Worx 20V Chargers
A Worx 20V charger keeps your PowerShare batteries turning round properly, so drills, garden kit and site gear are not sat dead when the job starts.
If you're already running PowerShare kit, the charger matters just as much as the battery. A proper worx 20v battery charger keeps packs topped up between jobs, cuts waiting about on site, and makes sense whether you need a compact spare, a worx fast charger 20v, or a worx 20v dual charger for heavier daily use. If you are sorting your full setup, look through Worx 20V Batteries, Chargers and Mounts and pick the charger that suits how many packs you actually burn through in a day.
What Are Worx 20V Chargers Used For?
- Keeping your Worx PowerShare batteries rotating through the day means your drill, driver or cutter is back in your hand instead of sat on the floor waiting for a pack to recover.
- Charging spare packs in the van, workshop or site office helps trades running Worx 20V Drills and Drivers stay working through first fix, snagging and general maintenance jobs.
- Topping up larger battery packs for hedge cutters, blowers and other Worx 20V Garden Power Tools cuts downtime when you are clearing plots, tidying handovers or sorting property maintenance.
- Using a worx fast charger 20v or worx powershare charger is the practical choice when you are swapping between several packs and cannot afford to lose half the morning to charging time.
- Running a worx 20v dual charger makes life easier for anyone with multiple batteries on the go, especially when one pack is in the tool and the next two are getting turned round ready.
Choosing the Right Worx 20V Charger
Sorting the right worx 20v charger is simple: match the charger speed and battery count to how many packs you actually get through, not what looks good on paper.
1. Standard Charger or Fast Charger
If you only run one or two batteries for light jobs, a standard worx 20v battery charger will usually do the job fine. If you are on the tools all day and burning through packs back to back, go for a worx fast charger 20v so you are not hanging about waiting.
2. Single Bay or Dual Charger
If you own several PowerShare packs, a worx 20v dual charger is worth it. One battery in the tool and two on charge is a far better setup than queueing packs one at a time when the work is piling up.
3. Battery Size Matters
Bigger capacity batteries take longer to fill, simple as that. If most of your kit runs larger Ah packs for longer jobs, choose a charger with the output to turn them round properly rather than leaving them on charge for ages.
4. Buy Around the Full PowerShare Setup
If your batteries are shared across drills, garden tools and cordless cutting kit, stick with a proper worx powershare charger. It keeps your setup straightforward and stops you ending up with chargers that do not suit how your packs are used day to day.
Who Uses These Worx 20V Chargers?
- Maintenance teams use a worx 20v charger to keep everyday drill, driver and cutting batteries ready for callouts, repairs and small install jobs across the day.
- Joiners, kitchen fitters and snagging trades keep a worx charger for 20v battery on the bench so spare packs are always charging while they work through punch lists and final fixes.
- Grounds and property teams rely on a worx powershare charger when they are rotating batteries between blowers, trimmers and other cordless kit over a full shift.
- General trades already running Worx 20V More Power Tools or Worx 20V Multi Tools usually keep at least one spare charger in the van so a flat pack does not hold the whole job up.
The Basics: Understanding Worx 20V Chargers
A charger is not just a plug for the wall. The main thing to understand is how quickly it can turn batteries round and how many packs it can manage at once.
1. Charging Speed
A standard charger is fine for topping packs up overnight or between lighter jobs. A faster charger is what you want when batteries are being emptied and reused through the same shift.
2. Battery Capacity and Charge Time
The larger the battery capacity, the longer it takes to charge. That matters if you run bigger packs in saws, garden tools or heavier-duty cordless kit, because the charger can become the bottleneck if it is too slow.
3. Single vs Dual Bay Charging
A single bay charger handles one battery at a time and suits lighter use. A dual charger is the better call for busy users with several packs on rotation, because it keeps more of your kit ready without the usual waiting about.
Worx 20V Charging Gear That Keeps You Moving
The right extras stop flat batteries slowing the whole day down.
1. Spare Worx 20V Batteries
A spare pack is the obvious one. If your only battery is on charge, the tool is useless, so keeping another charged and ready saves repeated walks back to the socket and stops jobs stalling halfway through.
2. Battery Mounts
Battery mounts keep packs and chargers stored properly in the van or workshop instead of rattling about loose. It is a simple fix that stops damage, keeps the setup tidy and means you can actually find the charged pack when you need it.
3. Fast Chargers
If your standard charger cannot keep up, upgrade before it starts costing you time. A faster charger makes a real difference when you are rotating batteries across several tools through one shift.
