A good extractor which works well and is very...
A good extractor which works well and is very efficient.
(£911.99 INC VAT)
£759.99
EX VAT
Festool CLEANTEC CTM 26 EI Electric M-Class Mobile Dust Extractor - 240V
The Festool CLEANTEC CTM 26 EI Electric M-Class Mobile Dust Extractor from ITS is a true all-rounder cleaner that can be connected to your power tools for immediate dust extraction or used as a cleaner for cleaning wet or dry materials in your work area.
Thanks to a T-LOC function on the top, the versatile dust extractor is expandable and is compatible with other cases or tools that have a T-LOC connection. Furthermore, the CLEANTEC CTM 26 EI includes an additional power socket on the front so that both power tools and the extractor can run directly from a single mains point. It will also accept additional modules for increased versatility.
Suitable for general wet and dry cleaning as well, the extractor includes an M-Class filter* and can be directly to attached to power tools for exceptional dust extraction at the point of creation. M-Class dust extractors are a minimum requirement for anyone working on sites and who may be exposed to dust according to HSE guidelines.
For compatible tools, the cleaner has a permanently installed Bluetooth interface that lets the extractor start at the same time as the power tool so as to deal with dust or debris at the point of creation.
For continuous usage, the extractor includes FlowDetect Health protection. The flow sensor checks for a minimum air speed of 20 m/sec and issues a warning if the air speed falls below this value.
With variable suction rates, the extractor includes an intuitive touch control for easier operation, even while wearing work gloves. The filter bag is free to unfold because of the flat filter and the smooth inner contours of the container. This allows the bag to be filled uniformly and a nearly 100% utilisation of the filter bag volume.
The large wheels prevent the extractor from tipping over and easily overcome small obstacles. The locking brake ensures that the extractor will remain in place. Because of the location of its centre of gravity, the extractor is easy to carry.
* M- Class Filter: M Class < (Less than) 0.1% Dusts with maximum allowable concentrations (MAC) ≥ 0.1 mg/m³ for hard woods, board materials, concrete and brick dust.
| Voltage | 240V |
| Includes Case | No |
| Air Flow Rate | 3,900.00 l/min |
| Tank Capacity | 26 Litre |
| Filter Bag Capacity | 24 Litres |
| Filter Surface Area | 6318 cm2 |
| Hose Length | 3.5m |
| Amperage | 350-1200W |
| Hose Width/Diameter | 27 / 32mm |
| Suction Rate | 24,000.00 Pa |
| Dust Extractor/Vacuum Filter Class | M-Class |
| Power Supply | Corded |
| Dimensions | 630 x 365 x 540mm |
| Buying Option | M-Class Extractor |
| Pack Size | 1 |
| Product Weight | 17.22kg |
M Class < (Less than) 0.1% Dusts with maximum allowable concentrations (MAC) ≥ 0.1 mg/m³ for hard woods, board materials, concrete and brick dust.
Description
The Festool CLEANTEC CTM 26 EI Electric M-Class Mobile Dust Extractor from ITS is a true all-rounder cleaner that can be connected to your power tools for immediate dust extraction or used as a cleaner for cleaning wet or dry materials in your work area.
Thanks to a T-LOC function on the top, the versatile dust extractor is expandable and is compatible with other cases or tools that have a T-LOC connection. Furthermore, the CLEANTEC CTM 26 EI includes an additional power socket on the front so that both power tools and the extractor can run directly from a single mains point. It will also accept additional modules for increased versatility.
Suitable for general wet and dry cleaning as well, the extractor includes an M-Class filter* and can be directly to attached to power tools for exceptional dust extraction at the point of creation. M-Class dust extractors are a minimum requirement for anyone working on sites and who may be exposed to dust according to HSE guidelines.
For compatible tools, the cleaner has a permanently installed Bluetooth interface that lets the extractor start at the same time as the power tool so as to deal with dust or debris at the point of creation.
For continuous usage, the extractor includes FlowDetect Health protection. The flow sensor checks for a minimum air speed of 20 m/sec and issues a warning if the air speed falls below this value.
With variable suction rates, the extractor includes an intuitive touch control for easier operation, even while wearing work gloves. The filter bag is free to unfold because of the flat filter and the smooth inner contours of the container. This allows the bag to be filled uniformly and a nearly 100% utilisation of the filter bag volume.
The large wheels prevent the extractor from tipping over and easily overcome small obstacles. The locking brake ensures that the extractor will remain in place. Because of the location of its centre of gravity, the extractor is easy to carry.
* M- Class Filter: M Class < (Less than) 0.1% Dusts with maximum allowable concentrations (MAC) ≥ 0.1 mg/m³ for hard woods, board materials, concrete and brick dust.
Features We Love
M Class < (Less than) 0.1% Dusts with maximum allowable concentrations (MAC) ≥ 0.1 mg/m³ for hard woods, board materials, concrete and brick dust.
Specification
Accessories you may need