Worx Combi Drills
Worx combi drill range covers drilling, screwdriving and light masonry work in one bit of kit, ideal for snagging, fitting and day to day site jobs.
If you're moving between timber, metal, fixings and the odd hole in brick, a worx combi drill saves carrying separate kit. These Worx cordless combi drill and worx hammer drill options suit fitters, maintenance teams and trades needing one drill driver that handles general drilling with percussion when required. If you already run Worx Drills and Drivers, it makes sense to keep everything on the same platform. Match the torque, battery size and kit contents to the work, then get the right one on the van.
What Are Worx Combi Drills Used For?
- Drilling into timber, sheet metal and plastics on first fix, kitchen fitting and general maintenance jobs is where a worx combi drill earns its keep day in, day out.
- Driving screws into stud, carcassing, battens and sheet materials is quicker with a worx combi drill driver when you need one tool for drilling pilot holes and fastening straight after.
- Switching to hammer mode lets a worx hammer drill tackle light masonry jobs such as plugging brick, block and mortar for clips, brackets and small fixings.
- Working through snagging lists, van jobs and call-outs is easier with a worx cordless combi drill because you are not dragging leads through occupied homes or finished areas.
- Building up a practical worx combi drill set makes sense for trades who need batteries, charger and case together so the kit stays organised and ready for the next stop.
Choosing the Right Worx Combi Drill
Sort the right worx combi drill by the work you actually do most. Do not buy purely on price if it is going to live on the van every day.
1. Drill Driver Jobs or Proper Combi Use
If you are mostly drilling wood and driving screws, a lighter drill is easier on the wrist all day. If you regularly need to plug brick or block for clips and brackets, make sure you pick a worx hammer drill with a proper percussion mode rather than relying on a standard drill driver.
2. Battery Size Matters
If it is just for snagging and short visits, smaller batteries keep the tool lighter. If you are drilling and driving through a full shift, step up your battery capacity and keep spare Worx Batteries ready so you are not waiting about.
3. Bare Tool or Full Kit
If you are already on the platform, a body only option keeps costs down. If this is your first buy or you need a grab and go setup, a worx combi drill set with batteries, charger and case is the sensible choice.
4. Chuck Capacity and Everyday Use
Check the chuck size before you buy. A 13mm chuck is the usual choice for general trade use because it gives you better flexibility for larger drill bits and mixed materials than smaller chucks.
Who Uses These on Site?
- Sparkies use a worx percussion drill for back box fixings, cable clips and drilling timber or metal tray supports, especially on smaller install and maintenance work.
- Kitchen fitters and chippies reach for a worx combi drill driver when they are swapping between pilot holes, hinge screws, carcass assembly and the odd wall fixing.
- Plumbers and heating engineers keep one in the van for pipe clips, brackets, boxing work and drilling through timber noggins without carrying heavier kit than they need.
- Maintenance teams and property repair crews swear by these for mixed snagging jobs because one drill covers screws, general drilling and light masonry in the same shift.
The Basics: Understanding Worx Combi Drills
A combi drill gives you three main functions in one tool, which is why it ends up being the drill most trades keep closest to hand. Here is what actually matters on the job.
1. Drill Mode
This is for clean drilling in wood, metal and plastic. Use it for pilot holes, clearance holes and general fitting work where you want steady rotation without battering the material.
2. Screwdriving Mode
The clutch lets you drive fixings without chewing heads or sinking screws too deep. It is the setting you will use most for carcasses, battens, brackets and general assembly.
3. Hammer Mode
This adds a percussion action for lighter masonry drilling in brick and block. It is handy for wall plugs and small anchors, but for repeated concrete drilling or bigger holes you are better off stepping up to Worx SDS Drills.
Worx Combi Drill Accessories That Save Time on Site
A few sensible extras stop downtime, speed up changeovers and keep your drill useful across more jobs.
1. Spare Batteries
A spare pack is a no brainer if the drill is earning all day. You do not want the tool dying halfway through second fix or while you are up steps finishing fixings.
2. Fast Chargers
A proper charger cuts down waiting around between jobs and keeps rotation going. Keep one in the van or workshop and pick from the range of Worx Chargers.
3. Masonry and Multi Material Bit Sets
If you are using the hammer mode for wall plugs and brackets, decent bits matter. Worn masonry bits just burn time and make the drill work harder than it should.
4. Driver Bit Sets
Keep a full set of common heads nearby so you are not rounding off screws with the wrong bit. It is one of those cheap fixes that saves plenty of grief by the end of the week.
