METABO IMPACT DRIVERS
Metabo impact driver kit is built for driving long fixings fast without wrecking your wrist or stalling out in timber, sheet, or stubborn site fixings.
When you're firing in coach screws, decking bolts or frame fixings all day, a metabo impact driver makes more sense than leaning on a combi. The hammering action keeps turning under load, and Metabo's 18V brushless options are the ones lads reach for when speed matters and the screws just keep coming. If you also need drilling, look at Metabo Combi Drills or Metabo Drill Drivers, then pick the right impact driver for the fixing work.
What Are Metabo Impact Drivers Used For?
- Driving long timber screws into stud, joist and carcassing work is where a metabo 18v impact driver earns its keep, especially when a standard drill starts fighting back.
- Fixing ledger boards, decking frames and exterior timber runs goes quicker with a metabo cordless impact driver because it keeps delivering torque without constantly twisting your arm.
- Running hundreds of self tappers into sheet metal, trunking brackets and light steel sections is easier with a 1 4 impact driver that holds a bit properly and swaps over fast.
- Assembling site cabins, shutters, kitchens and first fix timber work is a proper fit for a metabo impact screwdriver when you need compact kit that still gets stubborn fixings seated cleanly.
- Undoing seized or overdriven screws during refurbs and maintenance saves time on snagging jobs, provided you match the bit properly and let the impacting do the work.
Choosing the Right Metabo Impact Driver
Sorting the right one is simple: match it to the fixing work, not the badge on the side.
1. Body Only or Full Kit
If you are already running Metabo gear, a metabo impact driver body only is the sensible buy. If this is your first step into the platform, go for a metabo impact driver set so you are not stuck waiting on one battery halfway through the day.
2. Brushless for Daily Graft
If the driver is going to earn its keep five days a week, buy the metabo brushless impact driver. It runs cooler, wastes less power and stands up better to constant site use than cheaper, lighter duty options.
3. Compact Jobs or Repetitive Heavy Fixings
If you are mostly fitting kitchens, doing second fix or working in tight corners, keep it compact. If you are driving long structural screws, repeated coach screws or exterior fixings, choose the higher torque metabo impact driver 18v models so the tool is not constantly on its limit.
4. Bit Holder and Fixing Type
These are built around 1 4 hex bits, so buy around the fixings you actually use. For screwdriving and fast bit swaps, an impact driver is right. If you are dealing with sockets and larger nuts and bolts, look at Metabo Impact Wrenches instead.
Who Uses These on Site?
- Chippies swear by a metabo impact driver for first fix, decking and timber frame jobs where long screws need driving all day without your wrist taking a beating.
- Kitchen fitters and joiners keep one close for cabinet fixing, carcass assembly and running screws into awkward corners where a bulky drill is a nuisance.
- Sparkies and M and E fitters use a metabo cordless impact driver for tray, bracket and containment work, especially when driving self tappers overhead or in plant rooms.
- Roofers and general builders reach for these when fixing battens, structural timber connectors and exterior screws where steady torque and compact size matter more than chuck capacity.
- Maintenance teams like a metabo impact driver body only if they are already on the battery platform and want a grab and go driver that lives in the van for breakdown jobs.
The Basics: Understanding Metabo Impact Drivers
An impact driver does not just spin like a drill. Once the screw starts fighting back, the tool adds rotational hammer blows to keep the bit turning and the fixing moving. That is why they feel easier on the wrist and cope better with stubborn fixings.
1. 1 4 Hex Drive
A metabo 1 4 impact driver takes standard 1 4 inch hex screwdriver bits, so swaps are quick and the nose stays short. It is ideal when you are moving between PZ, TX and hex head fixings all day.
2. Impact Action Under Load
When resistance builds, the tool starts impacting internally instead of just trying to twist harder like a drill. On site that means fewer cam outs, less strain on your hand and a better chance of sinking long screws cleanly.
3. Driver Not Wrench
Use an impact driver for screws, self tappers and smaller hex fixings with the right adaptor. If the job is proper bolting work, wheel fixings or large anchors, an impact wrench is the right tool and saves wrecking bits and adaptors.
