Trend PPE
Trend PPE keeps you protected on dusty, noisy, messy site jobs where you cannot risk a slip-up.
When you are cutting MDF, chasing walls, sanding filler, or ripping sheet all day, decent protection is not optional. Trend PPE is built for real trade graft, with kit that fits properly, stays put, and makes it easier to keep working safely.
What Is Trend PPE Used For?
- Cutting MDF, ply, and sheet materials where fine dust hangs in the air and you need reliable respiratory protection that seals properly.
- Chasing, drilling, and grinding masonry where airborne grit gets everywhere and eye protection stops you losing time to irritation and injuries.
- Working around loud kit like breakers, grinders, and saws where hearing protection keeps you sharp at the end of the day, not ringing for hours.
- Sanding, routing, and trimming indoors on refurbs where you need PPE that is comfortable enough to keep on, not something you rip off after ten minutes.
- General site clean-up and snagging where dust and debris still catch you out, especially in tight cupboards, lofts, and plant rooms.
Who Is Trend PPE For on Site?
- Chippies, kitchen fitters, and joiners cutting sheet goods and trimming all day, because dust and chips are constant, not occasional.
- Sparks and plumbers on refurbs who are forever drilling, chasing, and working in lofts, because the worst dust is usually in the tightest spaces.
- Decorators and plasterers sanding filler and walls, because fine dust gets in your eyes and lungs fast if you get lazy with protection.
- Site managers and working foremen topping up van stock, because having spare masks and eye protection on hand stops jobs stalling.
Choosing the Right Trend PPE
Pick PPE to match the hazard in front of you, not what is cheapest on the shelf.
1. Respiratory protection that matches the dust
If you are cutting MDF, sanding, or chasing plaster and masonry, do not mess about with a loose, flimsy mask. Go for a properly rated, well-fitting option that seals around the face, and keep spares in the van so you are not tempted to "just do one cut".
2. Eye protection that works with the rest of your kit
If you wear specs or you are pairing with a dust mask, choose eyewear that does not gap or fog up straight away. If it steams up and you keep lifting it, it is not protecting you when it matters.
3. Hearing protection for the time you are exposed
If you are on breakers, grinders, or saws for long spells, comfort is the deciding factor because you will only wear what you can stand all day. For quick, noisy bursts, keep something compact in your pocket so you actually use it.
The Basics: Understanding PPE Ratings on Site
PPE is only useful if it is the right type for the hazard and it fits well enough to stay on. Here is what to look for when you are choosing.
1. Respiratory protection is about seal and filtration
A mask that leaks around your nose or cheeks is basically decoration. For fine dust from MDF, plaster, and masonry, you need a mask that seals properly and is rated for the job, otherwise you are still breathing it in.
2. Eye protection needs coverage, not just a lens
On grinders, drills, and saws, debris comes from odd angles, not just straight on. Better wrap and a stable fit stops chips getting in round the sides when you are working overhead or in corners.
3. Hearing protection is about consistent use
The best hearing protection is the one you keep on when the noise starts. If it clamps too hard or gets in the way of a visor or hood, you will take it off, so pick something you can actually wear for the length of the task.
Trend PPE Add-Ons That Keep You Working
The right spares and extras stop you reusing worn kit or going without when the job turns dusty or noisy.
1. Replacement filters and pre-filters
If you are using reusable respiratory kit, keep spare filters ready. A clogged filter makes breathing harder and lads start loosening masks, which is exactly when dust gets in.
2. Spare disposable masks
Have a pack in the van for visitors, labour, or when one gets damp or crushed in the tool bag. It saves the usual "I will be quick" shortcut that turns into an hour of cutting.
3. Anti-fog wipes and lens cleaning kit
Fogged or filthy lenses mean you keep lifting your glasses or wiping them with a dusty glove. A proper cleaner keeps your eye protection usable, especially on warm refurbs and tight rooms.
4. Spare ear plugs for the tool bag
Ear protection only works if it is on you when the grinder comes out. Keep a few pairs in your pockets and bags so you are not caught out when the noise starts.
Why Shop for Trend PPE at ITS?
Whether you are topping up van stock or kitting out a full crew, we have the Trend PPE range to cover dusty cutting, loud tools, and day-to-day site protection. It is all held in our own warehouse, in stock and ready for next day delivery.
Trend PPE FAQs
Is Trend PPE actually suitable for dusty MDF and plaster work, or is it just for light DIY?
It is built for proper trade use, but you still need to choose the right rated respiratory protection for fine dust and make sure it seals to your face. If it does not fit, it does not protect, no matter whose logo is on it.
How do I stop safety glasses fogging up when I am wearing a mask?
Fogging is usually a fit issue, where warm breath is venting upwards. Start by getting the mask seated properly across the nose, then use glasses with better coverage and keep lenses clean. If you are constantly lifting them, swap to a better fitting pair.
Will Trend hearing protection get in the way with hoods, hard hats, or visors?
Some styles pair up better than others. If you are in a hard hat or visor setup, go for hearing protection that sits comfortably without breaking the seal or pushing your headgear out of position, otherwise you will end up not wearing it.
How often should I replace masks or filters on site?
Disposable masks should be binned when they are dirty, damp, crushed, or no longer seal properly. Reusable filters should be changed when breathing resistance goes up or they are past their service life. If you can smell dust or you are constantly adjusting the fit, it is time to swap.
Is PPE still worth it if I am using dust extraction on my tools?
Yes. Extraction helps massively, but it does not catch everything, especially on awkward cuts, overhead drilling, or when someone else is making dust nearby. PPE is the backstop that keeps you protected when the site is not perfect.
