Workwear Shop All
Workwear is what keeps you moving when the weather turns, the site gets rough, and cheap kit starts falling apart halfway through the week.
If you're on the tools every day, your workwear wants to cope with kneeling, lifting, crawling through voids and standing out in the rain without splitting seams or riding up. This is where you sort proper all workwear for site, workshop and van use, from hard-wearing layers to trade staples that earn their keep. You can shop Work Clothes, pair them with Safety Boots & Trainers, and build a full kit that suits the graft. If you're replacing worn-out work clothing or kitting out for a new job, get the right gear and get stuck in.
What Is Workwear Best At?
- Working through first fix, snagging and fit-out jobs where trousers, hoodies and site tops take constant abuse from dust, fixings, kneeling and repeated washing.
- Keeping trades comfortable across long shifts, whether that means lightweight layers for hot lofts and summer groundwork or insulated gear for cold, wet morning starts.
- Handling outdoor site work where weather changes by the hour, especially when paired with Waterproof Workwear for jobs you cannot leave until it dries up.
- Meeting site rules and staying visible around plant, deliveries and roadside work when you add the right Hi Vis Workwear and task-specific kit.
- Building a proper head-to-toe setup for trade workwear and workwear and ppe so you're not turning up with mismatched gear that is uncomfortable by dinner time.
Choosing the Right Workwear
Sort your workwear by season, job and how hard you are on it. Do that, and you will not waste money on gear that looks fine on day one and gives up by Friday.
1. Match It to the Job
If you are mainly indoors on fit-out, lighter work clothes and stretch trousers make sense. If you are outside on groundwork, roofing or general building, go tougher and heavier with reinforced areas that can take kneeling and rough surfaces.
2. Layer for the Weather
Do not buy one thick jacket and hope for the best. A base layer, mid layer and outer shell works better across the year, because British weather flips fast and you need to add or lose layers without stopping the job.
3. Think About Site Rules
If you are working around traffic, plant or delivery yards, make sure your workwear covers the visibility requirement before you turn up. It is easier to buy the right hi vis from the start than get sent back to the van or off site.
4. Buy for Wash and Wear
If it is going in the wash two or three times a week, check the fabric and trim properly. Cheap cuffs, weak stitching and poor pocket linings are usually the first bits to fail, so regular site use needs gear built for repeat washing.
Who Uses These on Site?
- Builders, brickies and groundworkers rely on tough workwear that stands up to muck, sharp edges and kneeling all day, especially on external jobs where clothing gets soaked and dragged through the lot.
- Sparkies, plumbers and HVAC fitters go for trade workwear with decent movement and pocket space because they are up ladders, under floors and in cupboards all day carrying hand tools, fixings and testers.
- Chippies and joiners swear by hard-wearing work trousers, hoodies and site tops for first fix and second fix, where kit gets caught on timber, covered in dust and washed constantly.
- Warehouse teams, delivery drivers and maintenance crews use work clothing that is comfortable enough for long hours but still tough enough for loading, unloading and moving between yard, van and customer site.
Workwear Extras That Make Site Life Easier
The right extras stop your clothing setup falling short halfway through the week.
1. Knee Pads
If your trousers take inserts, get the knee pads. You will feel the difference the first day you are fixing skirting, laying floors or working low on kitchens instead of grinding your knees into concrete.
2. Belts and Braces
A decent belt or braces setup stops loaded trousers dragging down when your pockets are full of screws, snips and tape. It is a small fix, but it saves a full day of hitching your kit back up.
3. Base Layers
Base layers earn their keep on cold starts and exposed jobs. They add warmth without the bulk that gets in the way under hoodies, fleeces and jackets.
4. Gloves and PPE
Clothing alone is only half the setup. Add the right PPE and gloves so you are covered for dust, handling, cutting and general site hazards without making a second order later.
Choose the Right Workwear for the Job
Use this quick guide to sort the right workwear for the job in front of you.
| Your Job | Workwear Type | Key Features |
|---|---|---|
| General building and site labour | Work trousers and hard-wearing tops | Reinforced panels, decent pocket layout, durable fabric and room to move |
| Wet outside work and winter site days | Layered jackets and waterproof outerwear | Weather protection, sealed outer fabric, adjustable cuffs and enough room for layers |
| Roadside, delivery yard and plant areas | Hi vis workwear | Correct visibility level, hard-wearing fabric and comfort for long shifts |
| Indoor fit-out and van-based maintenance | Lightweight work clothing | Breathability, stretch, lower bulk and easy all-day wear |
| Kneeling trades like flooring, kitchens and snagging | Knee pad trousers | Insert pockets, tougher knee areas and better comfort on hard surfaces |
Common Buying and Usage Mistakes
- Buying purely on price usually means thin fabric, weak seams and pockets that blow out early. If you are wearing it five or six days a week, cheap workwear often costs more because you replace it twice as fast.
