METABO WALL CHASERS
Metabo wall chaser tools cut clean, straight channels into brick, block and plaster for cable runs, conduit and pipework without the faff of chasing by hand.
If you're rewiring, adding sockets or running pipe in solid walls, a proper wall chaser Metabo setup saves hours and leaves a neater job for second fix. Paired with a metabo wall chaser and hoover, dust stays under control, cuts stay visible, and you're not sweeping half the room afterwards. If you need more specialist kit, check Metabo More Power Tools and get the right machine for the chase.
What Are Metabo Wall Chasers Used For?
- Chasing out straight cable runs in blockwork and plastered walls makes first fix quicker and tidier than trying to score and hack it out by hand.
- Cutting twin slots for conduit or small pipework in refurbs helps keep depth and width consistent, so you are not fighting uneven channels when it comes to fixing in.
- Working room to room on rewires, a metabo wall chaser and hoover setup keeps airborne dust down and lets you see the line properly while you cut.
- Opening neat channels for back box feeds and vertical drops saves time on snagging because the chase is cleaner, straighter and easier to fill after first fix.
Choosing the Right Metabo Wall Chaser
Sorting the right one is simple: match the machine to the wall, the chase size and how often you are doing the job.
1. Cut Depth and Width First
If you are only chasing for standard cable drops, you do not need the biggest machine in the range. If you are cutting for conduit or small pipework, make sure the wall chaser has the depth and spacer setup to give you enough width in one pass.
2. Dust Extraction Is Not Optional
If you are working indoors, buy the machine as part of a proper extraction setup, not on its own. A metabo wall chaser and hoover setup keeps the line visible, stops the room choking up and saves a load of clean-up at the end.
3. Think About the Wall Material
If most of your work is plaster over block, a standard unit will cover it. If you are regularly into harder brick or denser masonry, go for the model that is happier under load and pair it with decent blades, not the cheapest ones you can find.
4. Weight Matters on Repetitive Work
If you are doing one or two chases on a snagging job, nearly any suitable model will do. If you are on a full rewire cutting verticals all day, a well-balanced machine that is easier to control will save your shoulders and help you keep the cuts straight.
Who Uses These on Site?
- Sparkies use a metabo wall chaser for socket drops, horizontal cable routes and conduit runs where a hammer and bolster would make too much mess and take all day.
- Plumbers reach for them when they need controlled channels for small-bore pipework in block or brick without blowing out half the wall face.
- Refurb and maintenance teams rely on them for occupied properties because cleaner, straighter cuts mean less dust spread and less making good afterwards.
- Builders and general fit-out crews keep one handy for mixed first-fix work, especially where speed matters and the client does not want the place wrecked in the process.
The Basics: Understanding Wall Chasers
A wall chaser cuts two parallel slots into the wall, then you knock out the middle. That gives you a controlled channel for cables or pipe without smashing the whole area to bits.
1. Twin Blade Cutting
The machine runs two diamond blades side by side to cut neat parallel lines. The gap between them sets the chase width, which is why spacer setup matters if you need room for conduit or pipe.
2. Adjustable Depth
Depth adjustment lets you cut only as far as the job needs. That means less strain on the motor, less mess to fill and less chance of going too deep into the wall than necessary.
3. Extraction Keeps It Usable
Without extraction, the dust cloud gets in the way fast and the room becomes a tip. Connect to Metabo Dust Extractors & Vacuums and the cut line stays clearer, the motor vents stay cleaner and the site is easier to hand back.
Wall Chaser Accessories That Save Time on Site
The right extras stop hold-ups, keep cuts cleaner and make the machine far more useful day to day.
1. Diamond Blades
Keep a spare set in the van. Worn blades slow the cut, heat the machine up and leave you leaning on it harder than you should. Good blades are cheaper than losing an hour fighting hard brick.
2. Dust Extraction Hose and Vac Connection
Do not bodge this bit. A proper hose connection keeps the dust where it belongs and stops you choking the room out halfway through the first chase.
3. Spacers and Blade Fitting Parts
These are what let you set the chase width properly. Lose them and you are stuck with the wrong slot size or off back to the van trying to find parts you should have kept together.
4. Carry Cases and Storage
A wall chaser thrown loose in the van soon gets battered. Proper storage keeps the machine, blades and fittings together so you are not turning up on site missing the bits that make it usable. Have a look at Metabo Tool Storage.
