Timco Heavy Duty Flat Bent Strap - 500/100mm
(437174)£2.99
EX VAT
(£3.59 INC VAT)
Timco Heavy Duty Flat Bent Strap - 500/100mm
Key Features
- Factory-formed bent geometry (fixed angle) eliminates the need for on-site bending and preserves material strength
- Heavy duty construction using galvanised carbon steel for superior corrosion resistance
- Robust cross-sectional profile capable of handling significant structural loads
- Pre-drilled holes for accurate, fast fixing with standard bolts or screws
- Bent profile ensures neat alignment, better contact, and more uniform stress distribution under load
£2.99
EX VAT
-
Free Gift
-
Promotion:
-
Promotion:
-
Promotion:
-
Promotion:
-
Promotion:
-
Promotion:
Added for collection
Timco Heavy Duty Flat Bent Strap - 500/100mm
Description
-
Product Code:FIR600BRSH
-
Model Number: 600BRSH
-
Brand: Timco
-
Barcode: 5022456321466
-
Taxonomy: Hardware > Hardware Accessories > Hardware Fasteners
-
Category: Restraint Straps
When your structure demands both strength and alignment across offsets or angled junctions, the Timco 600BRSH Heavy Duty Flat Bent Strap from ITS is engineered to deliver.
This factory-bent strap removes the need for on-site bending - avoiding weak spots or distortion - and gives you a clean, accurate connection between timber and masonry in applications where a straight strap just won’t lie neatly.
Built from heavy duty galvanised carbon steel, the 600BRSH resists corrosion even in damp or semi-exposed environments, maintaining structural integrity over time and reducing maintenance concerns.
With its generous dimensions and bent design, this strap is ideal for when you need a robust, load-bearing restraint across non-planar interfaces - say, from a wall plate to a pivot point or across a corner junction.
The heavy duty cross-section means it can carry higher loads than light duty variants, making it a dependable choice for structural applications subject to lateral or vertical forces. Pre-drilled holes allow you to fix it precisely and quickly using standard bolts or screws, eliminating the hassle of measuring and drilling on the job.
Because the bent profile is factory formed, it ensures that contact surfaces remain flush and stresses are distributed more evenly, reducing the risk of twisting or buckling.
On site, you’ll appreciate the time saved and the reduced risk: no improvised bends, fewer adjustments, and less chance of weakening the strap.
The galvanised finish means long-term durability against corrosion, while the heavy duty build gives peace of mind under load.
For builders, roofers, carpenters or structural engineers needing a bent restraint component that’s both strong and built to fit, the 600BRSH is a versatile, long-lasting solution.
Specification
| Buying Option | Single |
| Pack Size | 1 |
| Product Weight | 0.48kg |
| Product Material | Carbon Steel |
| Product Length | 600mm |
| Finish | Galvanised |
| Suitable For | Roof Truss |
| Suitable For | Rafters |
| Suitable For | Timber Joists |
| Fixing Type | Restraint Strap |
Product is also in :
Customer Reviews
Ask a Question
Questions Answered
Key Features
- Factory-formed bent geometry (fixed angle) eliminates the need for on-site bending and preserves material strength
- Heavy duty construction using galvanised carbon steel for superior corrosion resistance
- Robust cross-sectional profile capable of handling significant structural loads
- Pre-drilled holes for accurate, fast fixing with standard bolts or screws
- Bent profile ensures neat alignment, better contact, and more uniform stress distribution under load
Description
Description
-
Product Code:FIR600BRSH
-
Model Number: 600BRSH
-
Brand: Timco
-
Barcode: 5022456321466
-
Taxonomy: Hardware > Hardware Accessories > Hardware Fasteners
-
Category: Restraint Straps
When your structure demands both strength and alignment across offsets or angled junctions, the Timco 600BRSH Heavy Duty Flat Bent Strap from ITS is engineered to deliver.
This factory-bent strap removes the need for on-site bending - avoiding weak spots or distortion - and gives you a clean, accurate connection between timber and masonry in applications where a straight strap just won’t lie neatly.
Built from heavy duty galvanised carbon steel, the 600BRSH resists corrosion even in damp or semi-exposed environments, maintaining structural integrity over time and reducing maintenance concerns.
With its generous dimensions and bent design, this strap is ideal for when you need a robust, load-bearing restraint across non-planar interfaces - say, from a wall plate to a pivot point or across a corner junction.
The heavy duty cross-section means it can carry higher loads than light duty variants, making it a dependable choice for structural applications subject to lateral or vertical forces. Pre-drilled holes allow you to fix it precisely and quickly using standard bolts or screws, eliminating the hassle of measuring and drilling on the job.
Because the bent profile is factory formed, it ensures that contact surfaces remain flush and stresses are distributed more evenly, reducing the risk of twisting or buckling.
On site, you’ll appreciate the time saved and the reduced risk: no improvised bends, fewer adjustments, and less chance of weakening the strap.
The galvanised finish means long-term durability against corrosion, while the heavy duty build gives peace of mind under load.
For builders, roofers, carpenters or structural engineers needing a bent restraint component that’s both strong and built to fit, the 600BRSH is a versatile, long-lasting solution.
Specification
- Buying Option Single
- Pack Size 1
- Product Weight 0.48kg
- Product Material Carbon Steel
- Product Length 600mm
- Finish Galvanised
- Suitable For Roof Truss
- Suitable For Rafters
- Suitable For Timber Joists
- Fixing Type Restraint Strap
Accessories you may need


