EINHELL 3 PIECE KITS
Einhell 3 piece kit deals give you the core cordless gear for drilling, driving and cutting without buying bit by bit or juggling odd batteries.
If you're starting from scratch or replacing tired site kit, an einhell 3 piece kit is the sensible way in. Most lads want the everyday tools covered first, and that's exactly where these sets earn their keep. You get an einhell cordless kit built around the Power X Change platform, so batteries swap across the tools you actually use week in, week out. Have a look through the Einhell cordless kits range and pick the einhell combo kit that matches the jobs on your list.
What Are Einhell 3 Piece Kits Used For?
- Covering first fix jobs where you need a drill driver, impact driver and saw ready to go, without dragging separate chargers and mismatched batteries from the van.
- Handling day to day fitting work such as fixing battens, drilling timber and masonry, driving long screws and trimming sheet or timber on refurbs and snagging runs.
- Setting up a new starter kit for apprentices, improvers or part time site teams who need proper cordless gear that all runs on the same battery platform.
- Keeping maintenance work moving in housing, workshops and site cabins where one einhell tool kit can deal with drilling, cutting and fastening jobs across the day.
Choosing the Right Einhell 3 Piece Kit
Match the kit to the jobs you do most. Do not pay for tools that will sit in the case all year.
1. Start with the Core Tools
If your week is mostly drilling, fixing and general install work, stick with kits built around a combi drill and impact driver. If you are cutting sheet, trim or stud regularly, make sure the third tool is a saw you will genuinely use, not just the cheapest extra in the box.
2. Check Battery and Charger Contents
Some einhell cordless kit bundles include batteries and a charger, some do not. If this is your first step into the range, a ready to run set saves hassle. If you already own Einhell Power X-Change batteries, a bare kit can make better sense.
3. Buy into the Platform, Not Just the Deal
If you know you will add garden kit, site lights or more power tools later, choose an einhell power x change kit as your base. The whole point is one battery system across the lot, so future buying stays simple and cheaper.
4. Think About Who the Kit Is For
If it is for an apprentice or light site use, a straightforward three tool starter set is usually enough. If it is for full time trade use, look harder at battery capacity, charger speed and whether the tool mix matches proper working days rather than occasional jobs.
Who Uses These Kits?
- Chippies go for an einhell 3 piece kit when they need the daily basics covered for studwork, boarding and general fixing without overcomplicating the loadout.
- Sparkies use these sets for cable runs, back box fixing, trunking and cutting access points, especially when they want one battery system across several tools.
- Kitchen fitters and maintenance teams keep an einhell combo kit handy because it sorts drilling, screwdriving and trimming jobs in one grab from the van.
- Apprentices and home renovators swear by an einhell starter kit as a practical way to get onto the Power X Change platform without buying every tool separately.
The Basics: Understanding Einhell Power X Change Kits
The main thing with these kits is not the number of tools. It is the battery platform behind them. Here is what matters on site.
1. One Battery System Across the Kit
An einhell 3 piece kit runs on the Power X Change platform, which means the same battery fits each compatible tool. On the job, that cuts down on spare chargers, odd packs and wasted time hunting the right battery.
2. Kits Are Built Around Everyday Tasks
Most einhell combo kit sets pair drilling and driving tools with one cutting tool. That gives you a practical spread for first fix, fitting and maintenance, rather than loading you up with specialist kit you might only use once a month.
3. You Can Build Out From There
Once you are on the platform, you can add more Einhell Power X-Change tools as the work changes. That is why these kits suit both first time buyers and trades who want to standardise their cordless setup.
Accessories That Make an Einhell 3 Piece Kit More Useful
A decent kit gets you started, but these extras stop downtime and make the set work harder on real jobs.
1. Spare Batteries
One battery in the tool and one on charge is the simple way to keep moving. If your set only comes with a single pack or lower capacity batteries, add extra Einhell Power X-Change batteries so you are not stuck waiting halfway through a cut or fixing run.
2. Fast Charger or Spare Charger
A second or faster charger saves the usual bottleneck when several tools are sharing the same packs. It is worth looking at Einhell chargers if the kit is going to be used all day rather than for the odd quick job.
3. Twinpack Add Ons
If three tools gets you close but not quite there, adding one of the Einhell twinpacks is a tidy way to fill the gap without starting a second battery platform.
