Dewalt TSTAK 2.0 Toolboxes With Drawers
DeWalt TSTAK 2.0 drawers keep fixings, bits and hand tools sorted, stacked and easy to grab, without tipping half the box out on the job.
If you're fed up rooting through one deep box for screws, blades or testers, this is the better way to set your kit up. DeWalt TSTAK 2.0 drawers suit sparks, chippies and maintenance teams who need small gear organised, visible and locked into a stack that still travels well in the van. A proper DeWalt TSTAK 2.0 tool box is fine for bulkier gear, but drawer units save time on repetitive jobs where you're in and out all day. If you're building a full stack, start with the right DeWalt TSTAK 2.0 tool boxes and choose the drawer layout that fits how you actually work.
What Are DeWalt TSTAK 2.0 Drawers Used For?
- Sorting screws, clips, rawl plugs and consumables on first fix jobs where you need to reach the right size fast without emptying a full box onto the floor.
- Keeping testers, hole saws, multi tool blades and marking gear separate for sparks and fitters moving room to room on snagging and install work.
- Loading van stock in a way that stops smaller bits getting buried under drills, chargers and hand tools during the weekly knockabout.
- Setting up a modular site storage stack where drawer access saves you unclipping the whole tower every time you need one pouch of fixings.
- Backing up larger transport kit with DeWalt TSTAK 2.0 wheeled toolboxes when you want drawers for organisation but still need a rolling base for heavier loads.
Choosing the Right DeWalt TSTAK 2.0 Drawers
Sorting the right one is simple: match the drawer layout to what you reach for most, not what looks tidy in the van.
1. Shallow Drawers for Small Kit
If you're mainly carrying screws, clips, terminals, blades and drill bits, shallow DeWalt TSTAK 2.0 storage drawers make more sense. You can see what you've got, split sizes properly and stop the usual mess of mixed consumables.
2. Deeper Drawers for Mixed Tools
If the drawer unit needs to hold bulkier hand tools, larger accessories or boxed fixings, go for deeper drawers. Small drawers are brilliant until you start forcing awkward gear into them and wasting the space.
3. One Drawer Unit or a Full Stack
If this is just for bench stock or van organisation, one DeWalt TSTAK drawer unit will do the job. If you're building a proper modular setup, make sure it works alongside your other DeWalt TSTAK drawers and latching cases so the whole stack stays useful.
4. Site Access Matters
If you're constantly working in finished rooms, plant rooms or tight corridors, drawers are the better pick because you can get to your gear without taking the whole lid space. If you're mostly throwing in bigger tools, a standard box is still the simpler option.
Who Uses These on Site?
- Sparkies swear by DeWalt TSTAK 2.0 drawers for connectors, glands, screws and testers because they can keep small electrical bits separated and easy to grab during first and second fix.
- Chippies use a DeWalt TSTAK drawer box for hinges, brackets, countersink bits and blades when fitting kitchens, doors and finish carpentry where staying organised saves repeat walks to the van.
- Maintenance teams like these drawer units for mixed snagging kit because one stack can carry fixings, hand tools and spares without everything rattling into one heap.
- Fitters and van based trades often pair drawer units with DeWalt TSTAK trolleys so they can move a full storage setup through schools, offices and occupied buildings without endless trips.
The Basics: Understanding DeWalt TSTAK 2.0 Drawers
These are built to keep smaller kit organised inside a stackable storage system. The main thing to understand is not power or spec. It is access, layout and compatibility across the stack.
1. Drawer Access vs Top Opening Boxes
A drawer unit lets you get straight to screws, blades and hand tools without unclipping boxes stacked above. That matters on site when the stack is against a wall or wedged in the van and you just need one thing quickly.
2. TSTAK 2.0 is a Modular Stack
DeWalt TSTAK 2.0 toolboxes are made to clip together as one storage system. You build the stack around how you work, with drawers for small kit, open boxes for bulky gear and rolling bases for transport.
3. Drawer Layout Changes the Job Flow
More shallow drawers suit consumables and parts you need sorted by size. Fewer deeper drawers suit hand tools and boxed accessories. Pick the wrong layout and you either waste space or end up stuffing everything back into one drawer.
Accessories That Make TSTAK Drawer Setups Work Harder
A drawer unit is only half the job. The right add ons make it easier to move, stack and actually use on site.
1. Wheeled Base or Rolling Box
If your stack is getting heavy, add a rolling base. It saves your back and stops the usual shuffle of carrying three clipped boxes and a drawer unit through car parks, corridors and lift lobbies.
2. Trolley
A proper trolley makes a big difference when you're moving stacked storage around larger sites. You will be glad of it when the van is parked two blocks away and you've got fixings, tools and testers to drag in.
3. Standard Top Opening Box
Use a top opening box in the same stack for bulkier gear that does not belong in drawers. It saves you jamming in chargers, drills or larger hand tools that just waste drawer space and make access awkward.
