Dewalt Brick Hammers
DeWalt brick hammer options are made for cutting, trimming and dressing brick and block without reaching for the wrong hammer and wrecking the job.
If you're knocking faces off brick, trimming block, or cleaning up awkward edges, a proper DeWalt brick hammer saves time and gives you more control than a claw hammer ever will. This is the kit brickies, groundworkers and general builders reach for when they need a square strike face and a chisel end that actually works on masonry. Whether you want a DeWalt masonry hammer for everyday site use, a DeWalt bricklayers hammer for neat trimming, or a DeWalt scutch hammer for more aggressive material removal, match the weight to the work and get the right one on the van. You can also see the wider DeWalt hammers and mallets range if you need more than one type.
What Are DeWalt Brick Hammers Used For?
- Trimming bricks and blocks on site is where a DeWalt brick hammer earns its keep, letting you knock clean sections away without swapping between a bolster and the wrong hammer.
- Chipping back damaged corners and high spots on masonry is quicker with a DeWalt masonry hammer because the chisel end gives you better control on small corrective jobs.
- Cleaning up edges around openings, reveals and cut-ins helps brickies and builders keep coursing tidy when a full saw cut is not worth the faff.
- Breaking down small bits of blockwork and old brick during repair work is easier with a DeWalt bricklayers hammer, especially when you need controlled blows rather than brute force.
- Using a DeWalt scutch hammer for more aggressive surface removal makes sense when you are chasing back rough masonry or taking off stubborn material before making good.
Choosing the Right DeWalt Brick Hammer
Sorting the right one is simple: match the hammer weight and head style to the masonry work you actually do, not the one-off job you might do once a year.
1. 227g vs 567g
If you are doing lighter trimming, detail work and general bricklaying corrections, a DeWalt brick hammer 227g gives you better control and less arm fatigue. If you are into tougher block, harder brick and repeated strike work, a DeWalt brick hammer 567g gives you more authority so you are not over-swinging all day.
2. Standard Brick Hammer vs Scutch Hammer
If you mainly trim and split brick, stick with a standard DeWalt bricklayers hammer. If you need to rake back, clean off and remove rough material more aggressively, a DeWalt scutch hammer is the better shout and saves battering the wrong tool.
3. One Hammer or a Set
If you only need an everyday site hammer, buy the weight that suits most of your work. If different lads on site use different strike weights or you swap between trimming and rougher demolition prep, a DeWalt brick hammer set can make more sense than making one hammer do every job badly.
4. Handle Build and Grip
If the hammer lives in the bucket, gets wet and gets knocked about, pay attention to grip and handle construction. A comfortable, secure handle matters more than people admit once you are a few hundred strikes into a day and your hand starts slipping with dust on it.
Who Uses These on Site?
- Brickies use a DeWalt brick hammer for trimming bricks, knocking off frogs, and tidying cuts during day to day walling work when speed matters but the finish still has to look right.
- Groundworkers keep one handy for small block and edging jobs, especially when setting kerbs, adjusting masonry units, or sorting awkward bits without hauling over bigger breaking kit.
- General builders and chippies on refurbs reach for a DeWalt masonry hammer when opening up around old brickwork, making minor adjustments, or cleaning back damaged areas before the next trade goes in.
- Maintenance teams and snagging crews swear by these for quick repairs, because they can chip out loose mortar, trim replacement pieces and sort localised damage without turning a small fix into a full messy job.
Useful Extras for Brick and Masonry Work
A brick hammer does the striking, but these extras stop small masonry jobs dragging on longer than they should.
1. Safety Glasses
Get proper eye protection before you start chipping brick or mortar. Flying shards are no joke, and a pair of DeWalt safety glasses saves you learning that the hard way.
2. Demolition Bars
When the brick hammer has loosened material but it still needs levering out cleanly, DeWalt demolition bars save you from twisting the hammer into jobs it was never meant to do.
3. Lump Hammers
If the work turns from trimming into heavier breakup, step up to DeWalt lump hammers instead of belting away with a brick hammer that is built for more controlled masonry work.
Choose the Right DeWalt Brick Hammer for the Job
Use this quick guide to sort the right hammer for the work in front of you.
| Your Job | Brick Hammer Type | Key Features |
|---|---|---|
| General bricklaying and light trimming | 227g DeWalt brick hammer | Lighter in hand, better control, easier for repeated neat strikes. |
| Harder brick and heavier block adjustments | 567g DeWalt brick hammer | More striking force, less need to over-swing, better for tougher material. |
| Cleaning back rough masonry and mortar | DeWalt scutch hammer | Built for more aggressive material removal where a standard brick hammer is too limited. |
| Mixed site work with different users or tasks | DeWalt brick hammer set | Covers different weights or styles so the right hammer is always to hand. |
| Heavier breakup beyond trimming work | Specialist or lump hammer alternative | Use more mass for demolition jobs rather than forcing a brick hammer past its role. |
Common Buying and Usage Mistakes
- Buying a claw hammer for masonry work is the classic mistake. It is the wrong head shape, gives poor control on brick, and usually leaves you with rougher breaks and a battered tool.
