Vaunt Kitchen Worktop Jigs
Vaunt nail gun nails cover the fixings you actually get through on site, from brad nails and finishing nails to framing nails, staples, coil nails and strip nails.
If your second fix is stopping for bent pins or your first fix gun is fussy on collation, start with the right ammo. Vaunt nail gun nails are built for repeat use across trim, studwork, sheet fixing and general carpentry. You will also find Vaunt Power Tool Accessories if you need the rest of the consumables sorted before the job starts.
What Are Vaunt Nail Gun Nails Used For?
- Fixing skirting, architrave and other clean second fix trim with Vaunt brad nails and Vaunt finishing nails where you want a tidy hold without making a mess of the face.
- Building stud walls, timber frames and rough carcassing with Vaunt framing nails where the gun needs to keep feeding properly through long runs of repetitive first fix work.
- Cladding sheds, fencing panels and external timber jobs with Vaunt coil nails when you want more nails loaded at once and less time climbing down to reload.
- Securing sheet materials, battens and general timber components with Vaunt strip nails on site jobs where speed matters more than hand driving every fixing.
- Tacking membranes, insulation layers and light sheet goods with Vaunt staples where a nail head is not the right fixing and you need fast coverage across larger areas.
Choosing the Right Vaunt Nail Gun Nails
Sort the fixing to the gun and the job first. If the collation, gauge or length is wrong, it does not matter how cheap the box was.
1. Brad Nails for Trim, Framing Nails for Structural Timber
If you are fixing skirting, beads or light mouldings, go with Vaunt brad nails or Vaunt finishing nails so you do not wreck the face of the material. If you are on stud walls, carcassing or first fix timber, you need Vaunt framing nails with the holding strength and format to suit that work.
2. Coil or Strip Depends on the Gun
Do not try forcing a buying shortcut here. If your nailer takes coil nails, buy Vaunt coil nails. If it takes strips, buy Vaunt strip nails. It sounds obvious, but plenty of wasted time starts with the wrong collation arriving on site.
3. Match Gauge and Length to the Material
Shorter, finer nails suit trim and thinner stock where splitting is a risk. Longer nails are for thicker timber and deeper bite. If you go too light, fixings pull out. Go too heavy on delicate finish work and you will spend your afternoon filling cracks.
4. Think About the Working Environment
For internal joinery, clean finish matters most. For outside timber jobs, reload speed and secure holding matter more, which is where coil or framing options come into their own. It is worth keeping a few proper job-specific boxes in the van rather than trying to make one type do everything.
Who Uses These on Site?
- Chippies use Vaunt brad nails and Vaunt finishing nails for second fix, especially on skirting, door linings and trim where clean placement saves filling and snagging later.
- House bashers and timber frame crews reach for Vaunt framing nails when they are firing off studwork, noggins and structural timber all day and cannot afford jams or odd collation issues.
- Roofers and fencing teams use Vaunt coil nails and strip nails for repetitive external timber fixing where reload time, weather exposure and holding power all matter.
- Shopfitters and maintenance teams keep a mix of Vaunt nail gun accessories and staples in the van for quick panel fixing, backing work and small repair jobs that need doing there and then.
Vaunt Nail Gun Accessories That Keep You Working
The right extras stop hold-ups on site and save you trying to bodge fixings with the wrong kit.
1. Staples
Keep Vaunt staples handy for membrane, insulation and light sheet work where nails are the wrong fixing. It saves swapping methods halfway through the job or reaching for hand tools just to finish a run.
2. Mixed Nail Types
A stock of Vaunt brad nails, Vaunt finishing nails and Vaunt framing nails stops the usual headache of trying to run trim nails through a first fix task or using overkill fixings on delicate joinery.
3. Spare Boxes for the Van
Keeping spare coil nails or strip nails in the van is a no-brainer. Nothing wastes more time than a gun sat idle because you ran short with half a room or fence line left to fix.
Choose the Right Vaunt Nail Gun Nails for the Job
Use this as a quick steer before you load the gun.
| Your Job | Vaunt Nail Type | Key Features |
|---|---|---|
| Skirting, architrave and light trim | Vaunt brad nails | Fine gauge fixing, cleaner finish, less chance of marking delicate timber |
| Second fix joinery and visible finish work | Vaunt finishing nails | Strong hold with a neater result where appearance matters |
| Stud walls, carcassing and first fix timber | Vaunt framing nails | Built for heavier timber work, deeper bite and repetitive firing |
| Fencing, cladding and long external runs | Vaunt coil nails | Higher nail capacity in the gun, fewer reloads, good for repetitive outdoor work |
| General timber fixing with strip nailers | Vaunt strip nails | Quick loading, dependable feed and suited to common first fix nailers |
Common Buying and Usage Mistakes
- Buying by price instead of gun type is the usual one. If the nailer takes coil nails and you order strip nails, the box is useless until the next order turns up.