Choose the Right Metabo Wall Chaser for the Job
Pick by wall type, chase size and how much cutting you are doing in a day.
| Your Job | Category or Type | Key Features |
|---|---|---|
| Single socket drops and light domestic chasing | Compact wall chaser | Lower weight, easier vertical control, enough depth for standard cable runs |
| Full rewires in block and plaster | Mid-range wall chaser | Consistent depth adjustment, solid extraction port, good balance for repeated cuts |
| Conduit runs and wider channels | High capacity wall chaser | Greater width adjustment, deeper cut range, stronger performance in denser masonry |
| Occupied refurbs and indoor work | Wall chaser with dust extraction setup | Reliable vacuum connection, cleaner visibility, less airborne dust and less clean-up |
| Hard brick and tougher masonry | Wall chaser with premium blades | Better cutting speed, less blade glazing, reduced strain on the machine |
Common Buying and Usage Mistakes
- Buying on depth alone and ignoring width is a common one. You might cut deep enough, but if the slot is too narrow for conduit or pipe, you are straight back over it again wasting time.
- Running a wall chaser without proper extraction is asking for a filthy room and a poor cut line. Use a suitable vacuum from the start so you can see what you are doing and spend less time cleaning up.
- Using tired or wrong-spec blades slows everything down and makes the machine work harder. If the cut rate drops off or the blades start glazing, swap them before you cook the job.
- Forcing the machine through hard masonry instead of letting the blades do the work leads to wandering cuts and extra wear. Keep a steady pace and make sure the setup matches the wall material.
- Not checking what is already in the wall is a serious mistake. Scan first and know your route, because finding live cables or pipe the hard way turns a simple chase into a repair job.
Wall Chaser vs Angle Grinder vs SDS Plus Chisel
Metabo Wall Chaser
Best when you need clean, repeatable channels for first fix. You get controlled depth, consistent width and a neater finish that is easier to fill. It is the right tool if chasing walls is a regular part of your work.
Angle Grinder
An angle grinder will cut lines in a pinch, but it is messier, less controlled and harder to keep consistent over longer runs. If you already use Metabo Angle Grinders for other cutting work, keep in mind they are not a proper substitute for repeated wall chasing.
SDS Plus Chisel
Fine for knocking out the middle once the lines are cut, or for rough breakout where finish does not matter. On its own, though, it is slower and far less tidy if you are trying to form straight channels from scratch.
Maintenance and Care
Clean the Guard and Ports
Brick and plaster dust gets everywhere. Empty the machine out after use, especially around the guard and extraction port, so airflow stays decent and adjustment parts do not seize up.
Check Blade Wear Regularly
Do not wait until the machine is struggling. Worn blades cut slower, run hotter and put extra load on the motor. Keep replacements with your Metabo Power Tool Accessories so you are not caught out.
Inspect Spacers and Flanges
These small parts matter more than people think. If they are damaged, dirty or missing, your blade setup can be off and the chase width will not be right.
Store It Dry and Protected
Do not leave it loose under wet gear in the van. Dry storage helps stop corrosion on fittings and keeps the body, cable and guard from getting knocked about between jobs.
Why Shop for Metabo Wall Chasers at ITS?
Whether you need a compact metabo wall chaser for domestic rewires or a larger unit for wider, deeper channels, we stock the proper range in one place. That includes the machines, extraction support and backup bits to keep you working. It is all in our own warehouse, in stock and ready for next day delivery.
Metabo Wall Chaser FAQs
Is a wall chaser worth it?
Yes, if you are regularly cutting channels for cables or pipe in brick, block or plaster. It is far quicker and cleaner than scoring with a grinder and smashing out by hand, and the finish is straighter, which saves time when you come to fix in and make good.
What is a wall chaser used for?
A wall chaser is used to cut two parallel slots into masonry so you can remove the middle and create a neat channel. On site that usually means cable drops, conduit runs, small pipe routes and other first-fix work where you want a controlled chase instead of a rough breakout.
What depth and width can a Metabo wall chaser cut?
That depends on the model, but Metabo wall chasers are designed with adjustable depth and blade spacing so you can set the chase to suit the job. Always check the machine spec before buying, especially if you are running conduit or need a wider channel rather than a basic cable slot.
Do you need dust extraction with a wall chaser?
Yes, realistically you do. You can use one without extraction, but indoors it becomes a dust storm in seconds and you lose sight of the cut line. A metabo wall chaser and hoover setup makes the job cleaner, safer and much easier to control.
What blades does a Metabo wall chaser take?
Metabo wall chasers use paired diamond blades sized to the machine, set with spacers to control the chase width. The exact blade diameter and bore depend on the model, so check the product details and keep the right replacements on hand rather than trying to make odd blades work.
Will a wall chaser handle hard brick as well as block?
Yes, but hard brick is where blade quality and feed rate matter. The machine will do the work if you let it cut at its own pace, but tired blades or too much pressure will slow you right down and heat everything up.
