Festool Masonry Drill Bits
Festool masonry drill bits are for clean, reliable holes in brick, block and concrete when standard bits just burn out or wander off line.
If you're fixing into hard masonry all week, buy bits that stay sharp, start true and don't shake the drill to bits. These Festool masonry bits and Festool concrete drill bits suit site fitters, sparkies and fixers doing repeated anchor holes, bracket work and first fix drilling. If you need broader options, see Festool Drill Bits, then pick the right size and shank for the job.
What Are Festool Masonry Drill Bits Used For?
- Drilling fixing holes into brick and block for clips, conduit, trunking and light bracket work is where Festool masonry drill bits earn their keep, especially when you need neat, repeatable holes across a full first fix.
- Boring into concrete for frame fixings, anchor bolts and heavier brackets is exactly what Festool concrete drill bits are built for, giving you better bite and less skidding on hard surfaces.
- Working through refurb jobs where old walls vary between soft block, dense brick and patched sections is easier with Festool masonry bits that hold their line instead of wandering as soon as they hit a harder patch.
- Using rotary hammer drills for faster drilling in tougher material suits Festool sds masonry bits, particularly when you're chasing through repeated holes in concrete or dense structural masonry.
Choosing the Right Festool Masonry Drill Bits
Sort the bit to the wall and the drill. That is the bit most lads get wrong.
1. Straight Shank vs SDS
If you are drilling lighter fixing holes in brick and block with a combi or percussion drill, straight shank Festool masonry drill bits are usually the sensible pick. If you are into tougher concrete all day, go straight to Festool SDS Drill Bits and use the proper hammer drill for it.
2. Bit Diameter Matters More Than You Think
Match the bit exactly to the fixing, not what looks close enough in the box. Too small and you burn time forcing plugs in. Too big and the fixing spins or pulls loose, which is no good when you are hanging rail, clips or brackets.
3. Buy for the Material You Actually Hit
If the work is mostly brick, block and concrete, stick with Festool concrete drill bits and proper masonry patterns. If the job changes from tile to timber to metal and back into block, have a look at Festool Multi Construction Drill Bits instead of ruining a masonry bit on mixed materials.
4. Sets vs Singles
If you always use the same few fixing sizes, buy singles and keep spares because those are the ones that go blunt first. If you are doing varied install work, a Festool masonry drill bit set makes more sense and saves rooting about in the van for odd sizes.
Who Uses These on Site?
- Sparkies use Festool masonry drill bit sets for cable clips, trunking, back boxes and bracket fixings, especially on first fix where you are in and out of brick and block all day.
- Kitchen fitters and carpenters reach for Festool masonry bits when fixing battens, cabinets and support rails back to solid walls, because a clean hole means the fixing pulls up properly first time.
- Plumbers and heating engineers use Festool concrete drilling bits for pipe clips, boiler brackets and channel supports, particularly in plant rooms and service risers where the walls are harder than they look.
- General builders and maintenance teams keep Festool carbide masonry bits in the van for snagging, repairs and refits, because there is always one awkward fixing going into old brick or hard concrete before the day is done.
Useful Extras for Festool Masonry Drill Bits
A few simple add-ons save wasted holes, broken fixings and extra trips back to the van.
1. Depth Stops
A depth stop stops you drilling too deep when you are banging out repeated plug holes. That means less dust, tighter fixings and no guessing when every anchor needs to sit the same.
2. Spare Common Sizes
Keep spare 5mm, 6mm and 8mm masonry bits in the case because they are the first to wear out on clip and plug work. Nothing slows a job down like trying to finish with one bit that is already cooked.
3. Dust Extraction Adaptors
If you are drilling indoors on finished work, a dust extraction adaptor is worth having. You will spend less time cleaning up brick dust and keep the hole visible while you drill.
Choose the Right Festool Masonry Drill Bits for the Job
Use the wall type and drill type to narrow it down quickly.
| Your Job | Bit Category or Type | Key Features |
|---|---|---|
| Drilling plug holes in brick for clips and light fixings | Straight shank Festool masonry bits | Fast starts, good accuracy, suited to combi and percussion drills |
| Repeated holes in dense block and concrete | Festool sds masonry bits | SDS fitment, better hammer transfer, less effort on tougher material |
| Anchor and frame fixing work in solid walls | Festool concrete drill bits in larger diameters | Stronger tip design, steadier drilling, cleaner holes for heavier fixings |
| Mixed install work across masonry and other materials | Festool multi material option | Useful where the substrate changes and you need one case to cover more jobs |
Common Buying and Usage Mistakes
- Buying a general purpose bit for proper concrete drilling usually ends with slow progress, overheated tips and rough holes. If the wall is consistently hard, move up to proper Festool concrete drilling bits or SDS types.
