Worx 20V Impact Drivers
A 20v impact driver is what you reach for when screws start fighting back, especially on long fixing jobs where a drill just chews wrists and bits.
For decking, timber framing, coach screws and repeated fixings into stud, a worx 20v impact driver gives you the fast bursts of torque that stop cam-out and save your arm by the end of shift. If you already run Worx 20V Drills and Drivers, it makes sense to keep everything on the same batteries and get the right driver for heavy screwdriving.
What Jobs Are 20v Impact Drivers Best At?
- Driving long timber screws into joists, studs and battens is where a 20v impact driver earns its keep, especially when you are doing repeat fixings all day and do not want a combi drill snatching your wrist.
- Fixing decking, fencing and outdoor timber work goes quicker with a worx cordless impact driver because the hammering action helps keep the bit engaged instead of slipping and rounding screw heads.
- Running coach screws and structural fixings into treated timber is far easier with a worx 20v impact screwdriver than with a standard drill driver, particularly once the timber starts getting dense or wet.
- Working in kitchen fitting, first fix carpentry or general site snagging, these drivers are handy for getting into tighter spots where a bulkier drill feels awkward over your head or in corners.
- Shifting rusty or stubborn screws during refit and maintenance work is another strong use, as the impact action helps break resistance without you having to lean all your weight onto the tool.
Choosing the Right 20v Impact Driver
Sorting the right one is simple: match it to the fixings you use most, not just the biggest torque number on the page.
1. Light Fixings vs Repeated Structural Screws
If you are mostly fitting hinges, brackets and shorter screws, a compact 20v impact driver is plenty. If you spend your day on timber work, ledger screws or long exterior fixings, go for the higher torque model so it does not run out of puff halfway in.
2. Body Only vs Full Kit
If you already own Worx 20V gear, a body only tool usually makes more sense and keeps the cost down. If this is your first step into the range, a worx 20v impact driver set with batteries and charger gets you working straight away.
3. Compact Access vs Runtime
If you are working in cupboards, between studs or above your head, keep the tool compact and balanced. If you are doing long runs of fixings outside, step up your battery size so you are not climbing down every hour to swap packs.
4. Battery Platform Matters
Do not buy into a one-tool dead end. If you want the same packs to cover site jobs and home or garden use, it is worth looking at the wider range including Worx 20V More Power Tools and Worx 20V Garden Power Tools.
Who Uses These on Site?
- Chippies and timber frame crews use a 20v impact driver for first fix, stud walls, noggins and sheet fixing because it keeps driving force up without beating up their wrist.
- Decking and fencing installers swear by a worx 20v impact driver when they are running hundreds of screws in a day and need something quicker and less tiring than a standard drill.
- Kitchen fitters and maintenance teams keep a worx battery impact driver close for cabinet screws, brackets and awkward fixings where compact size matters as much as torque.
- General builders and site teams often pair one with Worx 20V Combi Drills so they can drill with one tool and drive with the other instead of wasting time swapping bits all day.
The Basics: Understanding 20v Impact Drivers
An impact driver is built for driving screws and fixings hard and fast. It does that by adding rapid rotational impacts when resistance builds, which is why it feels easier on the wrist than a standard drill.
1. Impact Action vs Straight Drill Rotation
A standard drill just spins. A 20v impact driver spins and hammers rotationally when the screw bites, which helps keep the bit turning through tougher material instead of stalling or kicking back hard.
2. Hex Bits Only
These tools take quarter inch hex bits rather than a normal drill chuck. That makes bit changes quicker on site, but it also means they are mainly for driving screws, not general drilling duties.
3. Torque for Fixings, Not Masonry
If your main job is screws, bolts and structural fixings, an impact driver is the right tool. If you need to drill timber, metal and masonry as well, you will usually want it alongside a combi rather than instead of one.
Accessories That Keep Your 20v Impact Driver Working
A few sensible add-ons save wasted time, rounded screws and dead tools halfway through the job.
1. Impact Rated Bit Sets
Do not throw cheap standard bits in an impact driver and expect them to last. Proper impact rated bits cope better with the hammering and save you from snapped tips and chewed screw heads.
2. Spare Batteries and Chargers
A spare pack is a no-brainer if you are fixing all day, especially outside or up ladders. Keep a look at Worx 20V Batteries, Chargers and Mounts so you are not waiting on charge when the job should be moving.
3. Magnetic Bit Holders
These make life easier when you are offering up brackets, working one handed or reaching into awkward spots. Less dropped screws, less faff, quicker fixing.
