Milwaukee Specialist Saws
When a standard saw cannot reach or finish the cut, Milwaukee specialist saws give you more job-specific options.
Choose a Milwaukee hand saw by its blade and cutting action: fine teeth for joinery, a pipe-rated blade for plastic, or coarse teeth for pruning. Check the stated material suitability before buying, then pick the saw for your job.
What Are Milwaukee Specialist Saws Used For?
- Trim small timber components during kitchen fitting and second-fix joinery with a pull saw suited to controlled, accurate cuts.
- Cut plastic pipe to length during plumbing work with a saw specifically rated for the pipe material, keeping the pipe supported throughout the cut.
- Remove projecting timber plugs or dowels with a suitable flush cut saw where a conventional blade would leave material standing proud.
- Cut manageable branches during grounds maintenance with a pruning blade, choosing a folding model when covered teeth make transport between jobs easier.
Choosing the Right Milwaukee Specialist Saw
Buy for the material and access first; a folding handle or fine blade will not make the wrong teeth cut properly.
1. Match the Blade to the Material
For plastic pipe, choose a blade explicitly rated for that material. For green branches, choose a pruning blade. Do not buy a coarse pruning saw expecting it to leave a clean edge on finished joinery.
2. Choose Control or Fast Waste Removal
If you are trimming small timber sections, a fine-toothed pull saw gives controlled cuts with light pressure. If you are removing branches, coarser pruning teeth clear waste more effectively but leave a rougher finish.
3. Check Access and Blade Length
Check that there is room for a working stroke, not just room to insert the blade. A folding saw packs away neatly, but its open length still needs to suit the cupboard, service void or branch position.
4. Check Flush-Cutting Suitability
If a plug or dowel must finish level with the surrounding timber, choose a saw specifically intended for flush cutting. A flexible blade alone does not mean its teeth will leave the adjacent surface unmarked.
Who Uses Milwaukee Specialist Saws?
Joiners and kitchen fitters use fine-toothed specialist saws for trimming timber where control matters more than speed. Plumbers need material-rated blades for plastic pipe, while grounds maintenance teams use pruning saws for branch removal. Maintenance fitters benefit from compact options for occasional cuts without bringing out a power saw.
The Basics: Understanding Specialist Saw Blades
1. Pull-Cutting Action
A pull saw cuts as you draw it towards you, putting the blade under tension during the cutting stroke. This allows a thin blade and a narrow cut, useful when trimming joinery. Let the teeth work rather than forcing the return stroke.
2. Tooth Size and Finish
Fine teeth generally leave a cleaner finish but remove material more slowly. Coarse teeth provide more space for waste, which helps when cutting branches. Tooth shape and the manufacturer's material rating matter as well as tooth count.
Accessories for Controlled Hand Saw Cuts
Secure the work and support the cut before reaching for the saw.
1. Work Clamps
Clamps stop timber or pipe shifting halfway through a cut. Use suitable jaws or packing on finished surfaces, and avoid crushing thin-walled plastic pipe by overtightening.
2. Bench Hook
A bench hook supports small timber sections and protects the bench during trimming. Match its orientation to the saw's cutting direction; a pull saw can lift work away from a stop arranged only for push cutting.
Choose the Right Milwaukee Specialist Saw for the Job
Use the cut and material to narrow down your choice.
| Your Job | Saw Type | Key Features |
|---|---|---|
| Trimming small timber sections during second fix | Fine-toothed pull saw | Controlled pull stroke, narrow kerf and teeth suited to the timber. |
| Cutting timber plugs level with a surface | Dedicated flush cut saw | Blade and tooth arrangement specifically intended for flush cutting. |
| Shortening plastic pipe during installation | Plastic-pipe-rated hand saw | Confirmed material compatibility and enough blade length for the pipe diameter. |
| Removing branches during grounds maintenance | Pruning saw | Teeth suited to green wood and a blade length appropriate to the branch. |
| Carrying a saw between maintenance jobs | Folding saw with a task-appropriate blade | Covered teeth when closed and a secure opening mechanism checked before use. |
Common Buying and Usage Mistakes
- Choosing by handle style alone leaves you with the wrong blade. Check the cutting material and tooth pattern before deciding whether a folding or fixed design suits you.
