Nail Gun Accessories
Nail gun accessories keep your fixing kit running properly, from collated nails and gas to the bits you need for clean first fix and second fix work.
If the gun is sound but you've got the wrong nails, the wrong gas, or you've run out halfway through a fix, the job slows down fast. These nail gun accessories are what joiners, roofers, fitters, and framing crews rely on to keep first fix moving and second fix tidy. From Power Tool Accessories through to More Accessories, this is the gear that stops misfires, poor holding, and wasted time. If you already know the gun you're using, match the spec properly and get the right consumables on site.
What Are Nail Gun Accessories Used For?
- Fixing studwork, timber framing, battens, and sheathing on first fix jobs where the right collated nails keep the gun feeding cleanly and the work moving.
- Installing skirtings, architraves, trims, and other second fix details where finer nail gun nails and accessories leave a neater finish with less filling after.
- Keeping gas nailers working reliably on busy site days, especially when proper fuel cells and matching consumables stop weak firing and half-seated nails.
- Replacing worn or job-specific consumables so your nailer stays consistent instead of jamming, marking finished timber, or failing partway through a run.
- Stocking the van with the right nail gun accessories for tradesmen so you are not hunting for compatible nails when the first fix crew is waiting on you.
Choosing the Right Nail Gun Accessories
Sort the gun type first, then buy the consumables to match it. Guessing usually ends in jams, proud nails, or a wasted trip back to the van.
1. First Fix or Second Fix
If you are building studwork, roofing, or structural timber sections, go for first fix consumables with the holding power for rough timber and heavier jobs. If you are fitting trims, skirting, and finish joinery, use second fix nails that leave a cleaner, less obvious hole.
2. Match the Collation and Gauge
Do not assume all collated nails fit all nailers. If the angle, gauge, or collation type is wrong, the gun will not feed properly and you will spend more time clearing jams than fixing timber.
3. Pick the Right Length for the Material
If you are fixing sheet material or trims, do not overdo the nail length or you risk blow-through and split timber. For heavier framing and batten work, short nails are a false economy because they will not give you the hold you need.
4. Gas and Consumable Compatibility
For gas nailers, buy fuel and accessories that are made for your nailer platform. Weak or incompatible gas causes poor drive depth, especially in cold weather or when you are fixing into denser timber.
Who Uses These on Site?
- Chippies use nail gun accessories every day for stud walls, sheet timber, skirting, architrave, and repeat fixing work where hand nailing just wastes time.
- Roofers and timber frame crews swear by the right first fix consumables because a framing nailer is only as useful as the collated nails feeding through it.
- Kitchen fitters and second fix joiners keep finer nails and matching gas in the van for cleaner trim work that needs less making good at the end.
- Maintenance teams and site fitters use nail gun nails and accessories for repair work, snagging, and quick timber fixing where they need the gun to fire every time.
Nail Gun Accessories That Keep You Working
The right extras stop jams, weak firing, and mid-job hold-ups when you are trying to keep timber fixing moving.
1. Collated Nails
This is the obvious one, but it is also where lads get caught out. Keep the correct angle, gauge, and length for your gun, otherwise you end up with misfeeds, bent strips, and a nailer that spends more time open than firing.
2. Gas Fuel Cells
A fresh gas cell saves you from that sluggish firing you only notice once nails start sitting proud. If you use a gas nailer on first fix runs, keeping spare fuel on hand is just common sense.
3. Cleaning and Service Items
Dust, resin, and site muck build up quickly inside a nailer. Basic maintenance items help stop feed problems and keep the gun striking consistently instead of chewing through nails and your patience.
4. Carry Cases and Storage
Loose strips of nails and spare gas rolling about in the van get damaged fast. Proper storage keeps consumables dry, organised, and ready when you need to grab the gun and get on with it.