Choose the Right DeWalt TSTAK 2.0 Drawers for the Job
Here is the simple way to choose the layout that will actually earn its keep.
| Your Job | Category or Type | Key Features |
|---|---|---|
| Carrying screws, clips and consumables for first fix | Shallow drawer unit | Better separation, quicker visibility, less digging about for small parts |
| Keeping hand tools and accessories together for snagging | Deeper drawer unit | More room for mixed kit, boxed fixings and awkward shaped tools |
| Building a full van storage stack | Drawer unit with matching TSTAK 2.0 cases | Clip together compatibility, easier stacking, access to small gear without unpacking |
| Moving heavier loads through larger sites | Drawer unit on a wheeled base | Less carrying, safer transport, quicker moves from van to work area |
| Bench stock or workshop organisation | Single drawer box | Fast access, tidy storage, keeps regular fixings and accessories in one place |
Common Buying and Usage Mistakes
- Buying drawers for bulky tools instead of small kit is a common mistake. You end up wasting space and fighting the layout, so keep drawer units for organised access and use larger boxes for bigger gear.
- Ignoring stack weight soon catches people out. A full drawer stack gets heavy quickly, so if you are loading it with fixings and hand tools, sort out wheels or a trolley before your back reminds you.
- Mixing consumables without dividers or any system defeats the point of a DeWalt TSTAK 2.0 toolbox with drawers. Label the drawers or assign them by trade task, otherwise you are still hunting for bits the same as before.
- Assuming every job needs a drawer unit can be the wrong call. For cordless tools, chargers and larger items, a standard top opening box is often quicker and more practical.
- Overloading one drawer with dense fixings wears the setup harder and makes access awkward. Spread the load across the unit and keep heavier stock lower in the stack where it is steadier to move.
Drawer Units vs Top Opening Boxes vs Wheeled Toolboxes
Drawer Units
Best for small tools, fixings and consumables you need to reach quickly. They are the smart choice for organised access, but not the one for larger power tools or awkward kit.
Top Opening Boxes
Better for bulkier tools, chargers and grab and go general kit. You get more open space, but you lose the neat separation that makes drawers quicker on repetitive work.
Wheeled Toolboxes
These come into their own when the load is heavy and the walk in is long. They are built for transport first, so pair them with drawer units if you need both movement and organisation.
Maintenance and Care
Keep the Runners Clear
Dust, plaster and loose screws in the drawer channels soon make them rough to use. Empty them out now and then and wipe the runners so the drawers still slide properly.
Do Not Overload One Drawer
Dense fixings add up quickly. Spreading the load stops one drawer taking all the punishment and keeps the unit easier to lift, stack and move.
Check the Latches and Stack Points
If you clip drawer units into a full stack every day, have a quick look over the latches and connection points. Any damage there is what causes wobbly stacks and awkward transport.
Store Them Dry
They are site kit, but there is no point leaving them wet in the van for days. Dry storage helps protect the contents as much as the box, especially for blades, bits and electrical testers.
Replace Badly Cracked Units
If the shell or drawer fronts are badly cracked after a drop, do not just keep clipping it into the stack and hope for the best. Replace damaged units before they fail in transit and spill gear everywhere.
Why Shop for DeWalt TSTAK 2.0 Drawers at ITS?
Whether you need a single DeWalt TSTAK drawer box for van stock or a full DeWalt TSTAK 2.0 toolbox setup with storage drawers, we stock the range. That means drawer units, matching cases and stackable storage options all in one place, held in our own warehouse and ready for next day delivery.
DeWalt TSTAK 2.0 Drawers FAQs
What is DeWalt TSTAK 2.0?
DeWalt TSTAK 2.0 is DeWalt's modular storage system for tools, accessories and site gear. The main point is that the boxes and drawer units clip together into one stack, so you can build a setup that suits your trade instead of lugging loose cases about.
How many drawers do TSTAK 2.0 toolboxes have?
It depends on the model. Some TSTAK 2.0 toolboxes use a two drawer layout, while others are set up differently for deeper storage. The important bit is not just drawer count, but whether you need shallow drawers for consumables or deeper ones for mixed tools.
Are TSTAK 2.0 boxes compatible with the original TSTAK?
Yes, in general TSTAK 2.0 boxes are designed to stay compatible with the original TSTAK system. That is a big help if you are upgrading an existing stack and do not want to replace everything in one go. It is still worth checking individual product details if you are mixing older and newer pieces.
Are DeWalt TSTAK 2.0 drawers any good for power tools?
For smaller power tools and accessories, yes. For bulkier drills, combis, grinders and chargers, not really. Drawer units are best where organisation matters more than open space, so most trades use them for bits, blades, fixings and hand tools rather than the main cordless kit.
Will the drawers open properly when the unit is stacked?
Yes, that is the whole point of this style of box. You can keep the stack together and still get at the drawers from the front, which is far easier than unstacking top opening cases just to grab one pouch of screws or a tester.
Are these worth it for van organisation?
Yes, especially if your van is full of smaller stock that usually ends up mixed together. A DeWalt TSTAK drawer unit keeps fixings, accessories and hand tools sorted so you spend less time digging about and less money replacing bits you already had.
