Makita 40V XGT Hedge Trimmers
Makita 40V headge trimmer kit is for fast, clean hedge cutting on bigger gardens and site perimeters, without petrol faff or trailing leads.
When you're shaping long runs of laurel or knocking back overgrowth round plots, you need a trimmer that won't bog down halfway through. Makita 40V XGT hedge trimmers give you proper cordless power, solid run time, and the balance to work all day without fighting the tool. Pick the blade length to suit the hedge height and access, then get cutting.
What Are Makita 40V Headge Trimmer Used For?
- Cutting back thick, established hedges on property maintenance jobs where a small domestic trimmer just chatters and leaves a mess.
- Trimming long boundary lines and site perimeters quickly, so you can keep access routes, walkways, and visibility tidy and safe.
- Shaping and finishing hedges for handover standards, giving a clean edge without dragging out petrol kit or running extension leads.
- Working around schools, housing, and commercial sites where lower noise and zero fumes make the job easier to manage.
Choosing the Right Makita 40V Headge Trimmer
Match the trimmer to the hedge, not the other way round, because blade length and reach decide how fast you get through the day.
1. Blade Length and Cut Capacity
If you are doing long, straight runs, a longer blade covers more hedge per pass and saves time. If you are working tight corners, smaller gardens, or detailed shaping, a shorter blade is easier to control and less likely to snag.
2. Standard vs Long Reach
If you are constantly up steps or trying to top tall hedges, go long reach so you can work from the ground and keep your footing safe. If most of your work is waist to shoulder height, a standard hedge trimmer is lighter in the hands and quicker to manoeuvre.
3. Batteries and Run Time
If you are on maintenance rounds, do not turn up with one battery and hope for the best. Two packs and a charger keeps you cutting while the other battery is cooling and charging, especially when you are into thicker growth.
Makita 40V Headge Trimmer FAQs
Is a Makita 40V XGT hedge trimmer actually strong enough for thick hedges, or is it just for light trimming?
It is built for proper maintenance work, not just a quick tidy-up. The key is matching the model and its tooth gap to the hedge you are cutting, because forcing a fine-trim blade into thick stems is what causes bogging and rough cuts.
How many batteries do I need to get through a day without stopping?
For steady site work, plan on two batteries as a minimum so one can be on charge while you cut. If you are doing long boundary runs or hitting heavy growth all day, having an extra pack takes the pressure off and keeps the job moving.
Can I use my Makita 18V LXT batteries on these Makita 40V XGT hedge trimmers?
No. XGT is a different battery platform with different packs and chargers, so you need Makita 40V XGT batteries to run these trimmers.
What blade length should I choose for real-world jobs?
Longer blades are quicker on long, straight hedges because you cover more per pass, but they are harder to control in tight spaces. If you are working around gates, corners, or doing detailed shaping, a shorter blade is less hassle and less likely to catch.
Do cordless hedge trimmers cope with wet hedges and damp mornings?
They will handle normal damp conditions, but do not treat any cordless tool like it is waterproof. Keep the battery and vents clear of heavy rain, wipe the tool down after use, and clean sap off the blades so it does not gum up and drag.
Who Uses These on Site?
- Grounds maintenance teams and landscapers who need reliable cordless cutting for daily hedge rounds and seasonal knock-backs.
- Facilities and estates teams keeping paths, car parks, and boundaries clear without storing petrol or dealing with pull starts.
- Site maintenance and handover crews tidying plot edges and communal areas, where a clean finish matters and time is tight.
How Makita 40V XGT Hedge Trimmers Work for You
A hedge trimmer is only as good as how it holds speed under load and how clean it cuts. With 40V XGT, the aim is petrol-like cutting without the noise, fumes, or maintenance.
1. Reciprocating Blades (Clean Cut, Less Snagging)
The twin blades move back and forth to shear growth rather than tear it, which is what gives you a neater finish and less brown, ragged edges on the hedge line.
2. Power Delivery Under Load
When you hit thicker stems, the difference is whether the tool keeps its cutting speed or stalls and chews. A stronger platform helps you keep moving instead of constantly backing off and re-cutting the same section.
3. Cordless Practicalities on Real Jobs
No lead means you can work along boundaries, around parked cars, and through tight access without dragging cable through shrubs or risking a nicked extension.
Hedge Trimmer Accessories That Save Time on the Job
The right add-ons keep you cutting safely, reduce downtime, and stop you wrecking blades on hidden rubbish in the hedge.
1. Spare Makita 40V XGT Batteries
A second battery stops the job grinding to a halt halfway down a boundary line, especially when you are into thick growth and the tool is working hard all day.
2. Fast Charger
A quicker charger is what keeps a two-battery rotation realistic on busy maintenance days, so you are not standing around waiting for a pack to come back up.
3. Blade Cover or Scabbard
Protects the teeth in the van and on site, because one knock against paving or a gate post can blunt the blade and turn a clean cut into a chewed finish.
4. Blade Cleaner and Lubricant
A quick clean and lube stops sap building up, keeps the cut smooth, and helps the trimmer run cooler when you are hammering through resinous hedges.
Shop Makita 40V XGT Hedge Trimmers at ITS
Whether you need a compact trimmer for tight shaping or a longer blade for big boundary runs, we stock the full Makita 40V XGT hedge trimmer range and the key batteries and chargers to match. It is all held in our own warehouse, in stock and ready for next day delivery so you can get sorted for the next shift.
