< Back to Festool
Festool Systainer Festool Systainer

Festool Systainer

Systainer boxes keep your tools and fixings sorted, stacked, and easy to grab, so you are not tipping a van out just to find one bit.

When you are bouncing between first fix, snagging, and call-outs, good storage saves time every single day. Festool Systainers are made to lock together and travel as one, and the range covers standard systainers and systainer drawers, including Festool drawers and Festool Systainer drawers for fast access to small parts and hand tools. Choose a layout that matches how you actually work, then build your stack around it.

What Jobs Are Systainer Boxes Best At?

  • Loading the van for multi-trade days, because systainer boxes stack tight and move as one so you are not carrying loose cases and tubs up three flights.
  • Keeping fixings, connectors, blades and consumables in order on busy fit-outs, where a labelled systainer drawer stops you burning time hunting through mixed boxes.
  • Setting up a clean, repeatable work area for joinery and second fix, with systainers that keep kit off dusty floors and packed away fast at the end of shift.
  • Running service and maintenance call-outs, where a couple of systainers and a Festool drawer systainer give you quick access without unpacking half the stack.

Choosing the Right Systainer

Pick your systainer around how you access your kit day to day, not how tidy it looks in the workshop.

1. Standard systainers vs systainer drawers

If you are storing a tool, charger, or bigger kit, standard systainers make sense because you can lift the lid and pull it out. If you are constantly reaching for small parts, go straight to systainer drawers or a Festool drawer systainer, because you can open a Festool drawer without unstacking the whole tower.

2. Drawer count and what you really carry

If you only need one category of bits and bobs, a single deeper systainer drawer is easier to live with. If you are splitting fixings, terminals, blades, and hand tools, Festool drawers and Festool Systainer drawers with multiple drawers stop everything getting mixed up by day two.

3. Build a stack that matches your workflow

If you are in and out all day, keep your most-used systainer drawer at the top so you are not lifting heavy boxes just to get to screws. If it is workshop to site and back, put the heavier tools lower and keep consumables in the upper systainers for quick top-ups.

Who Are Systainers For on Site?

  • Chippies and kitchen fitters who want tools, blades, and hardware separated properly, so the right kit is always in the same place on every job.
  • Sparks and plumbers who live out the van, because systainer drawers make small parts and fittings easy to grab without tipping organisers onto the floor.
  • Site maintenance teams and supervisors who need systainers that stack, store, and move cleanly between jobs, cupboards, and site cabins.

The Basics: Understanding Systainers and Systainer Drawers

A systainer is a modular case system that stacks and locks together, so your storage moves as one unit. The key difference is whether you access from the top or the front.

1. Systainer cases (top access)

A systainer case is the classic lidded box for tools and larger kit. It is best when you do not need constant access mid-job, because you normally open it from the top and you may need to unstack to get into it properly.

2. Systainer drawers (front access)

Systainer drawers are built for the stuff you grab all day, like fixings, connectors, blades, and hand tools. With a Festool drawer systainer you can pull a Festool drawer open while it is still stacked, which is exactly what you want when the site is tight and time is short.

Shop Festool Systainer Boxes at ITS

Whether you need a single systainer, a stack of systainer boxes for van storage, or Festool drawers and Festool Systainer drawers for small parts, we stock the range in depth so you can build a setup that works on site. It is all held in our own warehouse and ready for next day delivery, so you can get organised without losing a shift.

Systainer FAQs

What is a systainer used for?

A systainer is used for storing and transporting tools, fixings, and consumables in a stackable system that stays together. On site it is mainly about saving time, because your kit is organised and you can move it in one go instead of juggling loose cases.

What is a systainer case?

A systainer case is the standard lidded box version, built to hold tools and larger items with top access. It is the right choice when you want enclosed storage for a tool and accessories, rather than constant access like you get with systainer drawers.

Are systainers worth it?

Yes, if you are on the tools most days and you are sick of wasted time and damaged kit from loose storage. They are not magic, but the stack-and-lock system and proper compartment control, especially with Festool drawer systainers, pays you back in quicker set-up and fewer lost bits.

Are systainers worth it if I only do occasional jobs?

Not always. If you only need a box for a drill and a handful of bits, a basic case will do the job. Systainers make most sense when you are building a repeatable setup for site work and you want everything to stack, store, and travel properly.

Are there systainer alternatives?

Yes, plenty of brands do stackable tool storage systems, and some are cheaper up front. The real question is whether you need compatibility with existing systainers and whether you want drawers in the stack, because mixing systems usually ends up with awkward loads and wasted space in the van.

