Worx 20V Combi Drills
Worx 20V combi drill kit covers timber, metal and masonry jobs, giving you one drill for fixings, pilot holes and light hammer work around site or home.
If you're hanging battens, drilling plugs into block, or running fixings into timber, a worx 20v combi drill gives you the three modes that actually matter drill, drive and hammer. These Worx 20V cordless combi drill models suit van kits, snagging, maintenance and general install work where you want one light tool instead of carting separate gear. If you already run the platform, look at the wider Worx 20V Drills and Drivers range and pick the right worx combi drill for the jobs you do most.
What Jobs Are Worx 20V Combi Drills Best At?
- Drilling pilot holes in stud, carcassing and sheet material is where a worx 20v cordless combi drill earns its keep, especially when you are fitting kitchens, boxing in pipework or doing second fix timber work.
- Driving screws into timber, plasterboard battens and general fixings makes these a solid choice for day to day install work, saving you swapping between old mains drills and separate drivers for smaller jobs.
- Hammer drilling into brick and block for plugs, clips and light anchor points is exactly what a worx 20v hammer drill is built for, whether you are fixing trunking, shelving or exterior fittings.
- Working through snagging lists on refurbs and maintenance jobs suits a worx combi drill set well, because you can drill, drive and nip round awkward areas without dragging leads through occupied spaces.
- Keeping a cordless drill in the van for mixed callout work is one of the main reasons trades buy a worx combi drill 20v uk model, as it covers timber, metal and occasional masonry without much fuss.
Choosing the Right Worx 20V Combi Drill
Sorting the right one is simple. Match the drill to the material you hit most, not the badge on the side.
1. Drill Driver or Combi Drill
If you only ever drill timber, metal and board, a standard drill driver can do the job. If you regularly need to get plugs into brick or block, go straight for a worx 20v combi drill with hammer mode and save yourself carrying a second drill.
2. Body Only or Full Kit
If you already own Worx 20V gear, a body version makes sense. If this is your first tool on the platform, buy a worx combi drill set with batteries and charger so you are not stuck waiting when the first pack goes flat.
3. Chuck Size and Capacity
For general site and install work, a 13mm chuck is the one to look for because it gives you better flexibility with common masonry, wood and metal bits. Do not buy too light if you expect it to run larger bits or tougher fixings all week.
4. Light Masonry or Regular Hammer Work
A worx 20v hammer drill is fine for brick, block and plug holes. If you are drilling concrete all day or boring bigger anchor holes, step up to SDS kit instead of asking too much from a compact cordless combi.
Who Uses These on Site?
- Sparkies use a worx 20v combi drill for fixing back boxes, clips, tray supports and timber pattresses, especially on small first fix and maintenance work where one drill needs to cover most of the day.
- Kitchen fitters and chippies reach for a worx combi drill when they are pilot drilling cabinets, driving hinge screws and drilling into masonry walls for brackets and fixings during install.
- Plumbers and heating engineers keep a worx 20v percussion drill in the van for bracket fixing, pipe clip runs and general plant room jobs where they hit timber one minute and blockwork the next.
- Maintenance teams and landlords like these for snagging and repair work, because a 20V combi drill handles mixed materials without needing a full site setup.
The Basics: Understanding Combi Drills
A combi drill does three jobs in one tool. The key is knowing which mode to use so you get cleaner holes, better fixing control and less wear on the drill.
1. Drill Mode
This is for plain drilling in wood, metal and plastics. It gives you straight rotary drilling without the hammer action, which means cleaner holes and less chance of damaging bits or fixings.
2. Driver Settings
The clutch settings stop you overdriving screws into plasterboard, soft timber or cabinet work. That matters when you want repeated fixing depth without chewing heads or sinking screws too far.
3. Hammer Mode
This adds a knocking action for drilling into brick and block. It is ideal for plug holes and lighter fixing work, but it is not a replacement for an SDS drill when concrete or bigger holes are on the job sheet.
Worx 20V Combi Drill Extras That Save Time
A few sensible extras stop the usual hold ups on site and make your drill far more useful day to day.
1. Spare Batteries
A spare pack is the obvious one. Do not get caught halfway through fixings or up steps with a flat battery and no backup. The Worx 20V Batteries, Chargers and Mounts range keeps your drill working instead of sitting dead in the van.
2. Drill and Screwdriver Bit Sets
A decent mixed set covers pilot drilling in timber, metal bits for brackets and the masonry sizes you actually use for red plugs and brown plugs. It saves hunting for odd singles every time a snagging job changes material.
3. Fast Charger
If the drill is in daily use, a faster charger is worth having. It cuts downtime between jobs and keeps a second battery turning round while you carry on working.