Metabo Impact Driver Accessories That Save Time
The right extras stop hold ups on site and keep your driver useful from first fix to snagging.
1. Impact Rated Screwdriver Bits
Do not feed a hard working driver with cheap bits. Proper Metabo Screwdriver Bits take the hammering better, fit cleaner in the screw head and save you rounding fixings halfway through the job.
2. Spare Batteries and Charger
A spare pack is a no brainer if the tool is in constant use. Keep Metabo Batteries & Chargers in rotation so you are not stood waiting when the last few structural screws still need driving in.
3. Bit Holders and Socket Adaptors
A decent locking bit holder or hex to socket adaptor saves constant bit swapping and lets you move from timber screws to hex head fixings without walking back to the van.
Choose the Right Metabo Impact Driver for the Job
Use this quick guide to sort the right type for the work in front of you.
| Your Job | Category or Type | Key Features |
|---|---|---|
| Kitchen fitting, second fix and tight cupboards | Compact metabo cordless impact driver | Short nose, lower weight, fast bit changes, easier overhead use |
| First fix timber, stud walls and repeated long screws | Metabo 18v impact driver | Higher torque, better runtime, less kickback through the wrist |
| Daily site use across mixed fixing jobs | Metabo brushless impact driver | Better efficiency, cooler running, stronger long term durability |
| Already on the Metabo battery platform | Metabo impact driver body only | Lower upfront cost, uses your existing batteries and charger |
| Starting fresh or equipping a new van | Metabo impact driver set | Tool, batteries, charger and case sorted in one hit |
Common Buying and Usage Mistakes
- Buying an impact driver when you actually need a drill is a common one. These are brilliant for driving fixings, but if most of your day is drilling holes in wood, metal or masonry, pair it with the right drill rather than forcing one tool to do both jobs badly.
- Using cheap non impact bits soon ends in rounded screw heads and snapped tips. Fit impact rated bits and replace worn ones early or you will lose more time fighting fixings than the driver ever saves you.
- Choosing body only with no spare batteries sounds cheaper until the tool dies mid task. If you are not already on Metabo packs, buy the kit and keep working instead of charging one battery at a time.
- Trying to do bolt work with socket adaptors when the job really wants a wrench just chews up adaptors and wastes time. For repeated nuts and bolts, step up to the proper impact wrench platform.
- Leaning on the tool like a drill causes cam out and damaged fixings. Let the impacting do the work, keep the bit square and use steady pressure rather than trying to force it through.
Impact Driver vs Drill Driver vs Impact Wrench
Metabo Impact Driver
Best for driving screws and fixings fast, especially longer timber screws, self tappers and repetitive assembly work. More compact than a drill and easier on the wrist under load, but it is not your first pick for clean, accurate drilling.
Metabo Drill Driver
Better for general drilling and controlled screwdriving where finesse matters more than outright fastening speed. If you are pilot drilling, fitting hardware or working with a wide range of drill bits, this is the steadier all rounder.
Metabo Combi Drill
The combi is the van staple when you need drilling in wood and metal plus occasional hammer drilling into masonry. It is more versatile than an impact driver, but less efficient for sinking long screws all day.
Metabo Impact Wrench
This is for sockets, nuts and bolts, not routine screwdriving. If the work is anchor bolts, steel fixings or automotive style fastening, the wrench is the right bit of kit and the impact driver is the wrong one.
Maintenance and Care
Keep the Collet Clean
Dust, swarf and site grit collect around the bit holder fast. Blow it out regularly and wipe the nose down so bits lock in properly and do not start sticking during swaps.
Check Bits Before the Tool
A lot of so called driver problems are just worn bits. If it starts slipping, camming out or chewing screw heads, inspect the bit first and bin tired ones before they damage fixings.
Look After the Batteries
Do not leave packs flat in the van for weeks or roasting on the dashboard. Charge them properly, rotate them through the week and store them dry if you want decent runtime and service life.
