Makita 40V XGT Pumps & Sprays
Makita 40V Xgt Pumps Sprays sort quick water transfer and controlled spraying without dragging leads or petrol about.
When you're shifting water out a trench, draining a tank, or spraying fence panels and sheds all day, you need kit that runs clean and doesn't quit. Makita 40V XGT pumps and sprayers give you cordless flow and consistent pressure on the same XGT batteries as your main tools. Pick the right capacity and hose set-up, and get the job done without constant refills or blockages.
What Jobs Are Makita 40V Xgt Pumps Sprays Best At?
- Draining standing water from trenches, meter pits, and flooded basements where you cannot get safe mains power down to the work area.
- Transferring water from butts, tanks, and IBCs for site wash-downs and dust suppression without running long hoses back to a tap.
- Spraying timber treatments, fence paint, and shed coatings evenly when you have metres to cover and do not want roller marks or constant brush work.
- Applying weedkiller and general grounds-care sprays around plots and site perimeters with controlled output so you are not wasting chemical or soaking the path.
- Keeping maintenance jobs moving on remote work where a cordless pump gets you out of trouble fast, especially on call-outs and property management.
Choosing the Right Makita 40V Xgt Pumps Sprays
Sorting the right one is simple: match the flow and tank size to the day's work, not the one-off job.
1. Pump flow rate and head height
If you are just shifting water across flat ground into a drain, you can prioritise flow rate. If you need to lift water up and out of a basement or over a bank, pay attention to head height, because a pump that cannot lift will just sit there churning.
2. Sprayer tank size and carry style
If you are doing a few panels or spot treatments, a smaller tank keeps weight down and is quicker to grab. If you are spraying full runs of fencing or big areas, go bigger so you are not stopping every five minutes to mix and refill.
3. Chemical compatibility and nozzle control
If you are using treatments or weedkiller, make sure the sprayer is intended for that sort of use and keep a dedicated set-up for chemicals. For paint and timber treatments, nozzle choice and adjustable output matter more than raw pressure, because that is what controls overspray and finish.
4. Battery plan on XGT
If you are already on Makita 40V XGT, body-only makes sense and keeps cost down. If you are starting from scratch or it is for a separate crew, a kit with batteries and charger stops the usual site argument about who nicked the last charged pack.
Who Uses Makita 40V Xgt Pumps Sprays?
- Groundworkers and civils gangs who need to keep excavations and chambers workable after rain, without waiting around for hired kit.
- Landscapers and maintenance teams using sprayers for treatments and tidy-ups, and pumps for moving water on plots and gardens.
- Facilities and site maintenance engineers who want a cordless pump in the van for quick drain-downs, leaks, and nuisance flooding.
- Decorators and joiners doing fencing and exterior timber work who want a sprayer that lays on consistent coverage without killing your wrist by lunchtime.
How Makita 40V Xgt Pumps Sprays Works for You
These are cordless job movers: pumps shift water where gravity will not, and sprayers lay down an even coat or treatment without constant hand pumping. Here's what matters on site.
1. Pumps are about lift and flow, not just power
A pump can have decent flow but still struggle if you are lifting water up a long run or out of a deep hole. For real site use, think about where the water is going, the hose length, and the height you need to clear.
2. Sprayers are about consistent output
A decent cordless sprayer keeps pressure steady so your coverage stays even across panels and edges. That saves material, cuts runs and dry patches, and keeps the finish looking the same from the first fill to the last.
3. Cordless means fewer site compromises
No leads through puddles, no hunting for a socket, and no petrol fumes in enclosed areas. On real jobs, that is what keeps the work moving when access is awkward or the site is still rough.
Shop Makita 40V Xgt Pumps Sprays at ITS
Whether you need a cordless pump for quick water transfer or a sprayer for treatments and coatings, we stock the Makita 40V Xgt Pumps Sprays range in the key types and set-ups. It's all held in our own warehouse, in stock and ready for next day delivery so you can order today and get it on site fast.
Makita 40V Xgt Pumps Sprays FAQs
What are the features of Makita 40V Xgt Pumps Sprays?
They are built around the Makita 40V XGT battery platform, so you get cordless pumping or spraying without a lead. Features vary by model, but the practical wins are portable set-up, consistent output, and site-friendly use where power and water do not mix.
Are Makita 40V Xgt Pumps Sprays available with batteries and charger?
Yes, you will typically see both body-only and kit options depending on the model. If you are already running Makita XGT, body-only is the sensible buy; if it is for a new starter or separate crew, a kit avoids downtime on day one.
Is there a warranty on Makita 40V Xgt Pumps Sprays?
Yes, Makita tools come with a manufacturer warranty, and terms can depend on registration and the specific product. Keep your proof of purchase and register if required, because that is what makes warranty claims straightforward if anything goes wrong.
Are Makita 40V Xgt Pumps Sprays suitable for professional tradesmen?
Yes, they are aimed at trade and site use where you need reliable cordless kit for water transfer, wash-down support, treatments, and maintenance work. The key is choosing the right pump lift and flow, or the right sprayer capacity and nozzle control, for the jobs you actually do.
Do you offer next day delivery on Makita 40V Xgt Pumps Sprays?
Yes, as long as it is in stock and ordered in time, next day delivery is available so you can get the kit on site quickly. Always check the product page for the live stock position if you are buying for an urgent job.
