OX Tools Screwdrivers
OX screwdriver sets are built for fixing, fitting and daily site abuse, with the grip, tip fit and strength you need for proper trade work.
If you're forever tightening plates, fitting sockets, adjusting hinges or working through first and second fix, a decent ox screwdriver set saves rounded screws and sore hands. OX screwdrivers are the sort of kit you keep close because the tips seat properly, the handles stay planted in your grip, and the range usually covers the slotted, Phillips, Pozi and insulated drivers you actually use on site. Pick the set that matches your trade and get the right drivers in the bag.
What Are OX Screwdriver Sets Used For?
- Fitting sockets, switches and consumer unit covers is where an ox screwdriver set earns its keep, giving sparkies the common tip sizes needed for neat, controlled terminal work.
- Hanging doors, adjusting keeps and fixing ironmongery is easier with ox screwdrivers that bite properly into screw heads instead of camming out and chewing the fixing.
- Building kitchens, wardrobes and site joinery calls for a reliable ox pozi screwdriver and flathead driver for assembly work, hinge tweaks and panel fittings right through second fix.
- Carrying out maintenance in plant rooms, schools or rented properties suits an ox pro screwdriver set because you have a full spread of drivers to deal with mixed fixings without rummaging for singles.
- Working on live-adjacent electrical jobs is where an ox insulated screwdriver set matters, giving you the correct protected drivers for controlled electrical fixing work where standard handles are not enough.
Choosing the Right OX Screwdriver Set
Sorting the right set is simple: buy for the fixings you actually face every day, not the set with the most pieces.
1. Tip Types First
If most of your work is UK site fixings, make sure the set covers Pozi properly because that is what you will reach for most. If you work on electrical gear, control panels or older fittings, you will want a proper mix of Pozi, Phillips and slotted drivers rather than doubling up on sizes you never use.
2. Standard or Insulated
If you are doing electrical installation or maintenance, do not make do with ordinary drivers. An ox insulated screwdriver set is the right call for that work. If your jobs are mostly joinery, furniture fitting or general site fixes, a standard set gives you the drivers you need without extra bulk.
3. Handle Grip Matters More Than You Think
If your hands are dusty, wet or gloved up half the day, go for sets with rubberised grips and clear handle shaping. A decent handle gives you more control and torque, especially when you are shifting stubborn faceplate screws or driving fixings by hand in awkward corners.
4. Buy a Set That Matches the Job Bag
If you need everyday van stock, a fuller ox pro screwdriver set makes sense. If this is for a pouch, service bag or one-room snag list, a tighter set with the core sizes is usually the better buy because you will actually carry it.
Who Uses These on Site?
- Sparkies rely on an ox insulated screwdriver set for board work, accessories and testing jobs where safe, controlled grip matters and the drivers get used all day.
- Chippies keep ox screwdrivers in the pouch for hinges, handles, catches and quick adjustments during first fix and snagging when grabbing a drill is more hassle than help.
- Kitchen fitters and shopfitters swear by an ox pro screwdriver set for cabinet assembly, hinge setting and trim work where a clean fit on the screw head stops damage to finished surfaces.
- Maintenance teams and landlords like a full ox screwdriver set because one case covers the usual slotted, Phillips and Pozi fixings found across doors, sockets, appliances and general repairs.
Accessories That Keep Your Screwdrivers Useful on Site
A screwdriver set does more for you when the rest of the kit around it stops small jobs turning into a faff.
1. Voltage Testers and Test Equipment
If you are buying an ox insulated screwdriver set for electrical work, pair it with proper testing gear. It saves the dangerous habit of assuming something is dead just because the board says it should be.
2. Fixing and Screw Assortment Boxes
There is no point having the right driver if the screw you pulled from the bottom of the van is chewed or the wrong head type. Keep a tidy assortment of Pozi, slotted and specialist fixings so the driver can do its job properly.
3. Tool Pouches and Cases
A pouch or organiser stops your drivers ending up loose in the van, damaged at the tips or buried under heavier kit. It also means the sizes you actually use are to hand when you are halfway through a snag list.
Choose the Right OX Screwdriver Set for the Job
Match the driver mix to the trade and the fixings in front of you.
| Your Job | Category or Type | Key Features |
|---|---|---|
| General site fixes and van stock | Mixed ox screwdriver set | Core slotted, Phillips and Pozi sizes for everyday fitting, repairs and snagging |
| Electrical installation and maintenance | Ox insulated screwdriver set | Insulated shafts, controlled grip and the sizes commonly used on terminals and accessories |
| Joinery, kitchens and second fix | Ox pro screwdriver set | Strong Pozi coverage, comfortable handles and good tip fit for repeated fixing work |
| Quick adjustments and pouch carry | Compact driver set | Most-used sizes only, easier to carry up steps, through plots and on service calls |
| Older fittings and mixed maintenance jobs | Set with flathead coverage | Useful spread of ox flathead screwdriver sizes for legacy hardware, terminals and plant room panels |
Common Buying and Usage Mistakes
- Buying a set on piece count alone is a common mistake. You end up with loads of duplicate or odd sizes and still not enough Pozi drivers for normal UK site fixings, so check the actual tip spread first.
