Battery and Tool Mounts
Battery and tool mounts keep cordless kit where you left it, not buried in the van or workshop. Proper storage saves time, space, and damaged gear.
If you're sick of batteries rolling round drawers or drills getting piled up on shelves, this is the fix. Battery and tool mounts, power tool battery holders and cordless tool mounts keep your kit organised in vans, workshops and site stores, so you can grab the right battery or driver first time and get on with the job.
What Are Battery and Tool Mounts Used For?
- Mounting cordless drill holders in a van or workshop keeps drills, impacts and bare tools off the floor and stops them sliding about every time you brake or pull gear out.
- Fixing battery wall mounts or under shelf battery holders along a bench frees up drawer space and means charged packs are lined up where you can actually see what is ready to go.
- Sorting battery holders for vans makes end of day pack-up quicker, especially when different lads are using the same platform and batteries keep getting mixed in boxes and cases.
- Using tool wall mounts in site stores or garages keeps cordless kit dry, tidy and less likely to get knocked about under heavier gear like breakers, vacs or fixings tubs.
- Adding power tool storage brackets to a bench, board or racking setup helps you build a proper charging and storage station instead of having chargers, batteries and tools scattered all over the place.
Choosing the Right Battery and Tool Mounts
Sort the mount to the battery platform and where it is going first. Get that wrong and the neat setup you had in mind turns into wasted holes and loose kit.
1. Match the Mount to Your Battery Platform
If you run one cordless range, buy mounts made for that exact slide battery and tool fit. Makita battery holders, Dewalt battery mounts and Milwaukee battery holders are not interchangeable just because the packs look similar from a distance.
2. Wall, Van Racking or Under Shelf
If you are fitting out a workshop, wall and bench edge mounts usually make most sense. If it is for a van, go for battery holders for vans and tool mounts for van racking that keep everything tight and secure when you are driving from job to job.
3. Battery Holders or Tool Mounts
Battery holders are for storing loose packs neatly and safely. Cordless drill holders and tool wall mounts are for hanging the bare tools themselves. Most lads end up needing both if they want a setup that actually works day to day.
4. Think About Pack Size and Weight
If you mostly run bigger capacity packs, check the mount shape and fixing strength. A holder might take the same battery range, but heavier 5Ah, 6Ah or high output packs put more strain on cheap fixings and thin boards.
Who Uses These on Site?
- Sparkies use battery and tool mounts to keep drivers, combis and spare packs organised in the van, so first fix and second fix gear is easy to grab without emptying half the racking.
- Chippies and kitchen fitters swear by cordless tool mounts in the workshop because they keep drills, impacts and nailers off the bench and stop expensive kit getting buried under timber and fittings.
- Plumbers and heating engineers fit battery storage mounts in vans and stores to separate charged packs from flat ones, which saves hunting about when you are halfway through clips, cores or brackets.
- Site managers and maintenance teams use tool wall mounts and battery holders to keep shared cordless platforms tidy, especially where several trades are borrowing the same batteries and chargers.
Battery and Tool Mount Accessories That Make the Setup Work
A tidy mount setup is only useful if the rest of your storage and charging kit works with it.
1. Power Tool Batteries
There is no point building a neat battery wall if half your packs are dead or mismatched. Keep spare Power tool batteries ready so the mounts are holding charged kit, not dead weight.
2. Battery Chargers
A proper charging point next to your battery storage mounts saves the usual mess of leads and packs all over the bench. Set up your Battery chargers close by and you can rotate packs properly.
3. Tool Cases and Case Systems
Not every bit of kit wants hanging up. Use Tool cases and case systems for accessories, blades and loose gear, then keep the tools and batteries you use every day mounted where you can reach them fast.
4. Workshop Storage
If you are fitting out a full bench or garage wall, mounts work best as part of a bigger Workshop storage setup. That stops one tidy corner turning into the only organised bit in an otherwise chaotic space.
