Milwaukee Cable Cutters Milwaukee Cable Cutters

Milwaukee Cable Cutters

Cutting tails for a consumer unit? Match your Milwaukee cable cutter to the conductor before squeezing the handles.

Milwaukee cable cutters give sparkies a dedicated tool for preparing cable ends without sawing through them. Check conductor material, cable diameter and the cutter's stated capacity, then choose the right model for your installation work.

What Are Milwaukee Cable Cutters Used For?

  • Cut meter tails to length before terminating at a consumer unit, using a cutter rated for the conductor material and size.
  • Trim copper installation cable during first fix so each run has enough length for dressing and termination without leaving unnecessary loops.
  • Remove damaged cable ends during maintenance work on safely isolated circuits, cutting back to sound material before preparing a new connection.
  • Prepare flexible cable for equipment connections with a suitable cutter that contains the strands rather than spreading them across the cut.

Choosing the Right Milwaukee Cable Cutter

Buy for the toughest cable you regularly cut, but do not carry oversized cutters for work a compact pair can handle.

1. Conductor Material Comes First

If you cut copper or aluminium, choose a model explicitly rated for that material. Do not assume those jaws will also handle steel wire, armour or ACSR; these need a cutter with the appropriate stated rating.

2. Read the Capacity Properly

Check whether the specification gives overall cable diameter or conductor cross-sectional area. A capacity in mm² is not the outside diameter, and a multicore cable may exceed the jaw opening despite having relatively small individual conductors.

3. Match the Mechanism to the Workload

For occasional cuts within capacity, direct-action hand cutters keep the kit compact. If larger cables mean repeated heavy squeezing, consider a suitably rated ratcheting or powered cutter rather than pushing a small hand tool beyond its limits.

4. Check Electrical Protection Separately

Comfort grips are not proof of electrical insulation. Where your procedures require insulated tools, check the exact model's certification and voltage rating. Always isolate, secure against reconnection and prove dead before cutting.

Who Uses Milwaukee Cable Cutters?

Sparkies use hand cable cutters for trimming installation cable and tails during first fix and distribution board work. Maintenance electricians and equipment fitters keep them in the tool bag for preparing replacement leads and connections, choosing the cutter around the conductor rather than forcing ordinary side cutters through oversized cable.

The Basics: Understanding Cable Cutter Capacity

The jaw opening only tells you whether a cable fits. The material rating and cutting capacity tell you whether the tool can cut it without damage.

1. Diameter and Cross-Section Are Different Measurements

Cable diameter is measured across the outside, including its covering. Conductor cross-sectional area describes the metal inside. Check which measurement the cutter manufacturer uses before comparing it with your cable.

2. Steel Armour Changes the Job

A cutter rated for copper or aluminium is not automatically suitable for steel wire armoured cable. Steel can chip or notch unsuitable cutting edges, even when the cable fits between the jaws.

Keep Your Cable Cutters Protected and Serviceable

Protect the cutting edges in transit and check spare-part availability before replacing a serviceable tool.

1. Tool Pouch or Protective Case

Keep cutters separate from loose drill bits and fixings. A correctly sized pouch or case helps prevent edge damage and stops exposed jaws catching other kit in the bag.

2. Model-Specific Replacement Blades

For cutters with manufacturer-replaceable blades, the correct replacement can restore cutting performance without replacing the whole tool. Check the exact model compatibility; fixed-edge hand cutters do not accept blade sets.

Choose the Right Milwaukee Cable Cutter for the Job

Start with the cable specification, then choose the cutting mechanism.

Your Job Cutter Type Key Features
Trimming installation cable during first fix Compact direct-action cable cutter Suitable conductor rating, manageable handle size and enough jaw opening for the cable.
Cutting larger copper or aluminium tails Higher-capacity hand or ratcheting cutter Explicit capacity for the conductor size and space to operate the handles.
Making repeated cuts in larger cables Suitably rated powered cable cutter Correct blade or head, material rating and compatible battery platform.
Cutting through steel wire armoured cable Cutter explicitly rated for SWA Confirmed steel armour capability and sufficient overall cable capacity.