- Using the wrong tip type on the screw head soon rounds both off. A Phillips forced into a Pozi fixing will slip, mark the work and waste time, so match the driver properly before leaning on it.
- Using standard screwdrivers for electrical work is asking for trouble. If the job involves live-adjacent equipment or proper electrical installation, use an ox insulated screwdriver set instead of taking chances.
- Throwing drivers loose in the van damages the tips and buries the sizes you need. Keep the set in its case or organiser so the points stay clean and the right driver is easy to grab.
- Keeping worn drivers in service too long makes every fixing harder than it needs to be. Once the tip starts slipping or burring screw heads, replace it before it costs you time and finish quality.
Standard vs Insulated vs Pro Screwdriver Sets
Standard Sets
A standard ox screwdriver set is the right pick for general fixing, joinery, assembly and maintenance. It usually gives you the broadest value for everyday work, but it is not a substitute for insulated drivers on electrical jobs.
Insulated Sets
An ox insulated screwdriver set is aimed at sparkies and maintenance engineers working around electrical gear. You get the protection needed for that type of work, though the set may be more specialised and less suited to rough general site abuse.
Pro Sets
An ox pro screwdriver set is the one for regular trade use where comfort, grip and repeated daily use matter. If you are on the tools every day, it makes more sense than a basic set because the handles and tip fit tend to hold up better under constant graft.
Maintenance and Care
Keep the Tips Clean
Wipe plaster dust, grease and metal filings off after use so the tip keeps a proper seat in the screw head. A dirty driver slips sooner and chews fixings.
Store Them Together
Put the set back in its case or rack instead of chucking it loose in the van. It stops lost drivers, damaged tips and the usual waste of time hunting for the right size.
Check Insulated Drivers Regularly
On an ox insulated screwdriver set, inspect the insulation for cuts, splits or heat damage before use. If the protective layer is marked or compromised, retire it and replace it.
Replace Worn Tips Early
If an ox pozi screwdriver or ox flathead screwdriver starts slipping, do not keep forcing it. Worn tips damage screws fast and make a simple fixing job drag on.
Keep Handles Free of Oil
Rubber grips only work if they stay clean. Give handles a quick wipe so they do not turn slick when you need proper torque on stubborn screws.
Why Shop for OX Screwdriver Sets at ITS?
Whether you need a compact ox screwdriver set for the pouch, a full ox pro screwdriver set for daily trade use, or an ox insulated screwdriver set for electrical work, we stock the range in depth. That means the tip types, set sizes and trade-ready options are in our own warehouse and ready for next day delivery.
OX Screwdriver Set FAQs
What tip types are included in an OX screwdriver set?
Most OX screwdriver sets cover the tip types you actually use on UK jobs, usually including slotted, Phillips and Pozi. Some sets are more trade-specific, so if you need an ox pozi screwdriver for common site fixings or insulated drivers for electrical work, check the exact contents before you buy.
Do OX screwdrivers feature non-slip rubber grips?
Yes, many OX screwdrivers are built with soft grip or rubberised handles to stop them turning in your hand when you are leaning on stubborn fixings. That matters on site because dusty hands, gloves and damp conditions soon show up poor handle design.
Are OX screwdrivers color-coded for quick identification?
Yes, many sets use colour coding or clear handle markings to help you grab the right driver quickly. It sounds like a small thing, but when you are moving through snagging or working from a crowded tool bag, it saves time and cuts down on picking the wrong tip.
Are OX screwdriver sets magnetic?
Some are, some are not, so do not assume. Magnetic tips are handy for starting screws one-handed or working in awkward spots, but the exact feature depends on the set. If that matters for your work, check the product details rather than guessing.
Will an OX screwdriver set hold up to daily site use?
Yes, that is what these sets are for, but be realistic. They will handle everyday fixing, fitting and van life well if you use the right tip on the right screw and do not abuse them as pry bars or chisels. Treat the tips properly and they will last.
Is an ox insulated screwdriver set worth it if I only do a bit of electrical work?
If you are doing any proper electrical installation or maintenance work, yes. It is not the place to cut corners. For general joinery or furniture jobs, a standard set is fine, but live-adjacent work needs the correct insulated drivers.
