Festool 577985 OFKC 500 R3 18V EB-Basic Edge Router - Body & Case
£394.99
YOU SAVE £55.00 (14%)
£339.99
EX VAT
(£407.99 INC VAT)
Festool 577985 OFKC 500 R3 18V EB-Basic Edge Router - Body & Case
Key Features
- EC-TEC brushless motor delivers up to 25,000rpm with low noise and vibration.
- Micro-adjustable 0.1mm depth control with 10mm cutter stroke.
- Lightweight 1.2kg body with rear-angled battery for perfect balance.
- Flush ball-bearing mount allows ultra-low 12mm cutter height.
- Spring-loaded dust hood with 27mm Bluetooth extraction port.
YOU SAVE £55.00 (14%)
£394.99
£339.99
EX VAT
-
Promotion
-
Promotion
-
Promotion
-
Promotion
-
Promotion
UNLOCK a 4.0Ah Tabless Battery for £4 when you spend £400 Ex VAT on Festool Worth £109.99
Ends in -
Promotion
-
Promotion
-
Free Gift
-
Promotion
-
Promotion
-
Promotion
Description
-
Product Code:FES577985
-
Model Number: OFKC 500 R3
-
Brand: Festool
-
Barcode: 4014549445228
-
Taxonomy: Hardware > Tools > Routing Tools
-
Category: Routers & Trimmers
The Festool OFKC 500 Cordless Edge Router from ITS is engineered for tradespeople who demand precision, mobility, and flawless finishing on every edge.
Whether you're trimming veneer, chamfering cabinet doors, rebating stacked panels, or profiling delicate trim, this lightweight 18V edge router delivers exceptional results-without a cable in sight.
Built around Festool’s proven EC-TEC brushless motor, the OFKC 500 operates with ultra-low vibration and reduced noise output, all while delivering high-efficiency performance across a broad range of routing applications.
It achieves an impressive idle speed range of 10,000–25,000rpm, allowing you to precisely match the speed to your cutter and material for clean, accurate, burn-free finishes every time.
The motor’s intelligent control electronics maintain constant speed under load for uninterrupted results on hardwood, MDF, laminates, or softwoods.
Routing depth can be adjusted with pinpoint accuracy to 0.1mm, thanks to an integrated micro-adjustment mechanism and precision locking dial. This system gives you a full 10mm of fine-tuning stroke, allowing for both deep shaping passes and ultra-shallow trimming work.
Once your depth is set, the lock prevents any shifting during use-critical for maintaining repeatable accuracy across panels or workpieces.
With a maximum cutter diameter of 28mm, the OFKC 500 supports a wide variety of cutters for chamfering, rounding, flush trimming, and edge profiling.
Bit changes are fast and safe using the built-in spindle stop system, eliminating the need for extra tools or downtime. The flush ball-bearing mount keeps the cutter height low-just 12mm from the base-perfect for trimming along stacked layers or rebating close to the edge.
Designed for ultimate control, the router weighs just 1.2kg and features a slimline body with a tilted battery mount for ideal centre of gravity. This layout allows effortless one-handed operation, even during vertical or overhead routing tasks.
The router glides smoothly over your material with the help of a hard fibre base runner, which is both glide-friendly and scratch-resistant-ideal for working on finished or delicate surfaces.
A clear, spring-loaded dust extraction hood is included as standard. It adapts automatically to the material surface to provide reliable chip removal while simultaneously acting as a brake to prevent scorching or burn marks.
The 27mm dust port connects directly to Festool cordless Bluetooth-enabled extractors, triggering automatic extraction the moment the tool is activated for a cleaner, safer, more efficient workflow.
Fully compatible with Festool’s cutter range, the OFKC 500 ensures seamless integration into the Festool routing system-making it the perfect cordless edge router for high-end furniture production, kitchen fitting, site work, and fine finishing jobs alike.
Specification
| Voltage | 18V |
| Battery Type | Lithium-Ion |
| Number of Batteries | 0 |
| Charger Included? | No |
| Battery Compatibility | Festool 18V Li-Ion |
| Includes Case | Yes |
| Brushless Motor | Yes |
| Speed Control | Fixed |
| No Load Speed (RPM) | 10000-25000 |
| Power Supply | Cordless |
| Buying Option | Body and Case |
| Pack Size | 1 |
| Product Weight | 1.2kg |
Warranty Information
FESTOOL SERVICE ALL INCLUSIVE - Cost & Theft Protection, Money Back Guarantee and a whole lot more.
