Bang on
Brilliant bit of kit, excellent service and quick postage!
(£143.99 INC VAT)
£119.99
EX VAT
The Milwaukee M12 UDEL 12V Universal Dust Extractor from ITS really is a universal device that will work on all Milwaukee SDS+ Drills as well as a large number of competitor drills too.
With an adjustable handle to better grip, the extractor can fit on to competitor branded drills with a 41-61mm neck size. The telescopic nozzle allows up to 210mm in length SDS+ drill bits.
As such, it requires its own power source and will deliver more that 40mins continuous operation on a single M12 B2 2.0Ah Battery. . It is also equipped with a HEPA Filter which captures fine dust particles from re-distribution around the worksite with an efficiency rating of 99.75%.
The extractor includes an adjustable depth guard to allow for the perfect adjustment to tasks, while different vacuum modes allow the unit to stay on continuously or to work in tandem with a drill once it starts.
Once drilling has been completed, the extractor will stay on for an additional 5 seconds to ensure all dust and debris has been collected.
For different diameter sized drill bits, the extractor is supplied with two nozzles to suit drill bits 5-16mm or 16-30mm. It is also equipped with a 310ml transparent tank for capacity visibility as well as a 32mm vacuum connector for direct extraction to an external dust extractor.
Milwaukee's M12 range is a fanastic range of 12V subcompact tools. Built for tough conditions, these small but powerful tools are perfect for those of you that don't need the added weight, size or power of 18V. The range is continuing to grow and you can already get over 90 other tools on the M12 platform.
SHOP THE M12 RANGEBattery Type | Lithium-Ion |
Number of Batteries | 0 |
Charger Included? | No |
Battery Compatibility | Milwaukee 12V Li-ion |
Includes Case | No |
Brushless Motor | No |
Air Flow Rate | 466 l/min |
Tank Capacity | 0.35 Litre |
Hose Width/Diameter | 32mm |
110v Power Take Off | No |
240v Power Take Off | No |
Suction Rate | 23.4 mbar |
Dust Extractor/Vacuum Filter Class | HEPA Filter |
Power Supply | Cordless |
Buying Option | Body with Bag |
Pack Size | 1 |
Product Weight | 1.0kg |
The warranty period is 12 months and commences on the date when the product was purchased. This date must be documented by an invoice or other proof of purchase. The warranty period is one year minimum for products, and one year for batteries and chargers. This warranty applies only on new products.
Most Milwaukee products can be registered for a 3-year warranty. The products EXCLUDED from the 3-year warranty are: M28 Rechargeable battery packs, battery chargers, and accessories.
You must register your tool within 30 days of purchase. You can register your tools here:https://extension.milwaukeetool.eu/index.htm
Brilliant bit of kit, excellent service and quick postage!
Independently powered through m12 battery and can be mounted on any SDS drill that I have come across. Have used it with Milwaukee m12 and m18 SDS, Makita SDS and a Hilti SDS. Where space is not available it can be used dismounted to vac an area close to drill point. The auto works really well with a good overrun, but I like to use the option to just switch it on and turn it of as required. It also has a feature that knocks dust from the HEPA filter after each use, and a vacuum port to clean the dust container. Only downside is the handle is to big and gets in the way as it sticks out at an awkward angle. Simple solution... took a knipex conduit cutter and took it back to a nub. It is now perfect... You should definitely get one... And a knipex con cutter while you are at it!
Description
The Milwaukee M12 UDEL 12V Universal Dust Extractor from ITS really is a universal device that will work on all Milwaukee SDS+ Drills as well as a large number of competitor drills too.
With an adjustable handle to better grip, the extractor can fit on to competitor branded drills with a 41-61mm neck size. The telescopic nozzle allows up to 210mm in length SDS+ drill bits.
As such, it requires its own power source and will deliver more that 40mins continuous operation on a single M12 B2 2.0Ah Battery. . It is also equipped with a HEPA Filter which captures fine dust particles from re-distribution around the worksite with an efficiency rating of 99.75%.
The extractor includes an adjustable depth guard to allow for the perfect adjustment to tasks, while different vacuum modes allow the unit to stay on continuously or to work in tandem with a drill once it starts.
Once drilling has been completed, the extractor will stay on for an additional 5 seconds to ensure all dust and debris has been collected.
For different diameter sized drill bits, the extractor is supplied with two nozzles to suit drill bits 5-16mm or 16-30mm. It is also equipped with a 310ml transparent tank for capacity visibility as well as a 32mm vacuum connector for direct extraction to an external dust extractor.
Things We Love
Specification
Warranty Information
The warranty period is 12 months and commences on the date when the product was purchased. This date must be documented by an invoice or other proof of purchase. The warranty period is one year minimum for products, and one year for batteries and chargers. This warranty applies only on new products.
Most Milwaukee products can be registered for a 3-year warranty. The products EXCLUDED from the 3-year warranty are: M28 Rechargeable battery packs, battery chargers, and accessories.
You must register your tool within 30 days of purchase. You can register your tools here:https://extension.milwaukeetool.eu/index.htm
Customer Reviews (2)
Brilliant bit of kit, excellent service and quick postage!
Independently powered through m12 battery and can be mounted on any SDS drill that I have come across. Have used it with Milwaukee m12 and m18 SDS, Makita SDS and a Hilti SDS. Where space is not available it can be used dismounted to vac an area close to drill point. The auto works really well with a good overrun, but I like to use the option to just switch it on and turn it of as required. It also has a feature that knocks dust from the HEPA filter after each use, and a vacuum port to clean the dust container. Only downside is the handle is to big and gets in the way as it sticks out at an awkward angle. Simple solution... took a knipex conduit cutter and took it back to a nub. It is now perfect... You should definitely get one... And a knipex con cutter while you are at it!