdriver sets well, because you can adjust ironmongery, tighten loose fittings and sort small fixings without dragging power tools everywhere.
- Carrying out light maintenance in plant rooms, site cabins and workshop areas is exactly what an ox trade screwdriver set is for, covering the day to day screws and covers that always need attention.
- Handling smaller screws in terminals, electronics housings and fine fittings calls for an ox precision screwdriver set, where a full size driver is too clumsy for the job.
Choosing the Right OX Screwdriver Kit
Match the set to the screws you actually see all week. A big set is pointless if half of it never leaves the case.
1. Mixed Set or Specialist Set
If you do general site work, go for an ox screwdriver kit with a proper mix of slotted, Phillips and Pozidriv sizes. If you spend most of the day on one type of work, like fine adjustment or electrical fittings, a specialist set makes more sense than paying for drivers you will never touch.
2. Full Size or Precision
If you are working on standard fixings, furniture, ironmongery or site accessories, full size drivers are the right call. If you are into small screws on controls, terminals or detailed kit, an ox precision screwdriver set gives you better control and less chance of slipping.
3. Fixed Drivers or Multi Bit
If you want the toughest everyday option, fixed drivers are still the one for van and bench work. If space matters and you are doing service, maintenance or punch list jobs, an ox multi bit screwdriver set cuts down what you carry without leaving you stuck.
4. Basic 6 Piece or Bigger Range
A straightforward ox 6 piece screwdriver set covers a lot of common site tasks and is often enough for chippies, labour and general maintenance. If you are regularly switching between small, medium and awkward fixings, step up to a larger ox pro screwdriver set with more tip sizes.
Who Uses These on Site?
- Sparkies use OX screwdriver sets for sockets, switches, consumer unit covers and general electrical accessories, and they will usually keep a smaller set close by for quick second fix work.
- Chippies and kitchen fitters swear by a decent ox screwdriver kit for hinges, drawer runners, handles and adjustment work where a drill would be too heavy handed.
- Maintenance teams reach for an ox multi bit screwdriver set when they need one compact option for mixed fixings across offices, warehouses and site welfare units.
- Plumbers and heating engineers use them for control panels, clips, programmer covers and access screws, especially on service calls where you only want to carry what you need.
- Decorators and snagging crews keep a basic ox 6 piece screwdriver set in the van for refitting plates, curtain hardware and small fixtures after finishing work.
Useful Extras to Back Up Your Screwdriver Set
A decent set goes further when you have the bits that stop damage, lost time and chewed fixings.
1. Bit Sets
Worth having alongside an ox multi bit screwdriver set when you come across the odd Torx or security fixing that a standard driver set will not cover. Saves that annoying walk back to the van for one awkward screw.
2. Tool Pouches or Roll Bags
If your drivers are always ending up loose in the bottom of the tote, a proper pouch keeps sizes together and stops tips getting battered against other tools.
3. Voltage Testers
Handy for sparkies working around accessories and covers, so you can check before you start instead of assuming a circuit is dead and finding out the hard way.
Choose the Right OX Screwdriver Kit for the Job
Use this quick guide to match the set to the sort of work you actually do.
| Your Job | Category or Type | Key Features |
|---|---|---|
| General van stock for mixed site work | OX screwdriver sets | Good spread of slotted, Phillips and Pozidriv sizes for everyday fixings and fittings |
| Joinery, kitchen fitting and ironmongery | OX pro screwdriver set | Comfortable handles, common medium sizes, solid tip fit for repeated hand tightening |
| Service calls and maintenance rounds | OX multi bit screwdriver set | Compact carry, quick bit changes, less bulk in the bag |
| Control panels, small terminals and fine components | OX precision screwdriver set | Smaller tips, better control, easier access in tight spaces |
| Basic day to day snagging and household fixings | OX 6 piece screwdriver set | Covers the usual sizes without overcomplicating the kit |
Common Buying and Usage Mistakes
- Buying the biggest set instead of the right set means you pay for loads of drivers you never use. Start with the screw types you see every day and build from there.
- Using Phillips on Pozidriv screws is one of the quickest ways to chew a head out. If the fixing is common on UK site hardware, it is often Pozidriv, so use the right tip.