- Using framing nails for trim work will leave you with marked faces, split mouldings and more snagging than the fixing was worth. Keep brad and finishing nails for clean second fix jobs.
- Going too short on nail length might save a few quid, but the fixing will not get enough bite in thicker timber. Match the length to both the top material and what it is actually fixing into.
- Assuming all nail gun nails fit all brands catches people out all the time. Always check gauge, angle, collation and the gun maker's stated compatibility before ordering.
- Running the last few strips or coils without spare stock on site is poor planning. Keep extra boxes in the van, especially on fencing, roofing or studwork jobs where stopping costs you time straight away.
Brad Nails vs Finishing Nails vs Framing Nails
Vaunt Brad Nails
Best for lighter trim, beads and delicate second fix where you want the fixing to stay discreet. They are not the right choice for structural timber or jobs that need serious holding power.
Vaunt Finishing Nails
A step up when you still need a neat result but want more hold than a fine brad gives you. Good for visible joinery and second fix, but still not a substitute for proper framing nails on first fix work.
Vaunt Framing Nails
These are for studwork, carcassing and heavier timber jobs where speed and strength matter more than a near-invisible finish. Great for first fix, far too aggressive for delicate mouldings and finished trim.
Coil Nails vs Strip Nails
Coil nails usually mean more fixings loaded and fewer reloads on repetitive jobs like cladding or fencing. Strip nails are common on first fix nailers and simpler for many framing tasks, but the gun decides which one you buy.
Maintenance and Care
Keep Nails Dry
Store boxes somewhere dry in the van or workshop. Damp fixings can corrode, mark materials and feed badly through the gun when you need them most.
Protect the Collation
Do not chuck loose strips and coils about in tool boxes. Bent or damaged collation is a fast route to misfeeds and jams, especially when the gun is being used all day.
Use Older Stock First
Rotate part-used boxes to the front so you are not leaving older nails sat for months in damp corners of the van. It keeps stock tidy and cuts waste.
Check for Gun Compatibility Before Loading
If a strip or coil looks off, do not force it through the nailer. Check the gauge, angle and format first. That quick check is cheaper than a damaged magazine or a seized driver.
Why Shop for Vaunt Nail Gun Nails at ITS?
Whether you need Vaunt brad nails for second fix, Vaunt framing nails for first fix timber, or staples, coil nails and strip nails to keep the gun fed, we stock the range in one place. It is all in our own warehouse and ready for next day delivery, so you are not left waiting when the fixing list changes. You can also sort related kit at the same time with Vaunt Fastening Tools, Vaunt Power Tools, Vaunt PPE and Vaunt Tool Storage.
Vaunt Nail Gun Nails FAQs
What nail gun nails does Vaunt make?
Vaunt covers the main fixing types most trades actually use, including Vaunt brad nails, Vaunt framing nails, finishing nails, staples, coil nails and strip nails. It means you can sort second fix trim, first fix timber and general fastening work without mixing random makes that may not feed the same.
What nail gun nail types does Vaunt supply?
Vaunt supplies a practical spread of nail gun fixings for common site jobs. That includes nails for trim and finishing work, framing nails for heavier timber, plus staples, coil nails and strip nails depending on the nailer and the job in front of you.
Are Vaunt nail gun nails compatible with all nail gun brands?
No, not with every nail gun brand across the board. You need to check the gun's required gauge, length, collation type and angle before you buy. If those details match, you are usually in business. If they do not, expect feed issues, jams or the nails not fitting at all.
What gauge and length nails does Vaunt supply?
Vaunt supplies different gauges and lengths to suit everything from fine trim to heavier timber fixing. The right one depends on the gun and the material. For neat mouldings and second fix, go finer and shorter. For studwork and structural timber, you will need a heavier format with enough length to get proper bite.
Are Vaunt brad nails any good for skirting and architrave?
Yes, that is exactly the sort of work they are for. Vaunt brad nails suit lighter second fix jobs where you want a clean fixing that does not leave you doing loads of filling. Just make sure the gauge and length match both the trim and the nailer.
Can I use Vaunt framing nails for general carpentry jobs?
Yes, for first fix and heavier timber work they make sense. On stud walls, carcassing and similar jobs, framing nails are the proper choice. For visible finish work though, they are too much and will likely mark or split the material.