- Choosing one outfit for every season is where people get caught out. Heavy kit is miserable in summer, and light layers are no use on wet winter starts, so build your setup around the time of year and site conditions.
- Ignoring site requirements can stop the job before it starts. If the site needs hi vis, specific footwear or added protection, check before you turn up rather than assuming your usual gear will do.
- Getting the wrong fit causes more grief than most expect. Trousers that are too tight split when you kneel, and jackets that are too loose snag on materials, so buy for movement and layering, not just the label size.
- Washing work clothing too hot or drying it too hard can ruin shape, trims and coatings. Follow the care label, especially on waterproof and technical garments, or you will shorten their life for no reason.
Lightweight vs Waterproof vs Hi Vis Workwear
Lightweight Workwear
Best for indoor jobs, warmer months and van-based work where breathability matters more than weather protection. Good freedom of movement, but it is not the choice for exposed sites or heavy rain.
Waterproof Workwear
The right call for roofing, groundwork and outside jobs that carry on regardless. It keeps weather out properly, but some heavier waterproof pieces can feel warm or bulky if you are working indoors all day.
Hi Vis Workwear
Needed where visibility is part of site safety, especially around vehicles, roadside work and busy yards. It is about compliance as much as comfort, so check the class and coverage before buying.
What Most Trades Actually Do
Most lads do not stick to one type. They keep lightweight daily gear, add hi vis when the site says so, and carry waterproofs in the van for when the weather turns halfway through the shift.
Maintenance and Care
Brush Off Dirt Before Washing
Knock off dried mud, dust and debris before it goes in the machine. It helps the wash work properly and stops grit wearing the fabric out quicker.
Check Knees, Cuffs and Pockets
These are the first places to go on hard-used workwear. Small tears or loose stitching are worth sorting early before they turn into a split seam halfway through a shift.
Wash Technical Gear Properly
Waterproofs and treated fabrics need the care label followed. Too much heat or the wrong wash can kill water resistance and ruin the finish long before the garment should be done.
Dry It Fully Before Storing
Do not screw damp kit into the van or the bottom of a locker. Let it dry properly or you will end up with stale smells, mould and fabric that never feels right again.
Replace When It Stops Doing the Job
If the knees are gone, the zip keeps failing or the waterproofing has had it, retire it. Workwear is there to keep you comfortable and protected, not just to cover your back.
Why Shop for Workwear at ITS?
Whether you need mens workwear for everyday site use, construction workwear for rough jobs, or a full workwear shop order for the whole team, we have the range ready. From jackets, trousers and hoodies to specialist site layers and leading workwear brands, it is all in our own warehouse, in stock and ready for next day delivery.
Workwear FAQs
What does ITS Workwear include?
It covers the full day-to-day kit most trades actually wear on site, in the van and in the yard. That means work trousers, shorts, hoodies, jackets, fleeces, tops, base layers and weatherproof outerwear, with options for builders workwear, general trade workwear and site-safe clothing setups.
Do you offer next day delivery on workwear?
Yes. We hold a large workwear range in our own warehouse, so if it is in stock you can get it on next day delivery. That is handy when a jacket gives up, your site trousers split, or you need fresh gear before the next shift starts.
What workwear brands do you stock?
We stock a proper spread of trusted workwear brands used across UK sites, workshops and yards. The range covers everyday basics through to tougher branded gear for trades who are hard on their kit and need clothing that lasts through repeat wear and washing.
Can I return workwear if it doesn't fit?
Yes, if it does not fit right you can return it in line with the returns policy. That is worth knowing with workwear, because a good fit matters on site. You need enough room to move, kneel and layer up, but not so much that it catches or gets in the way.
Is this just winter kit, or can I sort year-round workwear here?
You can sort the lot for the full year. There is lightweight gear for warm jobs, mid layers for colder starts, and outerwear for wind and rain. Most trades are better off building a layered setup than relying on one bulky jacket for every season.
Will this workwear stand up to proper site use, or is it more for light duties?
A lot of it is built exactly for daily trade use, but the right choice depends on how rough your work is. If you are on sharp blockwork, kneeling constantly or working outside in all weather, pick tougher fabrics and reinforced designs rather than light casual pieces.
How do I know what workwear to buy first if I am starting from scratch?
Start with the bits you wear hardest. Usually that means trousers, site tops, a warm mid layer and a proper outer layer for weather. Then add task-specific items based on your site rules, the season and whether you are mainly indoors, outdoors or back and forth between both.