Choose the Right Worx 20V Combi Drill for the Job
Use this quick guide to sort the right setup for the work in front of you.
| Your Job | Category or Type | Key Features |
|---|---|---|
| General van kit and home to site repairs | Compact Worx 20V combi drill | Light weight, drill drive hammer modes, good for mixed materials and quick callouts |
| Kitchen fitting and second fix work | Worx 20V cordless combi drill with 13mm chuck | Better bit compatibility, clutch control for fixings, enough hammer action for wall brackets |
| Regular brick and block fixing | Worx 20V hammer drill kit with spare battery | Hammer mode, extra runtime, better suited to repeated plug holes and bracket fixing |
| First step into the Worx platform | Worx combi drill set | Battery, charger and case or bag included, ready to work straight out the box |
| Existing Worx user adding another drill | Body only Worx combi drill | Lower cost if you already own batteries, ideal for adding a second tool to the van |
Common Buying and Usage Mistakes
- Buying a combi drill for heavy concrete work is a common one. It will handle brick and block well enough, but if your days are full of concrete drilling, you really need SDS or you will waste time and batter the tool.
- Choosing body only without checking your battery setup catches plenty of people out. If you have no compatible packs or charger yet, the cheaper drill soon stops looking cheap when you still cannot use it that day.
- Running hammer mode on timber or metal just chews bits and gives rough results. Use standard drill mode for clean holes and only switch to percussion when you are actually in masonry.
- Ignoring chuck capacity limits what bits you can run. A 13mm chuck gives you more options for common site drilling, so check this before buying if you use larger masonry or metal bits.
- Expecting one battery to cover a full shift is optimistic on mixed drilling and driving work. Keep a second pack charged or the job slows down the minute the first one drops off.
Combi Drill vs Drill Driver vs Impact Driver
Worx 20V Combi Drill
This is the all rounder. It drills wood and metal, drives fixings, and adds hammer action for brick and block. If your jobs change by the hour, this is the sensible one to keep close by.
Drill Driver
A drill driver is usually lighter and perfectly good for timber, sheet material and metal. It falls short once you need to drill masonry, so it suits bench work, fitting and joinery more than mixed site jobs.
Impact Driver
An impact driver is the better tool for repeated long screws, coach screws and stubborn fixings. It is not your main drilling tool though. If driving is the bigger part of your day, look at Worx 20V Impact Drivers alongside a combi drill.
When to Own Both
A combi and an impact together save loads of swapping on install work. Drill your pilot with one, drive fixings with the other, and you move through timber and masonry jobs much quicker.
Maintenance and Care
Keep the Chuck Clean
Dust and fine grit in the chuck soon starts affecting grip. Open it off now and then, blow it clear and wipe it down so bits seat properly and do not slip under load.
Use the Right Mode
Do not leave it in hammer mode out of habit. Using the correct setting for wood, metal or masonry cuts wear on the gearbox and gives you cleaner, faster results.
Look After the Batteries
Recharge packs before they are completely dead if you can, and do not leave them rolling round the van in freezing or roasting conditions. Battery care makes more difference to day to day performance than most people admit.
Check Bits Before Blaming the Drill
A worn masonry bit or rounded driver bit makes the drill feel weaker than it is. If holes are taking too long or screws are camming out, swap the accessory first before assuming the tool is the problem.
Store It Properly
Keep the drill in its case or a dry tool box when it is not in use. That stops the chuck getting knocked, keeps dust off the vents and gives the tool a much better chance of lasting.
Why Shop for Worx 20V Combi Drills at ITS?
Whether you need a compact worx 20v combi drill for general fixing work or a worx combi drill set with batteries and charger, we stock the proper range in one place. You will also find matching Worx 20V More Power Tools and even Worx 20V Garden Power Tools if you are building out the platform. It is all held in our own warehouse, in stock and ready for next day delivery.
Worx 20V Combi Drill FAQs
What combi drills does Worx make in the 20V range?
Worx makes 20V combi drills aimed at general drilling, screwdriving and light hammer drilling duties. The exact line up can vary, but the range usually covers body only tools and kits with batteries and charger, so check the product listing for what is actually included.
Can the Worx 20V combi drill be used for masonry drilling?
Yes, for brick and block it is the right sort of tool. A worx 20v cordless combi drill uses hammer mode for plug holes and lighter masonry fixing work. Just be realistic. For repeated concrete drilling or larger holes, an SDS drill is still the proper answer.
What chuck size does the Worx 20V combi drill have?
Many Worx 20V combi drill models use a 13mm chuck, which is the size most trades want for mixed drilling jobs. It gives you room for common wood, metal and masonry bits, but always check the product spec on the exact model before ordering.
Does the Worx 20V combi drill come with a carry case?
Some kits do and some do not. Body only drills often come without a case, while fuller worx combi drill set options may include one. The safest way is to read the in the box details rather than assuming it is supplied.
Is a Worx 20V combi drill enough for everyday trade jobs?
For mixed maintenance, fitting, snagging and general install work, yes, it covers a lot. If your days are mostly pilot holes, fixings and the odd plug in masonry, it is a useful all rounder. If you are on heavy first fix or drilling all day, you may want more specialised kit beside it.
Can I buy the drill body first and add batteries later?
Yes, if you already run the platform that is often the cheapest route. If not, it is usually better to start with a kit so you can get to work straight away rather than piecing it together afterwards.