Choose the Right Worx Combi Drill for the Job
Use this quick guide to sort the right setup for the work in front of you.
| Your Job | Combi Drill Type | Key Features |
|---|---|---|
| Snagging, flat pack assembly and light fixing work | Compact worx cordless combi drill | Lower weight, clutch settings, enough power for timber, plastics and everyday screws |
| General first fix and second fix across mixed materials | Standard worx combi drill driver | Two speed gearbox, 13mm chuck, decent torque and hammer mode for occasional masonry |
| Regular wall plugging in brick and block | Worx hammer drill combi | Percussion mode, stronger torque and better all round drilling performance |
| New starters or van stock with everything together | Worx combi drill set | Batteries, charger, case and less faff getting straight to work |
| Heavy concrete drilling and repeated anchor holes | SDS drill instead of a combi | Proper hammer action, better drilling speed and less strain on the tool |
Common Buying and Usage Mistakes
- Buying a combi drill for constant concrete work is a common mistake. It will do light masonry, but if you are drilling hard material all week, use an SDS and save the combi for what it is built for.
- Choosing the smallest battery to save weight can backfire if you are on longer jobs. You end up swapping packs constantly, so carry enough capacity for a proper shift.
- Using blunt masonry bits makes the drill feel weaker than it is. Fresh bits cut faster, keep holes cleaner and stop the motor taking unnecessary abuse.
- Ignoring chuck size catches people out when they need larger bits. Check the drill will take the accessories you actually use before it turns up on site.
- Overtightening clutch settings when driving screws leads to stripped heads and damaged boards. Back the clutch off and let the tool do the work properly.
Combi Drills vs Impact Drivers vs SDS Drills
Worx Combi Drill
This is the all rounder. It drills wood, metal and plastic, drives screws and handles light masonry when needed. If you want one tool for mixed daily work, this is usually the one to start with.
Worx Impact Drivers
For long screws, repeated fixings and stubborn fasteners, Worx Impact Drivers are quicker and easier on the wrist. They are not the tool for standard drilling duties, so they work best alongside a combi drill rather than instead of one.
Worx SDS Drills
An SDS is the right call for concrete, repeated anchor holes and bigger masonry jobs. It hits harder, drills faster and puts less strain on the operator when compared with a standard worx percussion drill.
Maintenance and Care
Clean the Chuck and Vents
Brush out dust after masonry work and keep the air vents clear. Packed dust makes the tool run hotter and shortens motor life.
Store Batteries Properly
Do not leave battery packs loose in a damp van or completely flat for weeks. Charge them sensibly and store them clean and dry to keep runtime steady.
Use the Right Bits
A worn driver bit or blunt drill bit puts extra strain through the gearbox and chuck. Replace them before they start slipping, wandering or rounding fixings.
Check the Chuck Grip
If bits start creeping or wobbling, inspect the chuck before blaming the drill. A clean, properly tightened chuck keeps holes straighter and stops bit damage.
Repair or Replace Sensibly
If the drill is losing power, overheating or the chuck is badly worn, weigh up repair costs against replacement. Once downtime starts costing you jobs, a fresh tool is often the better answer.
Why Shop for Worx Combi Drills at ITS?
Whether you need a compact worx cordless combi drill for snagging or a full worx combi drill set for everyday van work, we stock the range in one place. That means the drill, the matching batteries and the chargers are all in our own warehouse, in stock and ready for next day delivery.
Worx Combi Drill FAQs
What combi drills does Worx make?
Worx makes cordless combi drills aimed at general drilling, screwdriving and light hammer drilling duties. The range typically covers compact models for lighter fitting work and more capable kits for regular day to day trade and home use.
Can the Worx combi drill be used for masonry drilling?
Yes, a Worx combi drill with hammer mode can handle light masonry such as brick, block and mortar for plugs and small fixings. Be honest about the job though. For repeated concrete drilling or larger holes, an SDS is the better tool.
What chuck size does the Worx combi drill have?
Most trade users will want to check for a 13mm chuck, as that is the practical size for mixed drilling and driving work. Always check the individual product spec before buying, especially if you use larger shank bits or particular accessories.
Does the Worx combi drill come with a carry case?
Some do and some do not. A worx combi drill set is more likely to include a case, batteries and charger, while body only versions usually keep it simple. Check the box contents on the product page so there are no surprises when it lands.
Is a Worx combi drill enough on its own, or do I still need an impact driver?
For plenty of jobs, yes, a combi drill is enough on its own. But if you drive long screws, fit a lot of fixings or work with stubborn fasteners all day, pairing it with an impact driver is a much better setup and saves your wrist.
Will a Worx cordless combi drill cope with regular site use?
For general fitting, maintenance and day to day trade jobs, yes, it is well suited. Just match the model and battery size to the workload. If you buy too light for the work, it will feel underpowered and you will burn through batteries faster.
