Makita 40V XGT Impact Drivers
Makita 40V XGT impact drivers are for driving big fixings all day without the tool bogging down or cooking batteries on proper site work.
When you're sinking long structural screws, coach screws, or running fixings into wet timber and old joists, a Makita XGT impact driver gives you the extra shove and runtime you feel straight away. These are Makita 40V cordless impact drivers built for heavy driving, with brushless motors and proper control modes so you don't round heads or snap fixings. Pick your body-only or kit, match it to the batteries you've already got, and get a driver that earns its keep shift after shift.
What Jobs Are Makita 40V XGT Impact Drivers Best At?
- Driving long structural screws into joists, rafters, and studwork where a standard drill driver starts stalling and chewing heads.
- Fixing ledger boards, sleepers, and timber frames on refurbs and extensions when you need a Makita XGT high torque driver that keeps pulling without overheating.
- Running hundreds of fixings on first fix and fit-out, using speed control to avoid cam-out when you're working one-handed off steps or in tight corners.
- Bolting and bracket work with impact-rated hex adaptors and sockets, shifting stubborn fixings without twisting your wrist like a combi drill can.
- Site snagging and second fix where a Makita XGT brushless impact driver gives clean starts and consistent drive so you are not marking finished timber or stripping screw heads.
Choosing the Right Makita 40V XGT Impact Driver
Sorting the right one is simple: match the driver to the fixings you actually use, not the biggest number on a spec sheet.
1. Torque and fixing size
If you are mostly on 4mm to 6mm screws and general second fix, a standard Makita XGT impact driver is plenty and easier to control. If you are regularly driving long structural screws and coach screws, go for a Makita XGT professional impact driver with higher torque so it does not bog down halfway in.
2. Control modes and speed settings
If you do kitchen, joinery, or any finished work, prioritise models with multiple speeds and assist modes so you can start slow and avoid snapping heads or overdriving. If you are on first fix and repetitive driving, you will appreciate quicker ramp-up and consistent drive to keep production moving.
3. Battery choice for real runtime
If you are only grabbing it for short jobs, a smaller XGT battery keeps weight down. If it is your main site driver, run higher capacity packs so you are not swapping batteries every hour, especially when you are driving into wet timber or using big fixings.
4. Body-only vs kit
If you are already on Makita 40V XGT, body-only is the sensible buy and keeps your spend tight. If you are moving over from another platform, a kit with charger and batteries gets you working properly from day one, not limping along with one pack.
Makita 40V XGT Impact Driver FAQs
Is it worth upgrading to 40V Makita?
If your impact driver is a daily tool and you are regularly on long structural screws, big fixings, or hard materials, yes, XGT is worth it because it keeps driving where smaller platforms start to stall and heat up. If you only use an impact occasionally for light second fix, you will not see the same benefit and LXT may already cover you.
What is better, LXT or XGT?
Neither is "better" for everyone. LXT is the sensible choice if you already own loads of 18V Makita kit and your work is general fixing and drilling. XGT is built for higher demand tools and heavier driving, so it makes sense when you need more power, longer runtime, and a platform aimed at pro site workloads.
Will Makita XGT batteries fit my Makita LXT tools?
No. XGT and LXT are different battery platforms and they do not interchange. If you are moving to Makita 40V XGT impact drivers, budget for the right XGT batteries and charger, unless you are buying body-only to add to an existing XGT setup.
Do I need impact-rated bits, or will standard screwdriver bits do?
Use impact-rated bits. A Makita XGT professional impact driver hits in pulses, and standard bits can shatter or twist, especially on long screws and high torque work. Impact bits last longer, round fewer heads, and are safer when you are driving at speed.
Are Makita 40V cordless impact drivers good for bolt work as well as screws?
Yes, within reason. With impact-rated socket adaptors and nut setters they are handy for brackets and light to medium fixings, but they are not a replacement for a dedicated impact wrench on bigger bolts. If you are regularly on large nuts and high torque fastening, step up to an impact wrench.
Who Uses Makita XGT Impact Drivers?
- Chippies and timber framers driving structural screws all day, because the extra power and control saves time and snapped fixings.
- Roofers and first fix teams working off ladders and scaffold, because a Makita XGT site driver is compact in the hand but still shifts big fixings fast.
- Fitters and maintenance lads doing plant rooms, brackets, and fixings into awkward materials, because impact action bites without constantly slipping.
- Groundworkers and landscapers building decks, sleepers, and fencing, because a Makita 40V driving tool keeps going in wet timber and muddy conditions.
How Impact Drivers Work for You on Site
An impact driver is not just a drill with more power. It hits in short bursts to keep the bit turning under load, which is why it drives fixings faster with less wrist strain.
1. Impact action versus constant twist
Instead of stalling when the screw bites, the tool delivers rapid impacts that keep it moving. That is why a Makita 40V cordless impact driver is the one you reach for when the fixings get long or the timber is hard and wet.
2. Brushless control you can feel
A Makita XGT brushless impact driver manages power and speed more cleanly, so you get better battery use and less heat when you are driving fixings back-to-back on first fix.
3. Use the right bits
Impact-rated bits and holders matter because the tool is hammering the drivetrain. Use proper impact bits and you will round fewer heads, snap fewer tips, and spend less time fishing broken steel out of a screw.
Impact Driver Accessories That Save Time on Site
The driver is only half the story. The right add-ons stop snapped bits, rounded heads, and constant trips back to the van.
1. Impact-rated bit sets and torsion bits
Use impact-rated bits for Pozi, Torx, and hex fixings so they take the hammering without shattering. Torsion bits are worth it when you are driving structural screws all day, because they flex instead of snapping at the first hard bite.
2. Magnetic bit holders and quick-release holders
A decent holder keeps the bit seated and the screw straight when you are working one-handed off steps or reaching into corners. It also stops you dropping screws and bits into cavities, which is where time disappears.
3. Impact socket adaptors and nut setters
For brackets, fixings, and light bolting, an impact-rated adaptor and nut setters turn your Makita XGT site driver into a fast little fixer. Just keep it impact-rated so you are not twisting cheap adaptors apart.
4. Spare XGT batteries and a fast charger
If this is your main driver, a second battery is not optional. Nothing kills a day like waiting for a pack to charge when you are mid-run on fixings, especially in cold weather when runtime drops.
Shop Makita 40V XGT Impact Drivers at ITS
Whether you need a compact Makita XGT impact driver for daily carry or a Makita XGT high torque driver for heavy structural fixings, we stock the full range in one place. It is all held in our own warehouse, ready to pick, pack, and ship for next day delivery so you are not stood waiting when the job is live.