Metabo Wall Chasers
Metabo wall chaser tools cut clean, straight channels into brick, block and plaster for cable runs, conduit and pipework without the faff of chasing by hand.
If you're rewiring, adding sockets or running pipe in solid walls, a proper wall chaser Metabo setup saves hours and leaves a neater job for second fix. Paired with a metabo wall chaser and hoover, dust stays under control, cuts stay visible, and you're not sweeping half the room afterwards. If you need more specialist kit, check Metabo More Power Tools and get the right machine for the chase.
What Are Metabo Wall Chasers Used For?
- Chasing out straight cable runs in blockwork and plastered walls makes first fix quicker and tidier than trying to score and hack it out by hand.
- Cutting twin slots for conduit or small pipework in refurbs helps keep depth and width consistent, so you are not fighting uneven channels when it comes to fixing in.
- Working room to room on rewires, a metabo wall chaser and hoover setup keeps airborne dust down and lets you see the line properly while you cut.
- Opening neat channels for back box feeds and vertical drops saves time on snagging because the chase is cleaner, straighter and easier to fill after first fix.
Choosing the Right Metabo Wall Chaser
Sorting the right one is simple: match the machine to the wall, the chase size and how often you are doing the job.
1. Cut Depth and Width First
If you are only chasing for standard cable drops, you do not need the biggest machine in the range. If you are cutting for conduit or small pipework, make sure the wall chaser has the depth and spacer setup to give you enough width in one pass.
2. Dust Extraction Is Not Optional
If you are working indoors, buy the machine as part of a proper extraction setup, not on its own. A metabo wall chaser and hoover setup keeps the line visible, stops the room choking up and saves a load of clean-up at the end.
3. Think About the Wall Material
If most of your work is plaster over block, a standard unit will cover it. If you are regularly into harder brick or denser masonry, go for the model that is happier under load and pair it with decent blades, not the cheapest ones you can find.
4. Weight Matters on Repetitive Work
If you are doing one or two chases on a snagging job, nearly any suitable model will do. If you are on a full rewire cutting verticals all day, a well-balanced machine that is easier to control will save your shoulders and help you keep the cuts straight.
Who Uses These on Site?
- Sparkies use a metabo wall chaser for socket drops, horizontal cable routes and conduit runs where a hammer and bolster would make too much mess and take all day.
- Plumbers reach for them when they need controlled channels for small-bore pipework in block or brick without blowing out half the wall face.
- Refurb and maintenance teams rely on them for occupied properties because cleaner, straighter cuts mean less dust spread and less making good afterwards.
- Builders and general fit-out crews keep one handy for mixed first-fix work, especially where speed matters and the client does not want the place wrecked in the process.
The Basics: Understanding Wall Chasers
A wall chaser cuts two parallel slots into the wall, then you knock out the middle. That gives you a controlled channel for cables or pipe without smashing the whole area to bits.
1. Twin Blade Cutting
The machine runs two diamond blades side by side to cut neat parallel lines. The gap between them sets the chase width, which is why spacer setup matters if you need room for conduit or pipe.
2. Adjustable Depth
Depth adjustment lets you cut only as far as the job needs. That means less strain on the motor, less mess to fill and less chance of going too deep into the wall than necessary.
3. Extraction Keeps It Usable
Without extraction, the dust cloud gets in the way fast and the room becomes a tip. Connect to Metabo Dust Extractors & Vacuums and the cut line stays clearer, the motor vents stay cleaner and the site is easier to hand back.
Wall Chaser Accessories That Save Time on Site
The right extras stop hold-ups, keep cuts cleaner and make the machine far more useful day to day.
1. Diamond Blades
Keep a spare set in the van. Worn blades slow the cut, heat the machine up and leave you leaning on it harder than you should. Good blades are cheaper than losing an hour fighting hard brick.
2. Dust Extraction Hose and Vac Connection
Do not bodge this bit. A proper hose connection keeps the dust where it belongs and stops you choking the room out halfway through the first chase.
3. Spacers and Blade Fitting Parts
These are what let you set the chase width properly. Lose them and you are stuck with the wrong slot size or off back to the van trying to find parts you should have kept together.
4. Carry Cases and Storage
A wall chaser thrown loose in the van soon gets battered. Proper storage keeps the machine, blades and fittings together so you are not turning up on site missing the bits that make it usable. Have a look at Metabo Tool Storage.
