Vaunt Tool Storage
Vaunt bit sets sort the everyday drilling and screwdriving jobs that chew through loose bits, with practical mixed sets built for site boxes and van storage.
If you're fed up rooting round for the right Pozi, Torx or pilot bit halfway through a fit-out, a vaunt bit set keeps the common sizes in one case and ready to grab. These vaunt drill screwdriver bit set options suit first fix, kitchen fitting, maintenance and snagging where you need drilling and driving covered in one hit. If you already know the separate bits you burn through most, have a look at Vaunt Drill Bits, Vaunt Screwdriver Bits & Bit Holders, Vaunt Screwdriver Bits, Vaunt Bit Holder Sets and the wider Vaunt Power Tool Accessories range, then pick the vaunt mixed bit set that matches how you actually work.
What Jobs Are Vaunt Bit Sets Best At?
- Fitting kitchens and bedrooms is easier with a vaunt drill screwdriver bit set because you can pilot, countersink where needed, then drive fixings without emptying half the toolbox on the floor.
- Working through first fix and second fix jobs, these sets cover the common screw head types and drilling sizes you reach for when hanging brackets, fixing battens and installing boxes.
- Snagging and maintenance calls suit a vaunt mixed bit set because it keeps the usual replacement bits together for loose hinges, cabinet adjustments, panel fixings and quick drill-through work.
- Loading the van with one vaunt storage bit set saves time on smaller jobs where you want drilling and screwdriving sorted in one case instead of carrying separate boxes for every task.
Choosing the Right Vaunt Bit Set
Match the set to the jobs you do every week, not the biggest case on the shelf.
1. Mixed Set or Specialist Set
If you bounce between drilling timber, fitting hardware and driving fixings all day, a vaunt mixed bit set makes more sense than separate packs. If you mostly burn through driver bits, go narrower and buy around the screw heads you actually use.
2. Piece Count
If the set lives in a van for daily site use, a bigger vaunt 50 piece bit set or vaunt 100 piece bit set gives you more repeat sizes and fewer wasted trips back for replacements. If it is just for punch-list jobs, a smaller set is easier to carry and keep tidy.
3. Storage Case Layout
Do not ignore the case. A proper vaunt storage bit set wants clear labelling and bits that come out without a fight. If the case is easy to sort back into, you are far more likely to keep it complete.
4. Drill and Driver Compatibility
If you are running standard drill chucks and quick-change bit holders, most sets will suit you fine. Just check shank type and holder fit before you buy, especially if you want one set to cover both combi drill and impact driver duties.
Who Uses These Bit Sets?
- Chippies keep a vaunt bit and driver set close for first fix studwork, door linings and second fix ironmongery, because the common drilling and driving sizes are all in one place.
- Sparkies use these sets for fixing back boxes, trunking, clips and boards, especially on jobs where a few pilot holes and several screw types turn up in the same room.
- Kitchen fitters and installers swear by a vaunt screwdriver bit set for cabinet assembly, hinge adjustment and appliance housing work, where losing time hunting a bit soon gets old.
- Maintenance teams and van-based trades reach for a vaunt mixed bit set on call-outs because it covers the usual fastening jobs without dragging a full accessory case through a building.
Accessories That Keep Your Bit Set Useful
A good set goes further when the bits are backed up with the bits of kit that stop hold-ups on site.
1. Magnetic Bit Holders
Get a decent holder and save yourself dropped screws, wobbly starts and that usual one-handed balancing act on ladders or inside cabinets. It is a small add-on that makes driver bits far more usable day to day.
2. Spare Driver Bit Packs
The bits you use most will always wear first. Keeping spare Pozi, Phillips or Torx bits means the set stays useful instead of turning into a box full of odd sizes you never touch.
3. Replacement Drill Bits
Pilot and clearance bits take a hammering on sheet material, softwood and repeated fitting work. Replacing the common diameters as they dull keeps fixings neat and stops the drill doing all the work.