- Pushing hard on a thin pull saw can buckle the blade. Apply cutting pressure on the pull stroke and ease off as you return.
- Treating every flexible saw as a flush cut saw risks scratching finished timber. Check that the blade is specifically designed for that work.
- Sawing unsupported pipe produces a wandering cut and can split the final edge. Secure the pipe, support the offcut and deburr before jointing.
Pull Saw vs Pruning Saw vs PVC Saw
Pull Saw for Controlled Timber Cuts
Choose a fine-toothed Milwaukee pull saw for controlled trimming in suitable timber. Its thin blade needs a light hand and is not a substitute for a coarse pruning blade when clearing branches.
Pruning Saw for Branch Removal
Choose a Milwaukee pruning saw for green wood where clearing waste matters more than a joinery finish. A folding design helps with transport, but neither the hinge nor the blade should be used for levering branches.
PVC Saw for Plastic Pipe
For a Milwaukee PVC saw, check the model's stated pipe compatibility rather than relying on appearance. A suitable saw handles cuts where pipe cutters cannot reach, but you still need to cut square and prepare the edge for the joint.
Maintenance and Care
Clear Resin and Cutting Waste
Brush debris from the teeth and remove resin with a cleaner suitable for the blade and handle materials. Keep fingers away from the cutting edge and dry the saw before storage.
Keep Folding Mechanisms Clear
Remove trapped sawdust around the pivot and locking parts. Check that the blade opens and secures correctly before use; stop using it if the mechanism slips or has excessive play.
Protect the Blade in Transit
Close folding blades fully and cover fixed blades with their supplied protection where provided. Keep thin blades out from under heavy tools so they do not arrive at the next job bent.
Replace Damaged Cutting Parts
Check for cracks, missing teeth and permanent bends. Use an approved replacement blade where the model allows it; otherwise replace the saw. Do not assume hardened teeth can be sharpened with a standard file.
Why Shop for Milwaukee Specialist Saws at ITS?
ITS stocks the full Milwaukee specialist saw range, giving you the blade types and formats to match your cutting jobs. Stock is held in our own warehouse, ready for next-day delivery. Check the individual listing for material suitability, included equipment and current availability before ordering.
Milwaukee Specialist Saws FAQs
What specialist hand saws does Milwaukee make?
Milwaukee's hand saw line-up includes pull saws, folding pruning saws, jab saws and saws intended for materials such as plastic pipe. Blade type, folding mechanism and replacement-blade options vary by model, so check the individual specification rather than treating them as interchangeable.
What is a pull saw used for?
A pull saw is used for controlled timber cuts, including trimming small sections and joinery components. It cuts as you draw it towards you. Choose the tooth pattern for the cut, support the work properly and avoid forcing the thin blade on the return stroke.
Is a folding saw good for site work?
Yes, when the blade suits the task. Covered teeth make a folding saw easier to carry in a tool bag, but compact storage does not make a pruning blade suitable for pipe or fine joinery. Check the opening mechanism before each use and never use the blade as a lever.
Can a Milwaukee hand saw cut PVC pipe?
Yes, provided the particular saw is rated for PVC or plastic pipe. Do not assume every Milwaukee hand saw is suitable. Secure the pipe without crushing it, keep the cut square, then deburr and prepare the end as required by the pipe system.
What is a flush cut saw?
A flush cut saw trims projecting material, such as a timber plug or dowel, close to the surrounding surface. Its blade and tooth arrangement are intended for that access. Not every pull saw is suitable for flush cutting, so check the stated application before working against finished timber.
Is a pull saw better than a push saw?
Neither is better for every job. A fine pull saw suits controlled cuts with a narrow kerf, while a conventional push saw is often more practical for general timber sizing. Compare the blade length, tooth pattern and required finish rather than choosing on cutting direction alone.
Can a folding saw be used for pruning?
Yes, if it has a blade intended for pruning. Folding describes how the saw stores, not what it cuts. Work from a stable position, keep your free hand clear and plan where the branch will fall. Do not overreach or attempt branches beyond safe control.
Does Milwaukee make a hand saw for wood?
Yes. Milwaukee offers wood-cutting hand saws, including pull saw options for controlled trimming and pruning saws for branches. Choose fine teeth for a cleaner joinery finish and a pruning blade for green wood; they are different jobs and need different blades.