Choose the Right Battery and Tool Mounts for the Job
Pick the mount style by where the kit lives and what you need to store.
| Your Job | Battery and Tool Mount Type | Key Features |
|---|---|---|
| Keeping spare packs tidy above a workbench | Battery wall mounts | Quick visual stock check, easy access, solid fixing into board or wall |
| Making use of dead space under a shelf | Under shelf battery holders | Frees up bench tops, keeps batteries clear, neat charging station layout |
| Stopping drills and impacts getting damaged in transit | Cordless drill holders | Secure hanging fit, faster grab and go, suits van racking and workshop walls |
| Organising a mixed van setup with tools and packs together | Tool wall mounts and battery storage mounts | Dedicated place for each item, quicker pack down, less rummaging in boxes |
| Building a full van racking system for cordless kit | Battery holders for vans and tool mounts for van racking | Compact layout, better travel security, keeps kit visible and off the floor |
Common Buying and Usage Mistakes
- Buying a mount just because it looks close to your battery shape is a common one. Battery platforms vary by brand and range, so always match the holder to the exact battery system or it will fit badly or not lock in at all.
- Fixing mounts into thin ply or weak van lining without proper support usually ends with the whole lot tearing out. If you are storing heavier packs or tools, bolt into decent board, racking or a solid backing panel.
- Using battery holders when what you really need is a cordless tool mount leaves drills and impacts still cluttering the place. Separate the packs from the bare tools and build the storage around how you actually work.
- Overloading one section with large capacity batteries can strain the fixings and crack cheaper mounts. Spread the weight across the board and give the bigger packs the strongest positions.
- Ignoring van security is asking for trouble if the doors get forced. A tidy rack helps, but pair your setup with proper Site and vehicle security so organised kit does not become easy kit to nick.
Battery Wall Mounts vs Under Shelf Holders vs Cordless Tool Mounts
Battery Wall Mounts
Best for workshops, stores and bench setups where you want every pack visible at a glance. They are easy to line up and quick to reach, but they take up wall space you may need for shelving or larger gear.
Under Shelf Battery Holders
These make proper use of wasted space and suit smaller workshops or crowded vans. They are ideal when bench tops are already full, but you need enough clearance underneath and solid shelf material for the fixings.
Cordless Tool Mounts
Tool mounts are the right choice when the bare drill, impact or driver is the thing getting damaged or lost. They do not replace battery holders though, so if you are trying to sort the full cordless setup, plan for both.
Maintenance and Care
Check Fixings Regularly
Vibration from van use and repeated tool removal can work screws loose over time. Give mounts a quick check every so often, especially if they are carrying heavier batteries or hanging from racking.
Keep the Mounting Area Clean
Dust, swarf and site grime build up around holders fast, especially in workshops. Brush them out now and then so batteries and tools slide in cleanly instead of binding or wearing awkwardly.
Watch for Cracks or Deformation
If a mount starts spreading, cracking or sagging, swap it before it drops a battery pack or bare tool. It is cheaper to replace one holder than one damaged battery and charger setup.
Do Not Store Wet or Muddy Kit
Mounts keep things tidy, but they are not there to dry out soaking gear. Wipe tools and batteries down before storing them, especially after outdoor work, to cut corrosion and grime build-up around the contacts.
Why Shop for Battery and Tool Mounts at ITS?
Whether you need battery wall mounts, cordless drill holders, under shelf battery holders or full van storage options, we stock the range in one place. That means mounts for different tool brands, battery platforms and workshop setups, all held in our own warehouse and ready for next day delivery.
Battery and Tool Mounts FAQs
How do I choose a battery mount for my tool brand and battery platform?
Match it to the exact brand and battery slide fit you use every day. A holder made for one platform will not reliably hold another just because the pack size looks similar. Check the brand, the battery range and whether you need a wall, shelf or van mounting setup before you drill anything.
Can battery and tool mounts be fitted to van racking?
Yes, that is one of the most common uses. Just make sure the racking or backing board is solid enough for the weight and the vibration of daily driving. If you are hanging heavier tools or large battery packs, use proper fixings and do not rely on thin panelling alone.
What is the difference between a battery holder and a cordless tool mount?
A battery holder stores the battery pack on its own. A cordless tool mount is shaped to hold the bare drill, impact driver or other body. If your batteries are tidy but the tools are still piled up, you need tool mounts as well, not more battery holders.
Can battery holders be mounted under a shelf as well as on a wall?
Yes, plenty of battery holders work well under shelves if the design and fixings allow it. It is a good way to use dead space above a bench. Just check you have enough clearance to slide packs in and out properly without fouling the shelf edge or anything stored below.
Will a battery mount hold larger capacity packs from the same range?
Usually yes, if the larger pack uses the same slide connection and casing pattern. The main issue is not just fit, but weight. Bigger packs put more load on the holder and the fixings, so make sure the mount and the board behind it are up to it.
