Worx Drills and Drivers
Worx drills and drivers cover the everyday fixing, drilling and fastening jobs that fill most site days, from first fix timber and metal to masonry and fixings.
If you're sorting out a reliable worx drills and drivers setup, match the tool to the work instead of buying one machine to do the lot. A Worx Combi Drills handles mixed drilling duties, Worx Impact Drivers save your wrist on long runs of screws, and Worx SDS Drills are the ones for proper masonry graft. If you're already on the platform, having Worx Batteries, Chargers and Mounts sorted makes a big difference when the day's running on.
What Are Worx Drills and Drivers Used For?
- Driving long timber fixings into stud, batten and sheet material is where a worx driver earns its keep, especially when you are working overhead or repeating the same fixing all day.
- Drilling pilot holes through timber, plastic and thin metal on first fix and second fix jobs is straightforward with a worx drill, saving you swapping between bigger kit for smaller tasks.
- Switching from wood to blockwork during snagging, kitchen fitting or maintenance work is what a worx combi drill is built for, giving you rotary drilling with hammer action when the wall is not playing nice.
- Opening up concrete and hard masonry for anchors, clips and cable routes is the job for a worx sds drill, especially where a standard combi starts labouring and burning time.
- Shifting stubborn nuts, heavy fixings and structural bolts on install and maintenance jobs can call for Worx Impact Wrenches when a drill driver is simply the wrong tool.
Choosing the Right Worx Drills and Drivers
Sorting the right one is simple: buy for the material and fixing size you deal with most, not the odd job you might do once a month.
1. Drill Driver or Impact Driver
If most of your day is pilot holes and light drilling, a worx drill is the sensible all rounder. If you are driving lots of long screws, coach screws or repeated fixings, go for a worx driver because it puts the torque down with less kick through your wrist.
2. Combi Drill for Mixed Site Work
If you are in and out of timber, metal and the odd block wall, a worx combi drill makes more sense than carrying separate kit. It will cover most everyday trade drilling without stepping up to heavier masonry tools.
3. SDS for Proper Masonry
Do not kid yourself that a combi will do an SDS job all week. If you are drilling repeated holes into concrete, hard brick or dense block, buy a worx sds drill and save the combi for the work it is actually built for.
4. Bare Tool or Full Kit
If you are starting fresh, a worx drill set is the better buy because you need batteries and a charger from day one. If you are already on the platform, a body only tool keeps the cost down and lets you add what the van is missing.
Who Uses These on Site?
- Sparkies reach for a worx drill set for tray, clips, back boxes and first fix drilling, because one compact kit covers day to day holes and fixings without filling the van with extras.
- Joiners and chippies use a worx driver for repeated screwdriving into studwork, carcassing and sheet material, where lighter kit and decent control matter more than brute force.
- Kitchen fitters and maintenance teams like a worx combi drill for mixed materials, as they are often moving from cabinets and worktops to brick or block in the same room.
- General builders and refurb crews keep a worx sds drill for plugs, anchors and chasing into tougher masonry, especially when a standard hammer drill starts bouncing instead of biting.
The Basics: Understanding Worx Drills and Drivers
These tools all spin a bit, but they do it in different ways. Knowing which action matches the job stops you burning out a tool or wasting half the morning on the wrong wall.
1. Drill Drivers for General Drilling and Fixing
A standard worx drill gives you controlled drilling and screwdriving in timber, plastic and light metal. This is the everyday van tool for pilot holes, hinges, brackets and general fitting work.
2. Combi Drills for Added Hammer Action
A worx combi drill adds a hammer mode that helps bite into brick and block. It is the practical middle ground when you are moving between woodwork and light masonry on the same job.
3. SDS Drills for Hard Masonry
A worx sds drill uses a different hammering action and SDS fitting to break through concrete and tougher masonry far more effectively. That means faster holes, less strain on the tool and less grief for you.
Worx Drill Accessories That Save Time on Site
The right extras stop dead time, cut bit changes and keep your kit useful for longer shifts.
1. Spare Batteries
A spare battery is the obvious one, because there is nothing clever about climbing down a ladder or walking back across site when your tool dies halfway through a run of fixings.
2. Charger
A proper charger keeps your rotation going, especially if one battery is in the tool and one is on charge in the van or cabin while you work through the day.
3. Drill and Driver Bit Sets
A decent mixed bit set saves that familiar faff of finding you have the drill but not the right PZ, TX or masonry bit once the fixing pack is already open.
4. Side Handles and Depth Stops
On masonry jobs these make a real difference to control and consistency, especially when you need repeated anchor holes at the right depth instead of guessing and blowing out the back.