- Using the wrong shank for the drill wastes time straight away. A straight shank bit in the wrong machine or expecting SDS performance from a light drill only gives you poor drilling and more wear on the tool.
- Guessing hole size for wall plugs is a classic one. Always match the bit to the fixing spec or you end up with loose plugs, spinning screws and a second hole to hide the first mistake.
- Forcing a blunt masonry bit through hard brick just cooks it faster and puts extra strain on the drill. Swap it out early when progress slows rather than fighting it for another ten holes.
Straight Shank vs SDS vs Multi Construction
Straight Shank Masonry Bits
These are the everyday choice for brick, block and lighter fixing work with combi drills and percussion drills. They are easier to carry as part of a normal drill kit, but they are not the right answer for repeated heavy drilling in dense concrete.
SDS Masonry Bits
SDS bits are for harder work and proper hammer drilling. If you are doing lots of holes in concrete or dense masonry, they are quicker, steadier and less punishing on your arms than trying to make a lighter setup do a heavy job.
Multi Construction Bits
These are handy when the material changes constantly and you do not want to swap bit types every five minutes. They are practical for mixed install work, but if the whole day is proper masonry drilling, a dedicated Festool masonry bit is still the better call.
Maintenance and Care
Clear Dust After Use
Brick and concrete dust packs into the flutes and hides wear. Give the bits a quick brush off after use so they cut properly next time and do not rust up in the case.
Check the Tip Before the Next Job
If the carbide tip is chipped or rounded, stop kidding yourself and replace it. A damaged tip will wander, drill slower and leave you with fixings that never feel right.
Store Sizes Properly
Keep bits in the case or a dedicated drill bit organiser rather than loose in the van. That stops tip damage and saves rooting around for the one size you always need in a rush.
Do Not Overheat Them
If progress drops off, back out and clear the dust rather than leaning harder on the drill. Excess heat shortens bit life fast, especially on repeated holes in dense concrete.
Why Shop for Festool Masonry Drill Bits at ITS?
Whether you need single Festool masonry drill bits for everyday fixing work, Festool masonry drill bit sets for install teams, or tougher options to match your Festool Drills and Drivers and Festool 18V Drills and Drivers, we stock the proper range. It is all held in our own warehouse, ready for next day delivery, so you can get the right Festool masonry bits UK trades actually use without hanging about.
Festool Masonry Drill Bits FAQs
What masonry drill bits does Festool make?
Festool makes masonry drilling options for common site fixing work, including standard Festool masonry drill bits for brick and block, plus SDS compatible options for tougher drilling. You will also find sets and single sizes depending on whether you want a top up for the case or a full spread for regular install work.
What materials can Festool masonry bits drill?
Festool masonry bits are built for brick, block, mortar and concrete. Some will handle denser material better than others, so the honest answer is to match the bit and drill to the wall. For soft block, most standard masonry bits are fine. For repeated concrete holes, step up to a proper SDS or heavier duty option.
What shank sizes are available for Festool masonry bits?
That depends on the bit type. Standard Festool masonry drill bits usually come with straight shanks for combi and percussion drills, while tougher drilling options may use SDS shanks for rotary hammers. Always check the shank before you order because that is the part that decides whether it fits your drill at all.
Are Festool masonry bits suitable for use with an SDS drill?
Only if they are the correct SDS type. A standard straight shank masonry bit is not meant for an SDS chuck. If you are using an SDS drill, buy the proper SDS fitting bit and save yourself the grief of poor fit, slipping or wrecking the job before you start.
Are Festool masonry drill bits any good for daily site use?
Yes, if you buy the right pattern for the work. For regular plug and fixing holes, they are reliable, accurate and tidy. Just do not expect a light straight shank bit to replace a proper SDS setup when you are into hard concrete all day.
Should I buy a Festool masonry drill bit set or singles?
If you are fitting varied jobs, a set makes sense because you will cover the common fixing sizes in one case. If you already know you burn through one or two sizes every week, singles are the smarter buy because they are quicker to replace and cheaper to top up.
