Trend Door Fitting Pack

Description

• Product Code:TREDOORPACK

• Brand: Trend

• Barcode: 5055284490905

• Category: Router Jigs

• Taxonomy: Hardware > Tool Accessories > Jigs

The Trend Door Fitting Pack from ITS gives you all the accessories you need to fit doors and install locks with ease.

The Trend TR37X1/2TC 12mm x 63mm 1/2" Two Flute Cutter from ITS gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
 Teflon coated, micro grain tungsten carbide tipped cutters for cutting the most abrasive materials to give extra long life. Ideal for use with Trend lock jig.

Shank: 1/2"
Diameter: 12mm
Cut:54mm

The Trend TR12X1/4TC 12mm x 19mm 1/4" Two Flute Cutter from ITS gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.

Teflon coated, micro grain tungsten carbide tipped cutters for cutting the most abrasive materials to give extra long life. Ideal for use with Trend hinge & lock jigs. When using with lock jig you may need to use an auger drill bit to deepen the mortise.

Shank: 1/4"
Diameter: 12mm
Cut: 19mm

The Trend H/JIG/A 2 piece hinge jig is a portable template set designed for recessing hinges in wooden doors & frames, the unique 2 piece design splits into two pieces for easy transportation.

Easy to use with minimal setting-up helps complete the job both accurately & quickly. The hinge jig is quick and simple to set up as the hinge is used as the pattern. Ideal for use on site or workshop increasing productivity with clean and accurate recesses achieved every time.

Four apertures for fire door requirements. Suitable for timber based doors & square butt hinges, it can be used on both inside & outside doors. The H/JIG/A can be used with most routers with a 1/4" collet, although a Unibase may be required for some routers.

A long reach cutter will be required (TRE1/4TR12 or PRO1/4RC12) 12mm diameter with 70mm overall length.

Hinge sizes possible Length min: 67mm, Length max: 127mm.
Width min: 9.5mm, Width Max: 35mm.
Door sizes possible Height min: 1955mm, Height max 2100mm.

The Trend LOCK/JIG Lock Jig from ITS uses a set of interchangeable templates and, with a router, will cut the mortise as well as the face-plate recess for popular door locks.

The Trend Lock Jig is suitable for most common sash mortise & deadlocks, with up to 3" deep mortises, a 7/8" or 1" face-plate. (Deeper mortises can be achieved with a suitable size auger bit).

The jig ensures fast, clean and accurate results on doors 34mm to 58mm thick, even in hardwood.  The Trend Lock Jig features CNC precision manufactured plates & body for maximum accuracy and prolonged life.

The Trend Lock Jig requires a plunge router fitted with a 30mm guide bush plus a 12mm long reach cutter (TRE1/2TR37).

Compatibility: Must be used with a 30mm guide bush and a 12mm diameter cutter. For deep mortises a heavy duty router should be used.

---

Authorised Trend Stockist

ITS are an authorised stockist of Trend Products, we only sell 100% genuine Power Tools and Accessories, so you can trust us for all the tools you need!