Read more

Festool Systainer

Systainer boxes keep your tools and fixings sorted, stacked, and easy to grab, so you are not tipping a van out just to find one bit.

When you are bouncing between first fix, snagging, and call-outs, good storage saves time every single day. Festool Systainers are made to lock together and travel as one, and the range covers standard systainers and systainer drawers, including Festool drawers and Festool Systainer drawers for fast access to small parts and hand tools. Choose a layout that matches how you actually work, then build your stack around it.

What Jobs Are Systainer Boxes Best At?

  • Loading the van for multi-trade days, because systainer boxes stack tight and move as one so you are not carrying loose cases and tubs up three flights.
  • Keeping fixings, connectors, blades and consumables in order on busy fit-outs, where a labelled systainer drawer stops you burning time hunting through mixed boxes.
  • Setting up a clean, repeatable work area for joinery and second fix, with systainers that keep kit off dusty floors and packed away fast at the end of shift.
  • Running service and maintenance call-outs, where a couple of systainers and a Festool drawer systainer give you quick access without unpacking half the stack.

Choosing the Right Systainer

Pick your systainer around how you access your kit day to day, not how tidy it looks in the workshop.

1. Standard systainers vs systainer drawers

If you are storing a tool, charger, or bigger kit, standard systainers make sense because you can lift the lid and pull it out. If you are constantly reaching for small parts, go straight to systainer drawers or a Festool drawer systainer, because you can open a Festool drawer without unstacking the whole tower.

2. Drawer count and what you really carry

If you only need one category of bits and bobs, a single deeper systainer drawer is easier to live with. If you are splitting fixings, terminals, blades, and hand tools, Festool drawers and Festool Systainer drawers with multiple drawers stop everything getting mixed up by day two.

3. Build a stack that matches your workflow

If you are in and out all day, keep your most-used systainer drawer at the top so you are not lifting heavy boxes just to get to screws. If it is workshop to site and back, put the heavier tools lower and keep consumables in the upper systainers for quick top-ups.

Who Are Systainers For on Site?

  • Chippies and kitchen fitters who want tools, blades, and hardware separated properly, so the right kit is always in the same place on every job.
  • Sparks and plumbers who live out the van, because systainer drawers make small parts and fittings easy to grab without tipping organisers onto the floor.
  • Site maintenance teams and supervisors who need systainers that stack, store, and move cleanly between jobs, cupboards, and site cabins.

The Basics: Understanding Systainers and Systainer Drawers

A systainer is a modular case system that stacks and locks together, so your storage moves as one unit. The key difference is whether you access from the top or the front.

1. Systainer cases (top access)

A systainer case is the classic lidded box for tools and larger kit. It is best when you do not need constant access mid-job, because you normally open it from the top and you may need to unstack to get into it properly.

2. Systainer drawers (front access)

Systainer drawers are built for the stuff you grab all day, like fixings, connectors, blades, and hand tools. With a Festool drawer systainer you can pull a Festool drawer open while it is still stacked, which is exactly what you want when the site is tight and time is short.

Shop Festool Systainer Boxes at ITS

Whether you need a single systainer, a stack of systainer boxes for van storage, or Festool drawers and Festool Systainer drawers for small parts, we stock the range in depth so you can build a setup that works on site. It is all held in our own warehouse and ready for next day delivery, so you can get organised without losing a shift.

Systainer FAQs

What is a systainer used for?

A systainer is used for storing and transporting tools, fixings, and consumables in a stackable system that stays together. On site it is mainly about saving time, because your kit is organised and you can move it in one go instead of juggling loose cases.

What is a systainer case?

A systainer case is the standard lidded box version, built to hold tools and larger items with top access. It is the right choice when you want enclosed storage for a tool and accessories, rather than constant access like you get with systainer drawers.

Are systainers worth it?

Yes, if you are on the tools most days and you are sick of wasted time and damaged kit from loose storage. They are not magic, but the stack-and-lock system and proper compartment control, especially with Festool drawer systainers, pays you back in quicker set-up and fewer lost bits.

Are systainers worth it if I only do occasional jobs?

Not always. If you only need a box for a drill and a handful of bits, a basic case will do the job. Systainers make most sense when you are building a repeatable setup for site work and you want everything to stack, store, and travel properly.

Are there systainer alternatives?

Yes, plenty of brands do stackable tool storage systems, and some are cheaper up front. The real question is whether you need compatibility with existing systainers and whether you want drawers in the stack, because mixing systems usually ends up with awkward loads and wasted space in the van.

View Basket

View Basket
ITS Click and Collect Icon
What3Words:
Store Opening Hours
Opening times