Choose the Right 20v Impact Driver for the Job
Use this quick guide to sort the right type for your fixing work.
| Your Job | Category or Type | Key Features |
|---|---|---|
| Cabinet fitting, brackets and lighter fixings | Compact 20v impact driver | Lower weight, shorter body, easier overhead control and fast bit changes |
| First fix timber, battens and repeated stud screws | Mid torque worx 20v impact driver | Good balance of runtime, speed and enough punch for day to day site screwdriving |
| Decking, fencing and structural timber screws | Higher torque 20v impact driver | More fastening power, better for long screws and denser treated timber |
| Existing Worx users adding another bare tool | Body only worx cordless impact driver | No duplicate charger, cheaper way into the tool if you already own batteries |
| First tool in the range | Worx 20v impact driver set | Battery, charger and case or bag so you can get straight on with the job |
Common Buying and Usage Mistakes
- Buying on torque alone can backfire if the tool ends up too bulky for the work you actually do. If most of your jobs are kitchen fitting or lighter fixings, balance and access matter as much as headline power.
- Using cheap non impact bits is a fast way to round screws and snap accessories. Fit proper impact rated bits and the driver will work cleaner and last better.
- Expecting an impact driver to replace a drill causes frustration. It is built for driving screws and fixings, so if you still need to drill masonry or standard round shank bits, keep a combi alongside it.
- Ignoring battery size leads to too many charge stops on bigger fixing jobs. Small packs keep the tool lighter, but for decking or repeated timber screws you will want more runtime.
- Leaning too hard on the tool is another common one. Let the impact mechanism do the work or you will wear yourself out and still end up with poor bit engagement.
Impact Drivers vs Combi Drills vs Drill Drivers
20v Impact Driver
Best for screws, coach bolts and repeated fixings into timber or sheet materials. It is quicker, more compact and easier on the wrist than a drill when the work is mainly fastening.
Combi Drill
Better if you need one tool to drill wood, metal and light masonry as well as drive screws. It is more versatile, but usually not as clean or as comfortable as an impact driver for long fixing runs.
Drill Driver
A drill driver suits lighter screwdriving and general drilling where control matters more than brute fastening force. It is fine for assembly and second fix, but it will struggle sooner on long or stubborn screws.
Maintenance and Care
Keep the Collet Clean
Dust, metal filings and site muck build up around the bit holder quickly. Brush it out now and then so bits seat properly and do not start sticking.
Use the Right Bits
Impact rated bits are not optional on these tools if you use them properly. They last longer under repeated shock loads and help protect the collet from needless wear.
Look After Batteries
Do not leave packs flat for ages in a cold van. Charge them before storage, keep the terminals clean and swap them out if runtime drops off badly under normal site use.
Wipe Down After Wet or Dusty Jobs
A quick wipe after outdoor work or dusty first fix jobs stops grime getting into vents and controls. It takes two minutes and helps the tool last longer.
Replace Worn Bits Early
If the bit is twisting, rounding or slipping, bin it. Carrying on with a worn tip just wrecks screw heads and makes the driver feel worse than it is.
Why Shop for 20v Impact Drivers at ITS?
Whether you need a compact worx 20v impact driver for lighter fixing work or a fuller worx 20v impact driver set for day one, we stock the proper range. That means the key Worx types, kits, batteries and matching gear are all in our own warehouse, picked by our team and ready for next day delivery.
Worx 20v Impact Driver FAQs
How much torque does a 20V impact driver have?
It depends on the model, but a 20v impact driver is built to deliver far more fastening force than a standard drill driver. In real site terms, that means enough punch for long screws, structural timber fixings and stubborn screws without the tool constantly stalling.
Is the Worx 20V impact driver suitable for trade use?
Yes, for plenty of trade fixing jobs it is a solid bit of kit. If you are fitting kitchens, doing first fix carpentry, decking, fencing or general site maintenance, a worx 20v impact driver handles repeated screwdriving well. Just match the model and battery setup to how hard you use it.
Does the Worx 20V impact driver come with a battery?
Not always. Some are body only, which is ideal if you already run Worx cordless tools, and some come as a kit with battery and charger. Check the listing properly before you buy so you do not end up with a bare tool and no way to use it tomorrow morning.
What is the difference between an impact driver and a combi drill?
An impact driver is mainly for driving screws and fixings fast, using rotational impacts to keep turning under load. A combi drill is the more general all rounder for drilling wood, metal and masonry as well as lighter screwdriving. Most trades get the best results by keeping one of each.
Will a worx cordless impact driver take normal drill bits?
Only hex shank accessories that fit the quarter inch collet. Standard round shank drill bits will not go straight in, so this is not the tool to buy if your main work is general drilling rather than screwdriving.
Is a worx 20v impact driver too aggressive for smaller screws?
It can be if you are heavy handed. For smaller fixings, use the lower speed settings if fitted, keep steady pressure on the bit and stop once the screw is seated. It is powerful, but with a bit of control it is still useful for lighter work.
