Bosch Pro 18V Screwguns & Screwdrivers
Fixing plasterboard all day? A Bosch 18V screwgun gives you repeatable screw depth without driving heads through the paper.
Dryliners use these cordless screwdrivers for boarding walls and ceilings. Check battery compatibility and whether a collated attachment is included before buying. Choose the setup that matches your fixing workload.
What Jobs Is a Bosch 18V Screwgun Best At?
- Fix plasterboard to timber studwork with a depth stop that helps recess screw heads without tearing through the board face.
- Board metal stud partitions using screws specified for the steel thickness, keeping fixing depth consistent across each sheet.
- Secure ceiling boards from a suitable working platform without trailing a power lead through the work area.
- Run repeated fixings along partition walls with a compatible collated attachment, reducing the need to handle individual screws.
Choosing the Right Bosch 18V Screwgun
Buy for the boards, framing and screw system you actually use, not just the battery voltage.
1. Loose Screws or Collated Feed
If you regularly board whole rooms, a Bosch 18V collated screwgun setup can cut screw handling. Check that the specific gun accepts the attachment and that your screw strips match its stated length and diameter limits. Do not assume the magazine comes with the tool.
2. Drywall Fixing or General Screwdriving
If plasterboard is the main job, choose a dedicated depth-controlled screwgun. If you need to drill pilot holes and drive varied fixings, compare the wider Bosch 18V Drills and Drivers range instead. A drywall gun is not a substitute for every drill or driver.
3. Battery Fit and Working Weight
Check the stated Bosch Professional battery compatibility before ordering a body-only tool. For overhead work, weigh runtime against the extra weight of a larger pack. Bosch Professional and Bosch DIY 18V batteries are not interchangeable.
Who Uses Bosch 18V Screwguns?
Dryliners and partition installers use a Bosch 18V drywall screwgun for repeated board fixing, where consistent depth matters more than drilling torque. Refurbishment teams use them when boarding rooms before plastering, with Bosch Pro 18V Drywall Cutters handling suitable cut-outs as the installation progresses.
The Basics: Understanding Drywall Screwguns
A Bosch 18V cordless screwgun controls repeated board fixings differently from a general drill driver.
1. Depth Control Rather Than Torque Alone
The nosepiece sets how far the screw enters the board. Set it on an offcut over the same framing first: the head should sit just below the surface without breaking the paper. Recheck when changing board or screw type.
2. Collated Feed for Repeated Fixings
A compatible magazine presents screws from a strip as you work. It reduces individual screw handling, but still needs the correct strips, driver bit and length setting. Keep the nose square to the board to reduce misfeeds.
Accessories to Keep Your Bosch Screwgun Working
Match accessories to the exact tool and attachment before starting a boarding run.
1. Compatible Collated Attachment
For repeated board fixing, a compatible magazine saves picking up each screw separately. Check tool compatibility and accepted screw dimensions before buying strips.
2. Replacement Driver Bits
Worn tips slip and damage screw recesses. Choose Bosch Pro Screwdriver Bits with the exact tip and length specified for your nosepiece or magazine.
3. Correct Replacement Bit Holder
A general extension can upset nosepiece clearance and fixing depth. Check Bosch Pro Drill & Screwdriver Bit Holders against the tool's specified holder dimensions rather than choosing by shank fit alone.
4. Spare Battery
Keep a charged spare ready so a flat pack does not stop the boarding run. Select compatible Bosch 18V Batteries and balance pack weight against the runtime you need.
Choose the Right Bosch 18V Screwgun for the Job
Start with the fixing workload, then check the supplied equipment.
| Your Job | Screwgun Setup | Key Features |
|---|---|---|
| Small boarding repairs | Depth-stop gun using loose screws | Adjustable fixing depth and correct screw tip |
| Full partition boarding | Gun with compatible collated magazine | Matched screw strips, bit length and feed settings |
| Repeated overhead fixing | Gun with a suitably sized battery | Manageable working weight and spare charged pack |
| Adding to existing Bosch Professional kit | Body-only gun | Confirmed battery compatibility and required accessories |
Common Buying and Usage Mistakes
- Assuming every Bosch screwgun includes a collated magazine leads to an incomplete setup. Check the supplied equipment list, not just the product image.
- Setting the nose too deep tears the plasterboard paper and weakens the fixing. Test on an offcut and adjust before boarding.
- Buying strips by screw length alone can cause feed problems. Confirm screw diameter, strip compatibility and the attachment's permitted range.
- Using the wrong screws for the framing causes poor penetration or insecure fixing. Match the screw specification to timber or the actual steel thickness.
Drywall Screwgun vs Drill Driver vs Impact Driver
Drywall Screwgun
Choose this for repeated plasterboard fixing. The depth nose helps produce consistent results, but the tool is less versatile for drilling and varied construction fixings.
Drill Driver
Choose a drill driver for pilot holes and mixed screwdriving. Its adjustable clutch is useful, but does not control plasterboard screw depth as directly as a dedicated screwgun nosepiece.
Impact Driver
Choose an impact driver for suitable construction screws and tougher driving work. It lacks a dedicated drywall depth stop, making it easier to overdrive board fixings.
Maintenance and Care
Clear Plaster Dust
Remove the battery before cleaning. Use a soft brush and suitable extraction to clear dust from the nose, magazine and ventilation openings without forcing debris inside.
Check Bits and Feed Parts
Replace rounded bits when they start slipping. Inspect the magazine for trapped strip fragments before adjusting settings or blaming the screws.
Store Dry
Wipe the tool down after use and keep it in a dry case. Do not pack it away beneath damp boards or leave batteries exposed to wet site conditions.
Repair Persistent Faults
If depth control or feed operation remains inconsistent after cleaning and fitting the correct consumables, stop and arrange inspection. Do not force a damaged magazine or defeat the clutch mechanism.
Why Shop for Bosch 18V Screwguns at ITS?
Shop the full Bosch 18V screwgun range at ITS, with body-only options and available kits alongside compatible fixing accessories. Stock is held in our own warehouse, ready for next-day delivery. Check the selected item's stock status, supplied equipment and delivery availability before ordering.
Bosch 18V Screwgun FAQs
What is a screwgun used for?
A drywall screwgun drives screws through plasterboard into suitable timber or metal framing. Its adjustable nose controls fixing depth, helping seat heads below the surface without breaking the paper. It is built for repeated fixing rather than general drilling.
Does the Bosch screwgun take collated screws?
Compatible Bosch drywall screwguns can use collated screws with the correct magazine attachment. Not every package includes one. Check the exact tool, attachment and screw-strip specifications before ordering.
Is the Bosch screwgun brushless?
Bosch offers brushless 18V drywall screwguns, but confirm the motor specification on the individual listing. The 18V rating alone does not establish whether a tool is brushless.
Are Bosch screwguns any good?
For repeated plasterboard fixing, a dedicated Bosch screwgun offers useful depth control and cordless working. The practical buying checks are working weight, compatible screw feed and your existing battery system. Correct screws and depth adjustment still determine the quality of the fixing.
Where are Bosch tools made?
Bosch manufactures tools in several countries, so the brand name does not identify a single country of manufacture. Check the tool's rating plate, packaging or product documentation for the origin of the specific model.
Will my green Bosch 18V battery fit this cordless screwdriver?
No. Bosch DIY Power for All batteries are a different system from Bosch Professional 18V batteries. Check the listed battery platform before buying a Bosch 18V cordless screwdriver body.