Choose the Right Worx 20V Charger for the Job
Use this quick guide to match the charger to how hard your batteries work.
| Your Job | Charger or Type | Key Features |
|---|---|---|
| Occasional drilling, fixing and home maintenance | Standard single worx 20v charger | Simple setup, suits one or two packs, ideal for overnight or between-job charging |
| Daily use on drills, drivers and multi tools | Worx powershare charger | Shared platform compatibility, dependable battery rotation, straightforward van or bench charging |
| Busy shifts with several flat batteries on the go | Worx fast charger 20v | Quicker turnaround, less downtime, better for repeated charge cycles through the day |
| Running multiple packs across several tools | Worx 20v dual charger | Charges more than one battery, better for teams or heavier cordless use, cuts queueing time |
| Larger capacity battery packs for longer runtime tools | Higher output worx 20v battery charger | Better suited to bigger Ah packs, more practical if standard chargers are too slow |
Common Buying and Usage Mistakes
- Buying a standard charger when you use several batteries every day is the usual mistake. It works, but charge times soon become the hold-up, so step up to a faster charger or dual charger if you are constantly waiting.
- Assuming every battery charges at the same speed catches people out. Larger capacity packs take longer, so check the charger output properly if most of your kit runs bigger batteries.
- Only owning one charger is fine until it is left at home, buried in the van or tied up with another pack. A spare charger on the bench or in the van saves a lot of needless messing about.
- Leaving batteries loose in damp vans or dirty corners shortens their life and makes charging less reliable. Keep packs and chargers clean, dry and stored properly between jobs.
- Trying to run a growing PowerShare setup without reviewing your charging setup is false economy. More tools and more batteries usually means you need quicker charging or extra bays to keep pace.
Standard Charger vs Fast Charger vs Dual Charger
Standard Charger
Best for lighter use, occasional jobs and users with only one or two batteries. It is the sensible choice if your packs can charge overnight or while you are off the tools, but it is not ideal for heavy daily rotation.
Fast Charger
Better for regular site use where dead batteries need turning round quickly. If you are drilling, cutting or clearing all day, a fast charger saves more time than most people think and keeps the kit earning its keep.
Dual Charger
The right call for users with several packs or multiple tools sharing the same batteries. It is less about outright speed and more about keeping two batteries moving through the cycle instead of waiting in line one by one.
Maintenance and Care
Keep the Contacts Clean
Dust, plaster and general site muck on the battery or charger terminals can affect charging. Give the contacts a quick wipe now and then so the pack seats properly and charges as it should.
Store It Somewhere Dry
Do not leave the charger rolling about in a damp van footwell or open shed. Dry storage helps protect the electronics and avoids corrosion on the contacts and plug.
Check Leads and Plugs
If the cable is nicked, trapped or starting to split, sort it before it becomes unsafe. Chargers live hard lives on benches and van floors, so give the lead a proper look over.
Do Not Cook Batteries
Charge batteries in sensible conditions and let hot packs cool down after heavy use before sticking them straight on charge. It is a simple habit that helps battery life in the long run.
Replace Faulty Chargers Early
If a charger starts charging intermittently, running unusually hot or failing to recognise packs, do not keep chancing it. Replace it before it wastes batteries or leaves you short on a working day.
Why Shop for Worx 20V Chargers at ITS?
Whether you need a compact worx 20v charger, a worx fast charger 20v, or a worx 20v dual charger to keep more batteries moving, we stock the full PowerShare charging range in one place. It is all held in our own warehouse, ready for next day delivery, so you can get the right charger on site without hanging about.
Worx 20V Charger FAQs
What chargers does Worx make for 20V batteries?
Worx makes standard single-battery chargers, faster charging options, and on some ranges a worx 20v dual charger for users running more than one pack. The right one depends on whether you just need a spare bench charger or something that can keep up with daily battery rotation.
How long does the Worx 20V charger take to fully charge a battery?
It depends on both the charger output and the battery capacity. Smaller Ah packs charge quicker, while larger batteries take longer. A worx fast charger 20v will cut waiting time down, but always check the spec on the charger and pack together rather than guessing.
Is the Worx 20V charger compatible with all battery capacities?
Yes, a proper worx powershare charger is built to work across the compatible Worx 20V PowerShare battery range, but charge times will vary with capacity. The main thing is not compatibility, it is whether your charger is quick enough for the size of packs you use most.
Does Worx make a dual battery charger?
Yes, Worx does offer dual charging options on some 20V PowerShare ranges. They are worth a look if you run several batteries across drills, garden tools or cordless cutting kit and need more than one pack charging at the same time.
Do I need a fast charger or is a standard one enough?
If you are only using one or two batteries for occasional work, a standard charger is usually enough. If you are on the tools every day and regularly flattening packs, a faster charger soon pays for itself in saved downtime.
Can I leave my Worx battery on charge in the van overnight?
You can, but only if the van stays dry and the temperature is sensible. In real trade use, chargers and batteries last better when stored somewhere clean and dry rather than in a cold damp van where condensation gets into everything.