Find out more by clicking here
Festool 3 Year Extended Warranty.
FREE product registration required otherwise standard 1 Year applies.
To register complete your warranty card supplied with your purchase or go to www.festool.co.uk
(more information will be supplied with your product).
Customer Reviews
Ask a Question
Questions Answered
Key Features
- EC-TEC brushless motor delivers up to 25,000rpm with low noise and vibration.
- Micro-adjustable 0.1mm depth control with 10mm cutter stroke.
- Lightweight 1.2kg body with rear-angled battery for perfect balance.
- Flush ball-bearing mount allows ultra-low 12mm cutter height.
- Spring-loaded dust hood with 27mm Bluetooth extraction port.
Description
Description
-
Product Code:FES577985
-
Model Number: OFKC 500 R3
-
Brand: Festool
-
Barcode: 4014549445228
-
Taxonomy: Hardware > Tools > Routing Tools
-
Category: Routers & Trimmers
The Festool OFKC 500 Cordless Edge Router from ITS is engineered for tradespeople who demand precision, mobility, and flawless finishing on every edge.
Whether you're trimming veneer, chamfering cabinet doors, rebating stacked panels, or profiling delicate trim, this lightweight 18V edge router delivers exceptional results-without a cable in sight.
Built around Festool’s proven EC-TEC brushless motor, the OFKC 500 operates with ultra-low vibration and reduced noise output, all while delivering high-efficiency performance across a broad range of routing applications.
It achieves an impressive idle speed range of 10,000–25,000rpm, allowing you to precisely match the speed to your cutter and material for clean, accurate, burn-free finishes every time.
The motor’s intelligent control electronics maintain constant speed under load for uninterrupted results on hardwood, MDF, laminates, or softwoods.
Routing depth can be adjusted with pinpoint accuracy to 0.1mm, thanks to an integrated micro-adjustment mechanism and precision locking dial. This system gives you a full 10mm of fine-tuning stroke, allowing for both deep shaping passes and ultra-shallow trimming work.
Once your depth is set, the lock prevents any shifting during use-critical for maintaining repeatable accuracy across panels or workpieces.
With a maximum cutter diameter of 28mm, the OFKC 500 supports a wide variety of cutters for chamfering, rounding, flush trimming, and edge profiling.
Bit changes are fast and safe using the built-in spindle stop system, eliminating the need for extra tools or downtime. The flush ball-bearing mount keeps the cutter height low-just 12mm from the base-perfect for trimming along stacked layers or rebating close to the edge.
Designed for ultimate control, the router weighs just 1.2kg and features a slimline body with a tilted battery mount for ideal centre of gravity. This layout allows effortless one-handed operation, even during vertical or overhead routing tasks.
The router glides smoothly over your material with the help of a hard fibre base runner, which is both glide-friendly and scratch-resistant-ideal for working on finished or delicate surfaces.
A clear, spring-loaded dust extraction hood is included as standard. It adapts automatically to the material surface to provide reliable chip removal while simultaneously acting as a brake to prevent scorching or burn marks.
The 27mm dust port connects directly to Festool cordless Bluetooth-enabled extractors, triggering automatic extraction the moment the tool is activated for a cleaner, safer, more efficient workflow.
Fully compatible with Festool’s cutter range, the OFKC 500 ensures seamless integration into the Festool routing system-making it the perfect cordless edge router for high-end furniture production, kitchen fitting, site work, and fine finishing jobs alike.
Specification
- Voltage 18V
- Battery Type Lithium-Ion
- Number of Batteries 0
- Charger Included? No
- Battery Compatibility Festool 18V Li-Ion
- Includes Case Yes
- Brushless Motor Yes
- Speed Control Fixed
- No Load Speed (RPM) 10000-25000
- Power Supply Cordless
- Buying Option Body and Case
- Pack Size 1
- Product Weight 1.2kg
Warranty Information
Warranty Information
FESTOOL SERVICE ALL INCLUSIVE - Cost & Theft Protection, Money Back Guarantee and a whole lot more.
Find out more by clicking here
Festool 3 Year Extended Warranty.
FREE product registration required otherwise standard 1 Year applies.
To register complete your warranty card supplied with your purchase or go to www.festool.co.uk
(more information will be supplied with your product).
Accessories you may need
Products in the range
FAQ


