YOU SAVE £30.98 (47%)
(£41.99 INC VAT)
£65.97
YOU SAVE £30.98 (47%)
£34.99
EX VAT
Split your purchase of £41.99 inc VAT into 3 with no sign-up fees or late fees.
Today
1 month
2 months
The perfect way to spread the cost of any purchases of £99 (inc vat) or more
If you have found the tools you need to get the job done, but want to spread the cost then PayPal Credit is the perfect solution. Enjoy 0% interest for 4 months on any order of £99 (inc vat) or more.
The 0% is not just an introductory offer, you'll automatically benefit from 4 months 0% finance every time you spend £99 (inc vat) or more and choose PayPal Credit.
On checkout, go to payment and select ‘Pay with PayPal’ button. You will then need to sign into your account to complete the payment.
Once you have logged into your account choose ‘PayPal Credit’ from the payment options in the PayPal window.
If you're new to PayPal Credit, you will be asked to complete a short application form to apply for PayPal credit.
WHAT IS PAYPAL CREDIT?
PayPal Credit is like a credit card, without the plastic. It's a credit limit that sits alongside your PayPal account which you can use for your online purchases.
WHAT CREDIT OFFERS ARE AVAILABLE?
A 0% interest offer you can use again and again: PayPal Credit's 0% interest offer is better than just an introductory offer. Every time you spend £99 or more, you will automatically get 0% interest for 4 months on that purchase.
Plus, you can spread the cost of purchases under £99 at the standard variable rate of interest, currently 23.9% p.a.
*The minimum payment due still applies to 0% offer balances. Any remaining balance due after the 4-month promotional period or any transactions under £99 will be charged interest at 23.9% p.a. (variable). In order to maintain the 0% offer, you need to keep up monthly repayments and stay within your credit limit.
HOW DO I APPLY?
Applying for PayPal Credit is easy. Just click on the PayPal Credit button on our checkout page.
The application form takes minutes to complete. PayPal will then run a credit check and, if approved, you'll have a credit limit linked to your PayPal account as soon as you accept your Credit Agreement.
You can use the credit limit granted to pay for today's purchase and future purchases at thousands of online stores where PayPal is accepted, up to your credit limit.
DO I NEED TO RE-APPLY IF I ALREADY HAVE PAYPAL CREDIT?
If you already have PayPal Credit you do not need to reapply, just select PayPal Credit as your payment option at checkout.
DO I NEED TO HAVE A PAYPAL ACCOUNT?
Yes, however if you don't have a PayPal account, you can create one as part of the PayPal Credit application.
Signing up for a PayPal account is free and easy; all you need to do is provide your email address, create a password and accept PayPal's User Agreement.
WHAT DO I DO IF I AM UNSUCCESSFUL IN APPLYING FOR PAYPAL CREDIT?
If you have been declined for PayPal Credit, PayPal will send you more information about why your application was unsuccessful. You can still use PayPal to complete your purchase.
WHAT HAPPENS IF I WANT TO RETURN THE ITEM I BOUGHT USING MY PAYPAL CREDIT?
Just return your purchase as normal and the money will be refunded to your PayPal Credit account.
WHAT IS THE COST OF PAYPAL CREDIT OUTSIDE OF PROMOTIONAL OFFERS?
The Representative Example below shows the typical costs of using a PayPal Credit limit, without using promotional offers:
HOW DO I MAKE PAYMENTS?
You can make a one-off repayment from your bank account, debit card or PayPal balance at any time, either online or by calling PayPal Customer Service. Alternatively you can set up monthly Direct Debit payments from a bank account you've linked to your PayPal account. To set up Direct Debit payments, log in to your PayPal account and follow the instructions on the Make a Payment page.
WHEN WILL MY PAYMENT REFLECT ON MY PAYPAL CREDIT BALANCE?
Payments will reflect on your PayPal Credit account the same day you make them. It may take a few days for your available balance to update and for the payment to show on your bank statement.
Vaunt 700mm Worktop Jig, Case & Cutter Kit
The Vaunt 700mm Trade Worktop Jig is made of hard-wearing laminate faced MDF 13mm thick jig that cuts both parts of the joint in 15 minutes including setting up.
Left hand and right-hand corners, 400mm radius peninsular joint, 45° end cut with slight radius, 45° trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps.
Fixed lengths for 250mm, 300mm, 400mm, 450mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm wide worktops. Cuts up to 40mm thick worktops with or without anti-drip post formed edge.
Three open-ended bolt recesses (dog bone style) for 150mm bolts. Features: 45° End Cut 40mm Corner Radius 100mm Corner Radius 400mm Corner Radius 45° Corner Mitre Joint Female cut material width loss 35mm 3x Bolt recesses Bolt recess centres 175 + 175mm Bolt recess width 14mm
Supplied in canvas carry case with a 1/2"" router cutter (1/2"" shank)
ITS are an authorised stockist of Vaunt Products, we only sell 100% genuine Power Tools and Accessories, so you can trust us for all the tools you need!
| Dimensions | 985mm x 390mm x 12mm |
| Pack Size | 1 |
| Product Weight | 1.00kg |
| Product Material | MDF |
| End Cut | 45° |
| Corner Radius' | 40mm/100mm/400mm |
| Corner Mitre Joint | 45° |
| Bolt Recesses | 3 |
| Female Cut Material Width Loss | 35mm |
| Pins Included | Yes |
| Routing Jig Type | Worktop Jig |
| Router Shank | 1/2 |
| Jig Thickness | 12mm |
This product comes with a standard one year warranty covering manufacturing fault. For more information on this products specific warranty details please contact us directly on Email: sales@its.co.uk or Phone: 0208 532 5000 (Monday - Saturday 8am - 5pm) with the ITS Order Ref (above) or the Product Title
Description
The Vaunt 700mm Trade Worktop Jig is made of hard-wearing laminate faced MDF 13mm thick jig that cuts both parts of the joint in 15 minutes including setting up.
Left hand and right-hand corners, 400mm radius peninsular joint, 45° end cut with slight radius, 45° trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps.
Fixed lengths for 250mm, 300mm, 400mm, 450mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm wide worktops. Cuts up to 40mm thick worktops with or without anti-drip post formed edge.
Three open-ended bolt recesses (dog bone style) for 150mm bolts. Features: 45° End Cut 40mm Corner Radius 100mm Corner Radius 400mm Corner Radius 45° Corner Mitre Joint Female cut material width loss 35mm 3x Bolt recesses Bolt recess centres 175 + 175mm Bolt recess width 14mm
Supplied in canvas carry case with a 1/2"" router cutter (1/2"" shank)
ITS are an authorised stockist of Vaunt Products, we only sell 100% genuine Power Tools and Accessories, so you can trust us for all the tools you need!
Specification
Warranty Information
This product comes with a standard one year warranty covering manufacturing fault. For more information on this products specific warranty details please contact us directly on Email: sales@its.co.uk or Phone: 0208 532 5000 (Monday - Saturday 8am - 5pm) with the ITS Order Ref (above) or the Product Title
Accessories you may need