Choose the Right Vaunt Bit Set for the Job
Use this quick guide to sort the right set for the work in front of you.
| Your Job | Category or Type | Key Features |
|---|---|---|
| Daily first fix and second fix work | Vaunt mixed bit set | Good spread of drill bits and driver bits, common fixing sizes, tidy case storage |
| Kitchen fitting and joinery installs | Vaunt drill screwdriver bit set | Pilot drilling and screwdriving in one set, quick access to Pozi and Torx, compact case |
| Van stock for maintenance call-outs | Vaunt storage bit set | Portable case, mixed bit coverage, easy to keep in the van for quick repairs |
| General site backup with more repeat sizes | Vaunt 50 piece bit set or 100 piece bit set | Broader selection, spare commonly used bits, better for regular use across different trades |
Common Buying and Usage Mistakes
- Buying on piece count alone is a classic mistake. A bigger set looks better value, but if it is packed with sizes and heads you never use, you still end up short on the bits that actually wear out.
- Using worn driver bits for too long chews screw heads and wastes time. Swap them out early and keep the fixings clean, especially on visible second fix work.
- Assuming every bit suits every tool causes grief. Check the shank and whether you are using a drill chuck or bit holder, otherwise the set will not work as neatly as you expect.
- Treating the case like a dumping ground means bits go missing fast. Put them back in the right slots and you will know straight away what needs replacing before the next job.
Mixed Bit Sets vs Driver Bit Sets vs Drill Bit Sets
Mixed Bit Sets
These are the best shout if you want one case to cover everyday drilling and fastening. They suit fitters, maintenance trades and anyone doing varied jobs where carrying separate sets just slows you down.
Driver Bit Sets
Best for trades who mostly drive fixings and rarely need to drill more than the odd pilot hole. You get more of the common heads and sizes, but you will still need separate drill bits in the bag.
Drill Bit Sets
These make sense when the drilling matters more than the fastening, such as pilot holes, clearance holes or material-specific work. They are not the answer if you also need to drive a range of screws on the same visit.
Maintenance and Care
Keep the Set Clean
Wipe dust, plaster and metal swarf off bits before they go back in the case. It stops the case filling with grit and makes it easier to spot chipped or worn tips.
Replace Worn Bits Early
Once driver bit tips start rounding off, bin them. Hanging on to a worn bit usually ends with cam-out, damaged screw heads and more force through the tool than you need.
Store It Dry
Do not leave the case sat wet in the van or on a damp floor. Dry storage helps prevent rust on the bits and stops the catch and hinges on the case getting clogged or stiff.
Check the Common Sizes
The sizes you use every day are the first to disappear or wear. Give the set a quick once-over before a job so you are not short on the bit you need most.
Why Shop for Vaunt Bit Sets at ITS?
Whether you need a compact vaunt screwdriver bit set for the van or a larger vaunt drill screwdriver bit set for daily fitting work, we stock the full spread of Vaunt bit sets in one place. That means mixed sets, storage sets and the common sizes trades actually buy, all held in our own warehouse and ready for next day delivery.
Vaunt Bit Set FAQs
What drill and screwdriver bit sets does Vaunt make?
Vaunt makes practical mixed sets that combine drill bits and screwdriver bits in one case, along with more focused sets for driving and general fitting work. The range is aimed at the everyday sizes and heads trades actually use rather than filling the box with pointless extras.
How many pieces are in a Vaunt bit set?
It depends on the set. You will find smaller grab-and-go options as well as larger layouts like a vaunt 50 piece bit set or vaunt 100 piece bit set. The main thing is not the headline number but whether it gives you enough repeats of the bits you wear out on site.
Are Vaunt bit sets suitable for all drills?
They suit most standard drills and drivers, but do not just assume every bit fits every tool. Check whether you are using a standard chuck or a quick-change holder, and make sure the shank and holder setup match the way you work.
What types of bits are included in a Vaunt bit set?
Most vaunt mixed bit set options include a spread of common drill bits plus the usual screwdriver heads such as Pozi, Phillips, slotted, hex or Torx depending on the set. The idea is to cover routine drilling and fastening jobs in timber, sheet material and general fitting work.
Will a Vaunt bit set hold up to daily site use?
Yes, for normal day-in day-out fitting and install work they are a sensible site set. Just be honest about the job. If you hammer the same sizes every day into tough material, expect those bits to wear first and keep replacements ready.
Is a bigger Vaunt bit set always the better buy?
No. A bigger case only makes sense if you need the wider spread or extra duplicates. For plenty of trades, a compact set with the right heads and sizes is quicker to carry, easier to keep complete and better value in real use.