Wipe Down After Dirty Work
After decking, roofing or metal fixing jobs, give the tool a proper wipe down. Fine dust and damp grime around vents and switches only shorten the life of a tool that is supposed to work hard.
Repair or Replace Sensibly
If the collet stops holding bits securely or the tool develops rough noises under load, get it checked before it fails completely. Do not keep nursing a worn driver on critical site work when downtime costs more than sorting it.
Why Shop for Metabo Impact Drivers at ITS?
Whether you need a compact metabo impact screwdriver for lighter fitting work, a metabo 18v impact driver for daily first fix, or a metabo impact driver body only to match the batteries you already own, we stock the full range. Kits, bare units, batteries, chargers and the bits to run them are all in our own warehouse, in stock and ready for next day delivery.
Metabo Impact Driver FAQs
What is an impact driver used for?
It is used for driving screws, coach screws, self tappers and other fixings that would make a standard drill struggle. Think first fix timber, decking, framing brackets, sheet metal screws and repetitive fixing jobs where you want speed without the tool wrenching your arm.
Are Metabo impact drivers brushless?
Many Metabo impact drivers are brushless, yes, but not every model in the wider market always is, so check the listing. For regular site use, brushless is the one to go for because it runs more efficiently, stands up better to repeated load and usually gives better runtime from the same battery.
What bits fit a Metabo impact driver?
A Metabo impact driver takes standard 1 4 inch hex shank screwdriver bits. Use impact rated bits where you can, because ordinary bits can twist or snap once the tool starts hammering under load.
Can you use an impact driver to drill?
Yes, within reason. You can use hex shank drill bits for small holes in timber or metal, but it is not the cleanest or most accurate way to drill all day. If drilling is a big part of the job, use a drill driver or combi and keep the impact driver for fastener work.
What is the difference between an impact driver and an impact wrench?
An impact driver uses a 1 4 inch hex holder and is mainly for screws and smaller fixings. An impact wrench uses a square drive for sockets and is built for nuts, bolts and heavier fastening. If you are mostly driving screws, buy the driver. If you are tightening anchors or bolts all day, buy the wrench.
Metabo Impact Drivers
Metabo impact driver kit is built for driving long fixings fast without wrecking your wrist or stalling out in timber, sheet, or stubborn site fixings.
When you're firing in coach screws, decking bolts or frame fixings all day, a metabo impact driver makes more sense than leaning on a combi. The hammering action keeps turning under load, and Metabo's 18V brushless options are the ones lads reach for when speed matters and the screws just keep coming. If you also need drilling, look at Metabo Combi Drills or Metabo Drill Drivers, then pick the right impact driver for the fixing work.
What Are Metabo Impact Drivers Used For?
- Driving long timber screws into stud, joist and carcassing work is where a metabo 18v impact driver earns its keep, especially when a standard drill starts fighting back.
- Fixing ledger boards, decking frames and exterior timber runs goes quicker with a metabo cordless impact driver because it keeps delivering torque without constantly twisting your arm.
- Running hundreds of self tappers into sheet metal, trunking brackets and light steel sections is easier with a 1 4 impact driver that holds a bit properly and swaps over fast.
- Assembling site cabins, shutters, kitchens and first fix timber work is a proper fit for a metabo impact screwdriver when you need compact kit that still gets stubborn fixings seated cleanly.
- Undoing seized or overdriven screws during refurbs and maintenance saves time on snagging jobs, provided you match the bit properly and let the impacting do the work.
Choosing the Right Metabo Impact Driver
Sorting the right one is simple: match it to the fixing work, not the badge on the side.
1. Body Only or Full Kit
If you are already running Metabo gear, a metabo impact driver body only is the sensible buy. If this is your first step into the platform, go for a metabo impact driver set so you are not stuck waiting on one battery halfway through the day.
2. Brushless for Daily Graft
If the driver is going to earn its keep five days a week, buy the metabo brushless impact driver. It runs cooler, wastes less power and stands up better to constant site use than cheaper, lighter duty options.
3. Compact Jobs or Repetitive Heavy Fixings
If you are mostly fitting kitchens, doing second fix or working in tight corners, keep it compact. If you are driving long structural screws, repeated coach screws or exterior fixings, choose the higher torque metabo impact driver 18v models so the tool is not constantly on its limit.