Choose the Right Nail Gun Accessories for the Job
Match the fixing to the gun and the timber, not just whatever is left in the van.
| Your Job | Nail Gun Accessories or Type | Key Features |
|---|---|---|
| Stud walls, timber framing, and battening | Framing Nails | Heavier duty collated nails with the length and hold needed for first fix timber work. |
| Skirting, architrave, trims, and finish carpentry | Finishing Nails | Finer fixings for second fix work where a cleaner finish and smaller hole matter. |
| Keeping a gas nailer firing on long site days | Nail Gun Gas & Accessories | Matching fuel and support items to maintain drive power and cut down on weak firing. |
| General restocking for mixed joinery and site fixing | Nail gun nails and accessories | A mix of first fix nails, second fix nails, and consumables matched to the nailers you already run. |
Common Buying and Usage Mistakes
- Buying nails by length alone is a common mistake. If the angle, gauge, or collation is wrong for the nail gun, it will feed badly or not at all, so always match the gun spec first.
- Using first fix nails for second fix joinery leaves a rougher finish and more filling to do. Keep heavier structural nails for framing work and finer nails for visible trim.
- Running old or nearly empty gas in a nailer leads to weak drives and proud nails. If the gun starts losing punch, swap the fuel before you blame the tool.
- Storing collated nails loose in a damp van can ruin the strips and affect feeding. Keep consumables dry and boxed so they go into the gun straight.
- Trying to make one nail type cover every job slows you down and spoils the finish. Stock the sizes and types you actually use for framing, sheeting, and finish work.
First Fix Nails vs Second Fix Nails vs Gas Accessories
First Fix Nails
These are for structural or rough timber work like studding, framing, battens, and sheeting. They are built for holding power and speed, not for leaving the prettiest finish on visible joinery.
Second Fix Nails
These suit skirting, architrave, trims, and finer carpentry where you want a smaller hole and less making good. They are not the right choice for heavier timber connections where grip matters more than appearance.
Gas Accessories
Gas does not replace the nails, but it matters just as much on gas nailers. If your fuel is wrong or running low, the gun will lose drive depth and consistency even if the nails themselves are spot on.
Maintenance and Care
Keep Nails Dry and Straight
Collated nails do not like damp vans or crushed boxes. Store them dry and flat so the strips stay intact and feed properly when you load the gun.
Clean the Nailer Regularly
Resin, dust, and clipped fragments soon build up around the feed path. A quick clean after heavy use helps stop jams and keeps firing consistent.
Do Not Hang On to Bad Gas
If fuel has been knocking about for ages or the gun starts firing weakly, change it out. Fresh gas is cheaper than wasting time pulling out proud nails and redoing work.
Check for Wear Before Big Runs
Before a full day on stud or batten work, check the magazine and feed parts are not worn or clogged. Catching a problem early is better than stripping the gun on the deck halfway through a run.
Why Shop for Nail Gun Accessories at ITS?
Whether you need collated nails for first fix, finer second fix consumables, or gas and support items to keep your nailer running, we stock the full range. ITS holds nail gun accessories, nail gun nails and accessories, and site-ready consumables in our own warehouse, ready for next day delivery across the UK.
Nail Gun Accessories FAQs
What are nail gun accessories used for?
They cover the consumables and support kit that keep a nailer working properly on site. That means collated nails for the job in hand, gas for compatible nailers, and other bits that help you fix timber quickly without constant jams or weak firing.
How do I choose the right nail gun accessories?
Start with the work, not the shelf. First fix jobs need heavier nails with proper hold, while second fix needs finer fixings for a cleaner finish. Then check the nailer spec so the angle, gauge, and fuel type all match what your gun actually takes.
How do I choose the right nail gun accessories for my nail gun?
Check the nailer manual or the markings on the gun for supported nail type, gauge, collation angle, and fuel compatibility. Be honest, close enough is not good enough here. The wrong spec usually means misfeeds, bent strips, or nails not driving home.
Are nail gun accessories suitable for first fix or second fix work?
Yes, but not all of them suit both. First fix nails are for structural timber, framing, and rough work where grip matters. Second fix nails are for trims and visible joinery where you want a cleaner finish and less filling afterwards.
Can I buy nail gun accessories online from ITS?
Yes. You can buy nail gun accessories online from ITS, including site staples like collated nails, first fix nails, second fix nails, and gas consumables, all backed by UK stock and next day delivery options.
Will all collated nails fit any nail gun?
No. This catches plenty of people out. Collation angle, nail gauge, head style, and strip format all matter, so always buy to the gun spec rather than assuming one strip is much like another.