- Choosing the heaviest hammer just because it looks tougher often backfires. Too much weight for everyday bricklaying tires your arm out and makes accurate trimming harder, so pick the weight for the material, not your ego.
- Using a standard brick hammer for full demolition work will shorten its life and slow you down. If the job has moved on to serious breakup, switch to a lump hammer or proper demolition kit.
- Ignoring eye protection when chipping mortar or brick is asking for trouble. Small shards travel fast, so wear safety glasses every time rather than hoping you can turn your head quick enough.
- Trying to lever with the hammer head instead of using a bar bends tools and makes the job clumsy. Use the hammer for striking and keep a demolition bar nearby for lifting and prising.
Brick Hammer vs Scutch Hammer vs Lump Hammer
DeWalt Brick Hammer
Best for trimming, dressing and splitting brick or light block on the go. It gives better control for neat masonry corrections, but it is not the right choice for heavy demolition or prolonged raking out.
DeWalt Scutch Hammer
Better when you need to chip back surfaces, rough off material or work mortar lines more aggressively. It is more specialised than a standard brick hammer, so it suits masonry prep more than everyday trimming.
DeWalt Lump Hammer
The one for heavier striking and breakup where mass matters more than finesse. Good for bolsters and harder demo tasks, but overkill for clean brick trimming and tiring if used all day for lighter work.
Which One Should You Buy?
For day to day bricklaying and masonry adjustment, buy the DeWalt brick hammer. For harsher surface removal, go scutch. For outright force and demolition prep, step up to a lump hammer and stop making one tool cover three jobs.
Maintenance and Care
Clean Off Dust and Mortar
Brush off brick dust and any stuck mortar after use. Letting it cake on makes the grip dirtier, the head harder to inspect and the whole hammer less pleasant to use next shift.
Check the Striking Faces
Look over the square face and chisel end for mushrooming, chips or damage. If the striking areas are badly worn or deformed, retire it before it starts throwing fragments or ruining your accuracy.
Keep the Handle Sound
If the grip gets slick with dust, lime or moisture, clean it properly. A secure hold matters with masonry work, and a slippery handle is exactly how glancing blows and sore knuckles happen.
Store It Dry
Do not leave the hammer rolling around in standing water in the van or bucket. Dry storage helps prevent corrosion and keeps the head and handle in better nick over time.
Use the Right Tool for the Job
A brick hammer lasts longer when it is used for masonry trimming rather than levering, full demolition or steel striking abuse. If the job changes, change the tool instead of wrecking the one in your hand.
Why Shop for DeWalt Brick Hammer Range at ITS?
Whether you need a lighter DeWalt brick hammer for neat trimming, a heavier option for tougher block, or want to compare against DeWalt specialist hammers, we stock the range trades actually buy. It is all in our own warehouse, ready for next day delivery, so you can get the right masonry kit on site without hanging about.
DeWalt Brick Hammer FAQs
What is the difference between a brick hammer and a claw hammer?
A brick hammer is made for masonry, not timber fixing. You get a square striking face and a chisel style end for trimming, splitting and dressing brick or block. A claw hammer is built for nails and prying timber apart, so it is the wrong shape for clean masonry work and usually makes a rougher job of it.
Is a DeWalt brick hammer suitable for chasing out mortar joints?
Yes, for light localised chasing and cleaning out small sections it will do the job. Be honest though, if you are doing a lot of mortar removal or need a tidier, more consistent joint, a scutch hammer or dedicated mortar tool is usually the better option and saves making hard work of it.
What weight brick hammer is best for general bricklaying?
For general bricklaying, many trades will prefer the lighter end such as a DeWalt brick hammer 227g because it is easier to control for repeated trimming and small corrections. If you are dealing with tougher materials more often, the DeWalt brick hammer 567g gives you more striking power, but it is more tiring over a full day.
Will a DeWalt brick hammer cope with block as well as brick?
Yes, that is normal site use for it. It is fine for trimming small sections of block, knocking off proud edges and making quick adjustments. Just do not confuse that with full block demolition. Once you need repeated heavy breakup, move to heavier striking kit.
Do I need a scutch hammer as well as a brick hammer?
Not always. If most of your work is standard trimming and dressing, a DeWalt brick hammer covers the basics well. If you regularly clean back rough masonry, rake out or remove surface material, adding a scutch hammer makes life easier and gives a better result.
Is a DeWalt brick hammer set worth it, or should I buy one hammer?
If you know exactly what weight and style you use every day, buy the single hammer and get on with it. A DeWalt brick hammer set is worth it when different jobs need different strike weights, or when more than one user on site wants their own setup without sharing one battered hammer.