4. Bit Holder and Fixing Type
These are built around 1 4 hex bits, so buy around the fixings you actually use. For screwdriving and fast bit swaps, an impact driver is right. If you are dealing with sockets and larger nuts and bolts, look at Metabo Impact Wrenches instead.
Who Uses These on Site?
- Chippies swear by a metabo impact driver for first fix, decking and timber frame jobs where long screws need driving all day without your wrist taking a beating.
- Kitchen fitters and joiners keep one close for cabinet fixing, carcass assembly and running screws into awkward corners where a bulky drill is a nuisance.
- Sparkies and M and E fitters use a metabo cordless impact driver for tray, bracket and containment work, especially when driving self tappers overhead or in plant rooms.
- Roofers and general builders reach for these when fixing battens, structural timber connectors and exterior screws where steady torque and compact size matter more than chuck capacity.
- Maintenance teams like a metabo impact driver body only if they are already on the battery platform and want a grab and go driver that lives in the van for breakdown jobs.
The Basics: Understanding Metabo Impact Drivers
An impact driver does not just spin like a drill. Once the screw starts fighting back, the tool adds rotational hammer blows to keep the bit turning and the fixing moving. That is why they feel easier on the wrist and cope better with stubborn fixings.
1. 1 4 Hex Drive
A metabo 1 4 impact driver takes standard 1 4 inch hex screwdriver bits, so swaps are quick and the nose stays short. It is ideal when you are moving between PZ, TX and hex head fixings all day.
2. Impact Action Under Load
When resistance builds, the tool starts impacting internally instead of just trying to twist harder like a drill. On site that means fewer cam outs, less strain on your hand and a better chance of sinking long screws cleanly.
3. Driver Not Wrench
Use an impact driver for screws, self tappers and smaller hex fixings with the right adaptor. If the job is proper bolting work, wheel fixings or large anchors, an impact wrench is the right tool and saves wrecking bits and adaptors.
Metabo Impact Driver Accessories That Save Time
The right extras stop hold ups on site and keep your driver useful from first fix to snagging.
1. Impact Rated Screwdriver Bits
Do not feed a hard working driver with cheap bits. Proper Metabo Screwdriver Bits take the hammering better, fit cleaner in the screw head and save you rounding fixings halfway through the job.
2. Spare Batteries and Charger
A spare pack is a no brainer if the tool is in constant use. Keep Metabo Batteries & Chargers in rotation so you are not stood waiting when the last few structural screws still need driving in.
3. Bit Holders and Socket Adaptors
A decent locking bit holder or hex to socket adaptor saves constant bit swapping and lets you move from timber screws to hex head fixings without walking back to the van.
Choose the Right Metabo Impact Driver for the Job
Use this quick guide to sort the right type for the work in front of you.
| Your Job | Category or Type | Key Features |
|---|---|---|
| Kitchen fitting, second fix and tight cupboards | Compact metabo cordless impact driver | Short nose, lower weight, fast bit changes, easier overhead use |
| First fix timber, stud walls and repeated long screws | Metabo 18v impact driver | Higher torque, better runtime, less kickback through the wrist |
| Daily site use across mixed fixing jobs | Metabo brushless impact driver | Better efficiency, cooler running, stronger long term durability |
| Already on the Metabo battery platform | Metabo impact driver body only | Lower upfront cost, uses your existing batteries and charger |
| Starting fresh or equipping a new van | Metabo impact driver set | Tool, batteries, charger and case sorted in one hit |
Common Buying and Usage Mistakes
- Buying an impact driver when you actually need a drill is a common one. These are brilliant for driving fixings, but if most of your day is drilling holes in wood, metal or masonry, pair it with the right drill rather than forcing one tool to do both jobs badly.
- Using cheap non impact bits soon ends in rounded screw heads and snapped tips. Fit impact rated bits and replace worn ones early or you will lose more time fighting fixings than the driver ever saves you.