Choose the Right Einhell 3 Piece Kit for the Job
Pick the tool mix that matches the work you do most weeks.
| Your Job | Category or Type | Key Features |
|---|---|---|
| General first fix and site fixing | Combi drill and impact driver set with saw | Good all round spread for drilling, driving and rough cutting on timber and sheet. |
| Kitchen fitting and interior installs | Drill driver based combo kit | Better control for hinges, carcasses and cleaner fixing work, plus a cutting tool for trims. |
| Maintenance and snagging | Compact einhell cordless kit | Lighter tools, easier van storage and enough coverage for mixed repair work through the day. |
| Starting a fresh battery platform | Einhell starter kit with batteries and charger | Gets you working straight away with no extra spend before the first job. |
| Expanding an existing Power X Change setup | Body focused einhell combo kit | Best value if you already own batteries and only need more tools on the same system. |
Common Buying and Usage Mistakes
- Buying the cheapest kit without checking the third tool usually ends with one machine never leaving the case. Make sure the tool mix matches your actual work, not just the headline price.
- Assuming every einhell 3 piece kit includes batteries and a charger catches plenty of buyers out. Always check the box contents or you can end up with tools on site and no way to run them.
- Starting on a battery platform with one small pack only slows the whole day down. If you are working properly, add another battery so one can charge while the other is in use.
- Using a light duty starter set for constant heavy cutting or drilling will wear it out faster and frustrate you. Be honest about workload and buy the kit for full day use if that is what the job needs.
3 Piece Kits vs Twinpacks vs Single Tools
3 Piece Kits
Best when you need a proper working setup in one hit. An einhell 3 piece kit usually gives you drilling, driving and cutting covered, so it suits first time buyers and trades replacing older mixed gear.
Twinpacks
A twinpack makes more sense if you have already got batteries and just need the two tools you use most. It is a tighter buy than a full kit when you do not need an extra saw or duplicate drill.
Single Tools
Single tools are the right move for replacing one failed machine or adding something specialist. They are less useful as a starting point because the cost builds quickly once you add batteries and chargers.
Maintenance and Care
Keep the Tools Clean
Brush dust and chips out after use, especially around vents, chucks and blade clamps. Letting site muck build up makes tools run hotter and wear quicker.
Look After the Batteries
Do not leave packs loose in a damp van or flat for weeks on end. Charge them properly, store them dry and rotate them so one battery does not do all the work.
Check Consumables and Fittings
Blunt blades and worn bits make the whole kit feel underpowered. Swap them early and keep the right accessories fitted so the tools are not fighting the job.
Store the Kit Together
Keep batteries, charger and tools in one case or one van box. It sounds obvious, but half the wasted time on site comes from hunting missing parts from one set.
Why Shop for Einhell 3 Piece Kits at ITS?
Whether you need a straightforward einhell starter kit, a fuller einhell cordless kit or extra tools to build out your setup, we stock the range properly. That means the key kits, batteries, chargers and add ons are all in our own warehouse, in stock and ready for next day delivery.
Einhell 3 Piece Kit FAQs
What tools are included in an Einhell 3 piece kit?
It varies by set, but most often you are looking at a drill or combi drill, an impact driver, and a third tool such as a circular saw, jigsaw, recip saw or multi tool. Check the exact contents before you buy, because the third tool is what decides whether the kit suits first fix, fitting or general maintenance.
Do Einhell kits include batteries and a charger?
Some do and some do not. That is the honest answer. If it is your first Einhell buy, a kit with batteries and charger is the cleanest way to get going. If you already run Power X Change, you may be better off buying a set that leaves those out and using what you have.
Are Einhell kits compatible with the Power X-Change platform?
Yes, that is one of the main reasons to buy them. Power X Change batteries are designed to work across compatible Einhell cordless tools, so one platform can cover your drill, driver, saws and plenty more. It keeps the setup simple and stops you buying into separate battery systems.
Is an Einhell 3 piece kit enough for site work, or is it more of a home setup?
For general fixing, fitting, snagging and lighter first fix, yes, these kits do the job well. If you are hammering tools flat out every day on heavier commercial work, just be careful to choose the right set, battery size and tool mix rather than assuming every three piece bundle is built the same.
Can I expand the kit later without changing batteries?
Yes. That is the real value of starting with this platform. Once you have the charger and batteries sorted, you can add more compatible tools as jobs change, instead of starting again with another brand or another battery setup.
