Mafell Jigsaw Blades
Mafell jigsaw blades are built for clean, accurate cuts in timber, sheet and metal, giving your jigsaw the right bite for fast roughing or fine finish work.
If your cut's wandering, burning, or tearing the face up, it's usually the blade, not the saw. These Mafell jigsaw blades are the ones to match to the material properly, whether you need Mafell wood jigsaw blades for fast site cuts or Mafell metal jigsaw blades for cleaner work on thinner sections. If you are running Mafell p1cc blades, pick the tooth pattern and cut quality for the job and get it right first time.
What Are Mafell Jigsaw Blades Used For?
- Cutting kitchen worktops, sheet timber, MDF and ply on fitting jobs where you need a blade that tracks properly and does not leave the top face looking chewed up.
- Shaping scribed panels, trims and awkward end pieces during second fix, where Mafell jigsaw blades fine cut options help keep sanding and rework to a minimum.
- Trimming metal sheet, light sections and site fixings with Mafell metal jigsaw blades when a grinder would be too rough, too hot, or likely to mark the finished area.
- Handling first fix openings, notch cuts and quick adjustments on joinery and timber framing jobs where a coarse Mafell jigsaw blade set saves time without fighting the saw.
- Keeping a Mafell jigsaw blade pack in the van so you can swap straight from fast rough cuts to cleaner finish cuts instead of trying to force one blade through every material.
Choosing the Right Mafell Jigsaw Blades
Sorting the right blade is simple: match the tooth pattern to the material and finish, not just whatever is already in the saw.
1. Fast Cut or Fine Cut
If you are cutting stud, carcassing or hidden sections, go coarser for speed. If you are working on visible panels, worktops or laminates, use Mafell jigsaw blades fine cut so you are not wasting time cleaning up torn edges.
2. Wood or Metal
Do not force timber blades through metal and expect a decent result. Mafell wood jigsaw blades clear chips and cut quickly, while Mafell metal jigsaw blades use finer teeth to stop grabbing, overheating and wrecking the blade early.
3. Straight Cuts or Curves
If the job needs tighter shapes and scribing, pick a blade suited to controlled curved work rather than the biggest, most aggressive option. For longer straight cuts in sheet material, a more stable blade usually tracks better and leaves less wander.
4. Singles or Packs
If you burn through blades every week, buy a Mafell jigsaw blade pack or full Mafell jigsaw blade set and keep the van stocked. One spare is never enough when you hit nails, glue lines or mixed site materials halfway through a job.
Who Uses These Blades?
- Chippies and kitchen fitters use Mafell jigsaw blades for worktops, scribes, filler panels and finish cuts where a rough edge means more snagging later.
- Joiners keep a Mafell jigsaw blade set close by for bench work and site fitting, swapping between fast-cut and fine-cut blades depending on whether the job is hidden or on show.
- Shopfitters and maintenance teams reach for Mafell p1cc blades when they need controlled cuts in board, laminate or light metal without dragging extra kit through an occupied building.
- Cabinet installers and finish carpenters favour Mafell wood jigsaw blades for tighter, cleaner curves, especially when they are trimming veneered or faced material that chips if you rush it.
Jigsaw Extras That Keep the Cut Clean
The right extras save broken blades, rough finishes and repeat trips back to the van.
1. Spare Blade Packs
A spare Mafell jigsaw blade pack stops the usual site mistake of trying to finish decent work with a blunt blade. Once the cut starts burning or tearing, change it and carry on properly.
2. Jigsaw Base and Guide Accessories
Support parts and add-ons from Mafell Jigsaw Attachments & Accessories help with control, cleaner guidance and protecting finished surfaces when the cut quality actually matters.
3. Storage for Spare Blades
Keeping blades dry and separated in Mafell Tool Bags & Totes stops them getting bent, rusted or lost loose in the bottom of a case with offcuts and fixings.
Choose the Right Mafell Jigsaw Blades for the Job
Pick the blade by material first, then by the finish you need to leave behind.
| Your Job | Mafell Jigsaw Blade Type | Key Features |
|---|---|---|
| Fast first fix cuts in softwood, ply and sheet material | Coarse wood jigsaw blades | Larger teeth, quicker chip clearance, faster progress where the cut will be covered |
| Visible cuts in worktops, laminate and finished boards | Fine cut wood jigsaw blades | Finer tooth pattern, cleaner edge, less breakout on face materials |
| Tight curves and scribed fitting pieces | Narrow profile control blades | Better manoeuvrability, improved curve control, less forcing through turns |
| Thin metal, sheet and light sections | Metal jigsaw blades | Fine teeth, steadier cut, reduced grabbing and less chance of stripping teeth |
| Mixed fitting work with different materials in one day | Mafell jigsaw blade set | Range of blade types on hand, quicker swaps, less bodging with the wrong blade |
Common Buying and Usage Mistakes
- Buying one blade type for every material is the usual false economy. A timber blade in metal or a fine metal blade in thick wood just slows the cut, overheats the blade and leaves a rough finish.