- Choosing body only with no spare batteries sounds cheaper until the tool dies mid task. If you are not already on Metabo packs, buy the kit and keep working instead of charging one battery at a time.
- Trying to do bolt work with socket adaptors when the job really wants a wrench just chews up adaptors and wastes time. For repeated nuts and bolts, step up to the proper impact wrench platform.
- Leaning on the tool like a drill causes cam out and damaged fixings. Let the impacting do the work, keep the bit square and use steady pressure rather than trying to force it through.
Impact Driver vs Drill Driver vs Impact Wrench
Metabo Impact Driver
Best for driving screws and fixings fast, especially longer timber screws, self tappers and repetitive assembly work. More compact than a drill and easier on the wrist under load, but it is not your first pick for clean, accurate drilling.
Metabo Drill Driver
Better for general drilling and controlled screwdriving where finesse matters more than outright fastening speed. If you are pilot drilling, fitting hardware or working with a wide range of drill bits, this is the steadier all rounder.
Metabo Combi Drill
The combi is the van staple when you need drilling in wood and metal plus occasional hammer drilling into masonry. It is more versatile than an impact driver, but less efficient for sinking long screws all day.
Metabo Impact Wrench
This is for sockets, nuts and bolts, not routine screwdriving. If the work is anchor bolts, steel fixings or automotive style fastening, the wrench is the right bit of kit and the impact driver is the wrong one.
Maintenance and Care
Keep the Collet Clean
Dust, swarf and site grit collect around the bit holder fast. Blow it out regularly and wipe the nose down so bits lock in properly and do not start sticking during swaps.
Check Bits Before the Tool
A lot of so called driver problems are just worn bits. If it starts slipping, camming out or chewing screw heads, inspect the bit first and bin tired ones before they damage fixings.
Look After the Batteries
Do not leave packs flat in the van for weeks or roasting on the dashboard. Charge them properly, rotate them through the week and store them dry if you want decent runtime and service life.
Wipe Down After Dirty Work
After decking, roofing or metal fixing jobs, give the tool a proper wipe down. Fine dust and damp grime around vents and switches only shorten the life of a tool that is supposed to work hard.
Repair or Replace Sensibly
If the collet stops holding bits securely or the tool develops rough noises under load, get it checked before it fails completely. Do not keep nursing a worn driver on critical site work when downtime costs more than sorting it.
Why Shop for Metabo Impact Drivers at ITS?
Whether you need a compact metabo impact screwdriver for lighter fitting work, a metabo 18v impact driver for daily first fix, or a metabo impact driver body only to match the batteries you already own, we stock the full range. Kits, bare units, batteries, chargers and the bits to run them are all in our own warehouse, in stock and ready for next day delivery.
Metabo Impact Driver FAQs
What is an impact driver used for?
It is used for driving screws, coach screws, self tappers and other fixings that would make a standard drill struggle. Think first fix timber, decking, framing brackets, sheet metal screws and repetitive fixing jobs where you want speed without the tool wrenching your arm.
Are Metabo impact drivers brushless?
Many Metabo impact drivers are brushless, yes, but not every model in the wider market always is, so check the listing. For regular site use, brushless is the one to go for because it runs more efficiently, stands up better to repeated load and usually gives better runtime from the same battery.
What bits fit a Metabo impact driver?
A Metabo impact driver takes standard 1 4 inch hex shank screwdriver bits. Use impact rated bits where you can, because ordinary bits can twist or snap once the tool starts hammering under load.
Can you use an impact driver to drill?
Yes, within reason. You can use hex shank drill bits for small holes in timber or metal, but it is not the cleanest or most accurate way to drill all day. If drilling is a big part of the job, use a drill driver or combi and keep the impact driver for fastener work.
What is the difference between an impact driver and an impact wrench?
An impact driver uses a 1 4 inch hex holder and is mainly for screws and smaller fixings. An impact wrench uses a square drive for sockets and is built for nuts, bolts and heavier fastening. If you are mostly driving screws, buy the driver. If you are tightening anchors or bolts all day, buy the wrench.
Our Stores
| Opening times |
|---|
