Vaunt Ratchet Straps, Tie Downs & Bungees
Vaunt ratchet straps keep loads tight in the van, on the trailer, or in the back of the pickup, so gear stays put instead of shifting about on the road.
If you're sick of kit sliding round corners or loosening off before you hit site, this is the sort of gear to keep in the van full time. Vaunt ratchet straps, Vaunt tie downs and Vaunt bungee cords are built for securing tools, materials and awkward loads properly. If you already rate Vaunt CCTV & Security or Vaunt Tool Storage, this range makes the same kind of sense for day to day transport jobs. Pick the right length, hook style and load rating, then get your load securing straps sorted.
What Are Vaunt Ratchet Straps Used For?
- Securing toolboxes, tubs and stacked materials in the van stops everything sliding about on roundabouts and saves opening the doors to a pile of loose kit.
- Strapping down sheet goods, ladders and longer lengths on trailers or roof racks keeps awkward loads tight when the weather turns or the road gets rough.
- Holding plant, generators and heavier site gear in place during transport gives you a firmer hold than rope and cuts down the risk of damage on the move.
- Using Vaunt bungee cords for lighter grab and go jobs is handy when you need quick tension on covers, cables or lighter items that do not need a full ratchet lashing strap.
- Sorting mixed van and trailer loads with Vaunt tie downs helps fitters, maintenance teams and site lads keep gear organised between callouts without wasting time reloading.
Choosing the Right Vaunt Ratchet Straps
Sorting the right strap is simple: match it to the load, not the guesswork. Do not use a light strap for a load that wants proper restraint.
1. Load Rating Comes First
If you are tying down machinery, stacked materials or anything with real weight behind it, check the working load limit before anything else. For lighter van kit, a smaller strap may do the job, but for heavier loads you need proper rated ratchet lashing straps, not wishful thinking.
2. Strap Length Wants to Suit the Job
If the strap is too short, you will be fighting it every time. If it is far too long, you end up with loose tail everywhere. For van loads and boxed kit, shorter straps are easier to live with. For trailers, palletised gear and longer materials, go longer so you can route it properly.
3. Ratchet Straps or Bungee Cords
Use Vaunt ratchet straps when the load must stay fixed and secure in transit. Use Vaunt bungee cords for lighter gear, covers and quick bundling where a bit of stretch helps. Do not treat bungees as a substitute for proper tie downs on heavy loads.
4. Think About Hooks and Anchor Points
If your van, trailer or rack has awkward fixing points, make sure the end fittings actually suit what you are tying into. A good strap is no use if the hooks do not sit right or keep twisting under tension.
Who Uses These on Site?
- Chippies and general builders keep Vaunt ratchet straps in the van for holding sheet timber, doors and packs of trim still on the run between merchants and site.
- Groundworkers and landscapers use them for tying down compact plant, fuel cans and muddy gear on trailers where a loose load soon becomes a problem.
- Sparkies, plumbers and maintenance teams swear by Vaunt tie downs for stopping packout boxes, steps and testing kit sliding about all week.
- Site managers and delivery teams reach for Vaunt bungee cords when they need a quick hold on lighter items, covers or barriers without dragging out heavier cargo straps.
Useful Extras for Vaunt Ratchet Straps and Tie Downs
A few sensible extras make load securing quicker, safer and less of a faff when you are rushing to get off site.
1. Edge Protectors
These stop straps rubbing across sharp timber, metal edges or block corners and save you from finding a frayed strap when you need it most.
2. Trailer or Van Anchor Points
If your fixing points are poor or badly placed, load securing becomes guesswork. Proper anchor points give you somewhere solid to pull against and make the whole job more secure.
3. Storage Bag or Strap Wraps
Loose straps turn into a tangled mess in the van. Keeping them wrapped or bagged means you can grab the right one fast instead of wasting ten minutes sorting knots and twisted webbing.
Choose the Right Vaunt Ratchet Straps for the Job
Use this quick guide to sort lighter hold jobs from proper load restraint.
| Your Job | Category or Type | Key Features |
|---|---|---|
| Keeping toolboxes and site tubs from sliding in the van | Short Vaunt ratchet straps | Compact length, fast tensioning, firmer hold on boxed kit |
| Strapping ladders, boards or long materials to a rack or trailer | Longer Vaunt tie downs | Extra reach, stronger hold, easier routing around awkward loads |
| Holding generators, compact plant or heavy gear in transit | Higher rated ratchet lashing straps | Clear working load limit, solid hooks, proper restraint under weight |
| Securing covers, hoses or lighter loose items quickly | Vaunt bungee cords | Quick fit, elastic tension, handy for lighter non critical hold jobs |
Common Buying and Usage Mistakes
- Buying on length alone is where loads start going wrong. You need the right working load limit as well, otherwise the strap may not be suitable for what you are tying down.