Common Buying and Usage Mistakes

  • Buying by jaw opening alone can leave you with a cutter that accepts the cable but cannot cut it safely. Check material and capacity together.
  • Using copper cable cutters on steel armour can notch the blades. Choose a tool explicitly rated for the complete cable construction.
  • Treating coated handles as electrical insulation creates a serious safety risk. Check certification where required and work on isolated, proven-dead conductors.
  • Adding pipes to the handles or twisting the jaws through a stubborn cut can damage the tool. Stop and use a cutter with the correct capacity.

Direct-Action vs Ratcheting vs Powered Cable Cutters

Direct-Action Hand Cutters

Choose these for quick cuts in cable within their stated capacity. They are straightforward to carry and need no battery, but larger conductors demand more hand force.

Ratcheting Hand Cutters

A ratchet advances the blade through repeated handle strokes, reducing the force needed per stroke. It suits larger cables within the tool's rating, but takes more strokes than a direct-action cut and needs room to work the handles.

Powered Cable Cutters

Choose powered cutting for repeated cuts or cable sizes that justify the extra weight and cost. Battery voltage alone does not determine suitability; the exact tool, head and blade ratings still govern what it can cut.

Maintenance and Care

Clean the Jaws After Use

Remove insulation scraps and dirt before putting the tool away. Wipe metal surfaces dry after damp work rather than leaving moisture trapped in the tool bag.

Check the Cutting Edges

Inspect for chips, rolled edges and jaw misalignment. If cuts become ragged or require noticeably more force, stop and check the tool rather than squeezing harder.

Look After Moving Parts

Lubricate pivots or ratchet components only as the manufacturer directs, wiping away excess that would collect grit. Keep handles clean so they remain secure in the hand.

Repair Only Where Intended

Use approved replacement parts on serviceable models. Do not grind cutting edges or alter insulated handles unless the manufacturer permits it; replace damaged tools or arrange authorised servicing.

Why Shop for Milwaukee Cable Cutters at ITS?

ITS stocks the full Milwaukee cable cutter range, covering the sizes and cutting types needed for installation and maintenance work. Stock is held in our own warehouse, ready for next-day delivery. Check the individual listing for cutting capacity, current availability and delivery options before ordering.

Milwaukee Cable Cutter FAQs

What is the difference between Milwaukee cable cutter M12 and M18?

M12 and M18 identify Milwaukee's separate 12V and 18V battery platforms, not interchangeable cutting capacities. The M12 cable cutter is a compact powered option, while the M18 range includes higher-capacity specialist cutting tools. Compare exact model specifications, including conductor material, cable capacity and blade or head type. Neither platform name means the tool can cut every cable, and their batteries are not interchangeable.

Can Milwaukee cable cutters cut SWA cable?

Only models explicitly rated for steel wire armoured cable should cut through the complete cable. A copper and aluminium rating does not cover the steel armour. Check the exact cutter and blade specification, including maximum cable size, rather than assuming that a wide jaw or powered mechanism makes it suitable.

Are Milwaukee cable cutters ratcheting?

Not all of them. Milwaukee cable cutters use different mechanisms depending on the model, including direct-action hand cutting and powered cutting. If you want a manual ratcheting cutter, make sure the specification explicitly states that it has a ratchet mechanism; do not assume every cable cutter works that way.

What size cable can hand cable cutters cut?

There is no single capacity for hand cable cutters. The limit depends on the model, conductor material and whether the cable is solid, stranded or flexible. Read the stated capacity carefully: millimetres describe diameter, while mm² describes conductor cross-sectional area. Never judge capacity simply by whether the cable fits between the jaws.

Do the coated handles mean I can use these on live cable?

No. A comfort coating does not establish electrical insulation, and even certified insulated tools are not permission to cut live cable. Isolate the circuit, secure it against reconnection and prove dead using the appropriate procedure before starting work.

Read more