- Keeping a blunt blade in too long wrecks the job quicker than most realise. If it starts burning, wandering or tearing the face, swap it out before you spoil the panel.
- Choosing the coarsest blade for finished work often means more sanding, filling and edge clean-up afterwards. For visible cuts, use Mafell jigsaw blades fine cut and save yourself the snagging.
- Forcing the saw through curves with the wrong blade usually bends the blade and throws the cut off line. Use a blade suited to tighter work and let it cut at its own pace.
- Leaving spare blades loose in the van leads to bent teeth, rust and wasted money. Keep them stored properly so the next blade you grab is still fit to cut straight.
Wood Blades vs Fine Cut Blades vs Metal Blades
Wood Blades
These are the ones for speed in timber, ply and general sheet work. They clear waste quickly and get through first fix material fast, but they are not the right pick if the finished edge will stay on show.
Fine Cut Blades
Fine cut blades trade a bit of speed for a tidier edge. They suit worktops, laminates, veneered boards and fitting jobs where breakout means more remedial work before handover.
Metal Blades
Metal blades use a much finer tooth pattern for sheet, light sections and thin metals. They cut slower by design, but they grab less and last longer where a timber blade would lose teeth almost straight away.
Blade Sets
A Mafell jigsaw blade set makes more sense if your day jumps between carcassing, finish cuts and occasional metal trimming. You are covered for the usual site changes without having to make do with the wrong blade.
Maintenance and Care
Keep Blades Clean
Resin, glue and fine metal debris build up on the teeth and make a decent blade cut like a blunt one. Wipe them down after heavier work so they keep clearing properly.
Store Them Dry and Flat
Blades tossed loose into a box get bent and chipped before they ever reach the saw. Keep them dry, separated and flat so they are ready when you need a straight cut.
Change at the First Sign of Wander
If the blade starts drifting, burning or tearing the face, do not try to nurse it through one more cut. Replace it early and you will save more material than the blade costs.
Do Not Mix Damaged Blades Back In
A blade with missing teeth or a slight twist will only cause grief later. Bin damaged ones straight away so they do not get picked up again in a rush.
Why Shop for Mafell Jigsaw Blades at ITS?
Whether you need a single replacement, a full Mafell jigsaw blade set, or specialist blades for cleaner timber or metal cutting, we stock the proper range in one place. You can also shop the wider Mafell Tools range, including Mafell Jigsaws and the wider Mafell Saw Blades selection. It is all held in our own warehouse, in stock, and ready for next day delivery.
Mafell Jigsaw Blades FAQs
What size blade for mafell plunge saw?
That is a different blade type altogether. Mafell plunge saws use circular saw blades, not jigsaw blades, so blade size is set by the saw model and bore. If you are buying for a jigsaw, ignore plunge saw blade sizes and stick to the correct jigsaw shank and tooth pattern for the material.
Do Mafell jigsaw blades fit other brands' jigsaws?
Some may fit if the shank pattern matches, but do not assume they all will. Check the shank type your jigsaw takes before ordering. The fit needs to be right in the clamp, otherwise you end up with poor tracking, vibration or the blade working loose mid cut.
Which Mafell jigsaw blade is best for fine cuts in timber?
Go for a fine tooth timber blade when the cut edge is staying visible. That is the better choice for worktops, laminates, veneered boards and trim pieces where breakout looks awful and costs you time putting it right.
What shank type do Mafell jigsaw blades use?
Check the individual blade and machine spec before you buy, especially if you are matching Mafell p1cc blades to another saw. Shank type is the first thing to verify, because even a top blade is useless if it does not lock in correctly.
Are Mafell jigsaw blades sold individually or in packs?
Usually both, depending on the blade type and listing. If you already know the exact blade you burn through most, singles can make sense. For mixed site work, a Mafell jigsaw blade pack or Mafell jigsaw blade set is the safer buy because you have the right blade ready when the material changes.
Will these blades cope with site abuse, or are they only for tidy bench work?
They are made for proper trade use, but no jigsaw blade likes nails, hidden screws or being forced through the cut. Use the right blade for the material and let the saw do the work. Treat them properly and they last well. Abuse them and they fail like any other blade.