- Throwing loose screwdrivers into the van wrecks the tips and makes the handles filthy before the set has done a proper week. Keep them in a case, pouch or roll so the working ends stay sharp.
- Using a precision driver for stubborn full size fixings will twist the tip or slip out. Fine drivers are for fine work, not for forcing seized screws free.
- Ignoring insulated options around electrical work can cause real problems. If you are working near live parts or on electrical kit, make sure you are using the correct VDE rated driver set.
Fixed Screwdrivers vs Multi Bit vs Precision Sets
Fixed Screwdrivers
Best for everyday site use, repeated fastening and jobs where you want a solid handle and tip every time. They take more room in the bag, but they are usually tougher and quicker to grab than swapping bits.
Multi Bit Sets
Good for service engineers, maintenance teams and anyone trying to travel light. You get versatility in one tool, but if you are constantly hammering through repetitive fixings, dedicated drivers are still less faff.
Precision Sets
Made for smaller screws in detailed work, not general joinery or site fixings. They give better control in tight spots, but they are not the set to reach for when you need proper torque on larger screws.
Maintenance and Care
Clean the Tips After Dirty Work
Wipe dust, filler, paint and adhesive off the tips after use. A dirty tip will not seat properly in the screw and that is when heads start rounding off.
Store Them Together
Keep your OX screwdriver sets in their case, roll or a dedicated pouch. It stops you losing the one size you always need and protects the tips from getting knocked about in the van.
Check for Worn Tips
If the end looks polished, rounded or chipped, retire that driver from anything important. A worn tip wastes time and ruins fixings that should come out cleanly.
Keep Handles Dry and Free of Oil
Greasy handles slip in the hand and make controlled tightening harder than it needs to be. Give them a quick wipe before they go back in the bag.
Replace, Do Not Force
If a driver is bent, cracked or the tip is gone, replace it. Trying to squeeze more life out of a damaged screwdriver usually ends with a slipped hand or a wrecked screw head.
Why Shop for OX Screwdriver Kits at ITS?
Whether you need a compact ox trade screwdriver set for the tool bag, an ox precision screwdriver set for finer work, or a fuller ox pro screwdriver set for day to day site use, we stock the range in one place. It is all held in our own warehouse, in stock and ready for next day delivery, so you can get the right drivers on site without hanging about.
OX Screwdriver Set FAQs
What screwdrivers should be in a set?
For most UK trade work, a useful set should cover slotted, Phillips and Pozidriv in the sizes you actually meet on fittings, fixings and hardware. A good ox screwdriver kit normally makes most sense when it covers the common medium sizes first, rather than stuffing the box with oddballs you will never touch.
What is the difference between Phillips and Pozidriv?
Phillips and Pozidriv look similar, but they are not the same and mixing them up is how screws get chewed. Pozidriv has extra smaller ribs between the main slots and is very common on UK screws. Use the correct driver and it seats deeper, slips less and transfers force better.
Are OX screwdriver sets any good?
Yes, for general trade use they are a solid shout. OX kit is aimed at site work, so the sets are built around the sizes and handle styles trades actually use. They are not there as showpieces in a tidy garage. They are there for bags, vans, snagging and everyday fastening jobs.
How many screwdrivers do I need?
Less than you think, if they are the right ones. A basic ox 6 piece screwdriver set will cover a lot of common work for joiners, maintenance teams and general site use. If you regularly switch between fine screws, larger fixings and mixed fittings, then a broader set or a multi bit option is worth having as well.
What is a VDE screwdriver set?
A VDE screwdriver set is an insulated set designed for electrical work, tested for working around live equipment to the relevant standard. It is the right choice for sparkies and anyone dealing with electrical fittings. For normal mechanical or joinery jobs, a standard driver set is usually fine, but for electrical work do not cut corners.
Is a multi bit set enough for full time site work?
It depends on the job. For maintenance rounds, service work and light snagging, yes, an ox multi bit screwdriver set can cover a lot. If you are constantly driving the same fixings all day, dedicated screwdrivers are quicker in the hand and usually tougher over time.
Do I need a precision set as well as a standard set?
Only if you deal with small screws regularly. For controls, terminals, delicate covers and finer kit, an ox precision screwdriver set is the proper tool. For general site fixings, a standard set is the one that will do most of the lifting.