- Using bungee cords for heavy restraint is a bad habit. They are fine for lighter kit and covers, but heavier loads want proper ratchet straps that lock down tight.
- Ignoring strap wear shortens the life of the kit and risks failure. If the webbing is cut, badly frayed or the ratchet is bent, replace it rather than gambling on one more journey.
- Twisting the strap through the load makes tensioning awkward and reduces proper contact. Lay the webbing flat and keep the ratchet straight so it pulls evenly.
- Securing to weak points on the van or trailer undoes the whole job. Always hook into proper anchor points that can take the load you are applying.
Ratchet Straps vs Tie Downs vs Bungee Cords
Vaunt Ratchet Straps
These are the ones for proper restraint. They let you crank the load down tight and keep heavy or awkward gear from shifting in the van or on a trailer. If the load has weight, this is usually the right place to start.
Vaunt Tie Downs
Tie downs is the broader category and can cover different securing styles depending on the job. They are useful when you want a simple fixing method, but check whether you need full ratchet tension or just lighter restraint.
Vaunt Bungee Cords
These are for quick, lighter jobs where stretch is useful, such as holding a cover, bundling hoses or stopping light items moving about. They are not the thing for heavy loads, plant or anything that must stay rigidly fixed.
Maintenance and Care
Check Webbing After Use
Look for cuts, melted spots, fraying and worn edges after each job, especially if the strap has been pulled over rough timber, steel or brick packs.
Keep the Ratchet Clean
Mud, grit and dried plaster soon make ratchets stiff. Brush them out and keep the mechanism moving freely so you are not fighting it at six in the morning.
Store Straps Dry and Wrapped
Do not just fling them in a wet van corner. Coil them up, keep them out of standing water and stop the hooks battering the webbing in transit.
Replace Damaged Parts Early
If the ratchet is bent, the hook is distorted or the strap is badly worn, bin it and replace it. Load securing gear is not where you squeeze out another month.
Why Shop for Vaunt Ratchet Straps at ITS?
Whether you need light duty Vaunt bungee cords, everyday van tie downs or heavier ratchet lashing straps for tougher transport work, we stock the full range in one place. You can also shop Site and Vehicle Security, the wider Ratchet Straps, Tie Downs & Bungees range, or more from Vaunt Site and Vehicle Security. It is all held in our own warehouse, in stock and ready for next day delivery.
Vaunt Ratchet Straps FAQs
What ratchet straps does Vaunt make?
Vaunt makes a practical range of ratchet straps, tie downs and bungee cords for van, trailer and site transport jobs. The range typically covers different lengths, hook styles and load ratings, so you can match the strap to lighter kit, longer materials or heavier cargo properly.
Are Vaunt ratchet straps suitable for heavy loads?
Yes, many Vaunt ratchet straps are suitable for heavier loads, but only if the working load limit matches what you are securing. That is the bit to check, not just the width or the look of the strap. For plant, stacked materials or dense kit, always choose a strap with enough rated capacity for the job.
What is the working load limit of Vaunt ratchet straps?
The working load limit depends on the exact Vaunt strap you are looking at, and it should be clearly listed on the product details and usually on the strap labelling itself. Treat that figure as your safe guide for day to day use. If you are anywhere near the limit, step up to the next rating rather than chance it.
Are Vaunt tie downs compliant with EN safety standards?
Many Vaunt tie downs are made to relevant EN standards, but you should check the individual product specification before buying if compliance is a job requirement. On proper site and transport work, that detail matters, especially if you are moving heavier loads or working to company fleet rules.
Will these straps put up with life in the van, or do they wear out fast?
They are built for regular transport use, but like any load securing gear, they last best if you keep them off sharp edges, out of standing water and away from constant abrasion. Used properly, they hold up well. Abused against rough steel and concrete all week, any strap will suffer.
Can I use Vaunt bungee cords instead of ratchet straps?
For light jobs, yes. For heavy restraint, no. Bungee cords are handy for covers, hoses and lighter loose items, but if the load needs locking down so it does not move in transit, use Vaunt ratchet straps instead.