Choose the Right Metabo Wall Chaser for the Job
Pick by wall type, chase size and how much cutting you are doing in a day.
| Your Job | Category or Type | Key Features |
|---|---|---|
| Single socket drops and light domestic chasing | Compact wall chaser | Lower weight, easier vertical control, enough depth for standard cable runs |
| Full rewires in block and plaster | Mid-range wall chaser | Consistent depth adjustment, solid extraction port, good balance for repeated cuts |
| Conduit runs and wider channels | High capacity wall chaser | Greater width adjustment, deeper cut range, stronger performance in denser masonry |
| Occupied refurbs and indoor work | Wall chaser with dust extraction setup | Reliable vacuum connection, cleaner visibility, less airborne dust and less clean-up |
| Hard brick and tougher masonry | Wall chaser with premium blades | Better cutting speed, less blade glazing, reduced strain on the machine |
Common Buying and Usage Mistakes
- Buying on depth alone and ignoring width is a common one. You might cut deep enough, but if the slot is too narrow for conduit or pipe, you are straight back over it again wasting time.
- Running a wall chaser without proper extraction is asking for a filthy room and a poor cut line. Use a suitable vacuum from the start so you can see what you are doing and spend less time cleaning up.
- Using tired or wrong-spec blades slows everything down and makes the machine work harder. If the cut rate drops off or the blades start glazing, swap them before you cook the job.
- Forcing the machine through hard masonry instead of letting the blades do the work leads to wandering cuts and extra wear. Keep a steady pace and make sure the setup matches the wall material.
- Not checking what is already in the wall is a serious mistake. Scan first and know your route, because finding live cables or pipe the hard way turns a simple chase into a repair job.
Wall Chaser vs Angle Grinder vs SDS Plus Chisel
Metabo Wall Chaser
Best when you need clean, repeatable channels for first fix. You get controlled depth, consistent width and a neater finish that is easier to fill. It is the right tool if chasing walls is a regular part of your work.
Angle Grinder
An angle grinder will cut lines in a pinch, but it is messier, less controlled and harder to keep consistent over longer runs. If you already use Metabo Angle Grinders for other cutting work, keep in mind they are not a proper substitute for repeated wall chasing.
SDS Plus Chisel
Fine for knocking out the middle once the lines are cut, or for rough breakout where finish does not matter. On its own, though, it is slower and far less tidy if you are trying to form straight channels from scratch.
Maintenance and Care
Clean the Guard and Ports
Brick and plaster dust gets everywhere. Empty the machine out after use, especially around the guard and extraction port, so airflow stays decent and adjustment parts do not seize up.
Check Blade Wear Regularly
Do not wait until the machine is struggling. Worn blades cut slower, run hotter and put extra load on the motor. Keep replacements with your Metabo Power Tool Accessories so you are not caught out.
Inspect Spacers and Flanges
These small parts matter more than people think. If they are damaged, dirty or missing, your blade setup can be off and the chase width will not be right.
Store It Dry and Protected
Do not leave it loose under wet gear in the van. Dry storage helps stop corrosion on fittings and keeps the body, cable and guard from getting knocked about between jobs.
Why Shop for Metabo Wall Chasers at ITS?
Whether you need a compact metabo wall chaser for domestic rewires or a larger unit for wider, deeper channels, we stock the proper range in one place. That includes the machines, extraction support and backup bits to keep you working. It is all in our own warehouse, in stock and ready for next day delivery.
Metabo Wall Chaser FAQs
Is a wall chaser worth it?
Yes, if you are regularly cutting channels for cables or pipe in brick, block or plaster. It is far quicker and cleaner than scoring with a grinder and smashing out by hand, and the finish is straighter, which saves time when you come to fix in and make good.
What is a wall chaser used for?
A wall chaser is used to cut two parallel slots into masonry so you can remove the middle and create a neat channel. On site that usually means cable drops, conduit runs, small pipe routes and other first-fix work where you want a controlled chase instead of a rough breakout.
What depth and width can a Metabo wall chaser cut?
That depends on the model, but Metabo wall chasers are designed with adjustable depth and blade spacing so you can set the chase to suit the job. Always check the machine spec before buying, especially if you are running conduit or need a wider channel rather than a basic cable slot.
Do you need dust extraction with a wall chaser?
Yes, realistically you do. You can use one without extraction, but indoors it becomes a dust storm in seconds and you lose sight of the cut line. A metabo wall chaser and hoover setup makes the job cleaner, safer and much easier to control.
What blades does a Metabo wall chaser take?
Metabo wall chasers use paired diamond blades sized to the machine, set with spacers to control the chase width. The exact blade diameter and bore depend on the model, so check the product details and keep the right replacements on hand rather than trying to make odd blades work.
Will a wall chaser handle hard brick as well as block?
Yes, but hard brick is where blade quality and feed rate matter. The machine will do the work if you let it cut at its own pace, but tired blades or too much pressure will slow you right down and heat everything up.
Our Stores
| Opening times |
|---|