Choose the Right Worx Drills and Drivers for the Job
Use this quick guide to sort the right tool before you buy.
| Your Job | Category or Type | Key Features |
|---|---|---|
| Fitting hinges, brackets, trunking and general fixings | Worx drill driver | Compact size, clutch control, everyday drilling and screwdriving |
| Driving lots of long screws into timber and stud | Worx impact driver | Higher fastening force, less wrist twist, quicker repeat fixing work |
| Working across timber, metal and occasional brick or block | Worx combi drill | Rotary drilling, screw mode and hammer mode in one tool |
| Drilling repeated anchor holes into concrete or hard masonry | Worx SDS drill | SDS chuck, stronger hammer action, faster boring in dense material |
| Starting from scratch with no batteries or charger | Worx drill set | Tool, batteries, charger and case ready to go from day one |
Common Buying and Usage Mistakes
- Buying a standard drill driver when most of your work is long screws and repeated fixings usually ends with sore wrists and slower progress. If fastening is the main job, choose an impact driver instead.
- Using a combi drill for regular concrete drilling is a classic time waster. It will do the odd hole, but for proper masonry work you want an SDS drill or you will just cook bits and lose time.
- Choosing body only tools without checking your battery setup first catches plenty of buyers out. Make sure your platform, charger and spare battery situation are already covered before you add bare tools.
- Running blunt or cheap bits in a decent drill makes the tool look worse than it is. Good bits cut cleaner, faster and put less strain on the motor and chuck.
- Ignoring clutch settings on screwdriving jobs leads to stripped heads, buried fixings and damaged boards. Wind the clutch in properly and let the tool do the work.
Drill Driver vs Combi Drill vs SDS Drill
Drill Driver
Best for timber, sheet material, plastic, pilot holes and general screwdriving. It is lighter and handier than bigger tools, but it is not the one for regular masonry drilling.
Combi Drill
The best all round choice if your work moves between wood, metal and occasional brick or block. It covers more jobs than a standard drill driver, though it still falls short on hard concrete compared with SDS.
SDS Drill
This is the right pick for anchor holes, repeated masonry drilling and tougher materials. It is bulkier and more specialised, so it is overkill for light fixing jobs and everyday joinery work.
Impact Driver
If your main task is driving fixings, an impact driver is often the quicker and less punishing option. It is not a replacement for every drilling task, but for long screws and repetitive fastening it is the better buy.
Maintenance and Care
Keep the Chuck and Bit Holder Clean
Dust and grit around the chuck or hex holder soon turns into poor bit grip and wobble. Give it a quick blow out and wipe down after dirty jobs, especially after masonry work.
Look After Batteries Properly
Do not leave batteries flat for weeks in the van and do not cook them on dashboards in summer. Charge them regularly, store them dry and rotate them so one pack does not take all the punishment.
Use the Right Bits for the Material
Wrong or worn bits strain the motor, slip in the fixing and slow the whole job down. Swap them before they are rounded off, especially on impact work and masonry drilling.
Check for Heat and Play
If the tool is getting overly hot, the chuck is loosening off, or the body has developed play after a knock, stop and inspect it. Catching wear early is cheaper than finishing it off on the next job.
Store It in a Case or Dry Box
Loose tools rolling around the van get battered, pick up damp and lose bits fast. A case or organised box keeps the tool, charger and batteries together and ready for the next start.
Why Shop for Worx Drills and Drivers at ITS?
Whether you need a compact worx drill, a worx driver for fixing work, a worx drill set to get started or a heavier worx combi drill or SDS option, we stock the full range in one place. It is all in our own warehouse and ready for next day delivery, so you can get the right kit on site without hanging about.
Worx Drills and Drivers FAQs
What drills and drivers does Worx make?
Worx makes the main types most trades and home users actually need, including drill drivers, combi drills, impact drivers and SDS drills. That means you can cover everyday drilling, repeated screwdriving and tougher masonry work without jumping between unrelated platforms.
What types of drills are available in the Worx range?
You will typically find standard drill drivers for general drilling and fastening, combi drills for mixed material work with hammer action, and SDS drills for harder masonry. The right one depends on whether you mainly drill timber and metal, light blockwork, or proper concrete and dense brick.
Are Worx drills suitable for masonry drilling?
Yes, but be honest about the material. A worx combi drill is fine for occasional brick and block holes, plugs and light fixing work. If you are drilling hard masonry regularly, a standard combi will soon feel undergunned, so step up to SDS for quicker progress and less strain.
Does Worx make an SDS drill?
Yes, Worx does make SDS drills, and that is the route to take when you are fixing into concrete, dense block or tougher masonry day after day. It is the proper choice for anchor holes and repetitive hard drilling where a combi drill starts to struggle.
Should I buy a worx drill set or a body only tool?
If you have not already got compatible batteries and a charger, buy the kit. It costs more up front but saves the usual mistake of getting the tool home and realising you still cannot use it. Body only makes sense when you are already properly set up on the same platform.
Is a worx impact driver better than a worx drill for screws?
For repeated screwdriving, yes, usually. A worx impact driver is built to drive fixings faster with less kickback through your wrist, especially on longer screws. A worx drill still makes more sense where you need controlled drilling and lighter fastening in one tool.
