OX Tools Pro Hack Saws & Blades
OX Pro hacksaw kit is for cutting metal cleanly without fighting the frame or chewing through blades on first fix, snagging, conduit work and general site jobs.
If you're cutting threaded rod, trunking, conduit or small metal sections, a decent saw matters more than most lads think. OX Pro hacksaw frames and OX Pro hacksaw blades are built for site abuse, proper blade tension and cleaner cuts without the blade wandering. If you're tight on space, an OX Pro junior hacksaw earns its place in the bag. If you need other cutting kit nearby, look at OX Pro hand saws, OX Pro drywall saws, OX Pro bow saws and blades, OX Pro knives and blades and OX Pro tool bags to keep it all together. Pick the right frame and blade pitch for the work and get sorted.
What Are OX Pro Hacksaws Used For?
- Cutting threaded rod, bolts and metal fixings down to size on first fix jobs, where you need a straight cut without mangling the thread.
- Trimming conduit, trunking and light steel sections during electrical and mechanical installs, especially where a grinder would be overkill or throw too many sparks.
- Working in plant rooms, risers and under sinks with an OX Pro junior hacksaw, where a full-size frame is awkward and there is barely room for a full stroke.
- Handling snagging, maintenance and repair work where one solid OX Pro hacksaw frame with the right blade saves dragging powered kit in for a ten-second cut.
Choosing the Right OX Pro Hacksaw
Sorting the right one is simple: match the frame and blade pitch to the material, not just whatever is nearest in the van.
1. Full Size Frame or Junior Hacksaw
If you are cutting rod, conduit and section regularly, go with a full OX Pro hacksaw frame for better stroke length and straighter cuts. If you are mainly working in cupboards, service voids or under basins, an OX Pro junior hacksaw is the handier bit of kit.
2. Pick the Right TPI
If the metal is thicker, a lower TPI blade is usually the better shout because it clears the cut and does not clog as quickly. If you are cutting thinner wall tube or finer metal, go higher TPI so the blade does not snatch or strip teeth.
3. Blade Tension Matters
Do not overlook frame tension. If the frame cannot hold the blade properly tight, the blade wanders, twists and gives you a rough cut. A solid frame is worth paying for if it lives on site all week.
4. Buy Spare Blades at the Same Time
If the saw is for regular site use, grab extra OX Pro hacksaw blades there and then. Nothing wastes time faster than a blunt blade halfway through a bundle of rod with no replacement in the bag.
Who Uses These on Site?
- Sparkies use an OX Pro hack saw for conduit, trunking and threaded rod, especially on tidy install work where they want control and less mess than a cutting disc.
- Plumbers and heating engineers keep an OX Pro junior hacksaw close for copper, brackets and awkward cuts behind pipework where a bigger frame just will not fit.
- Dryliners, fitters and maintenance teams reach for OX Pro hacksaw blades when trimming metal studs, bolts and light channel during refurbs and snagging.
- General builders and site crews carry an OX Pro hacksaw frame as a no-fuss metal cutting saw for the jobs that crop up all week and do not justify powered kit.
Hacksaw Extras That Keep You Cutting
A hacksaw is simple kit, but the right extras stop hold-ups and make site cutting far less of a chore.
1. Spare Hacksaw Blades
This is the obvious one, but lads still get caught out. Keep spare OX Pro hacksaw blades in the van or tool bag so a dull or snapped blade does not stop the job halfway through rod, conduit or flat bar.
2. Junior Hacksaw Blades
If you carry a junior frame for tight spaces, stock the proper blades for it as well. It saves trying to force the wrong saw into cramped cupboards, risers and service gaps.
3. Tool Bag or Tote
A saw chucked loose in the van ends up bent, blunt or buried. A proper bag keeps the frame straight, the blades protected and your cutting kit easy to grab when you are moving between plots.
Choose the Right OX Pro Hacksaw for the Job
Use this quick guide to match the saw and blade to the work in front of you.
| Your Job | Category or Type | Key Features |
|---|---|---|
| Cutting threaded rod and bolts on general site work | Full size OX Pro hacksaw frame | Longer stroke, better tension, cleaner straight cuts and easier control on repeated cuts. |
| Working under sinks, in risers or behind pipework | OX Pro junior hacksaw | Compact frame, easier one handed positioning and far less faff in tight spaces. |
| Cutting thin wall conduit or smaller metal sections | Higher TPI hacksaw blade | Finer teeth help stop snagging and give a neater cut on lighter material. |
| Cutting thicker metal stock or solid bar | Lower TPI hacksaw blade | More tooth clearance, less clogging and steadier progress through heavier material. |
Common Buying and Usage Mistakes
- Buying on frame size alone and ignoring blade quality means the saw feels poor even if the frame looks decent. The fix is simple: treat the blade as half the tool and buy spare replacements with the saw.
- Using the wrong TPI on thin or thick metal leads to snagging, stripped teeth or painfully slow cuts. Match the blade pitch to the material instead of forcing one blade to do every job.
- Running the blade loose in the frame causes wandering cuts and twisted blades. Tension it properly before you start so the blade tracks straight.
- Trying to use a full-size hacksaw in cramped service spaces wastes time and skins knuckles. Keep a junior hacksaw handy for those awkward cuts where access is the real problem.
- Throwing spare blades loose in the van usually ends with rusted, bent or missing teeth before you need them. Store them dry and protected so they are actually usable on site.
Full Size Hacksaw vs Junior Hacksaw vs Powered Metal Cutting
Full Size Hacksaw
This is the best all-rounder for rod, conduit and regular site cutting. You get better leverage, a longer stroke and straighter cuts than a junior frame, without dragging out powered kit.
Junior Hacksaw
A junior hacksaw is for access, not speed. It comes into its own in cupboards, under basins and behind services, but it is slower going if you are cutting thicker stock all day.
Powered Metal Cutting
Grinders and powered saws are faster on bigger runs and heavier material, but they bring sparks, noise and more setup. For quick cuts, occupied buildings and simple snagging, a hacksaw is often the cleaner option.
Maintenance and Care
Keep the Frame Clean
Wipe swarf, dust and moisture off the frame after use, especially if it has been rattling round the van. It stops corrosion building up around the tension points and handle fixings.
Change Blades Early
If the blade starts skating, binding or taking far too long, swap it out. A blunt blade wastes more time and effort than the cost of a fresh one.
Check Blade Tension
Before each job, make sure the blade is seated properly and tightened evenly. A loose blade is hard on the frame and gives poor, crooked cuts.
Store Blades Dry
Keep spare blades in a dry pouch, case or bag rather than loose in the bottom of the van. It helps stop rust, chipped teeth and bent blades before they are even used.
Replace Bent Frames or Damaged Tensioners
If the frame is bent or the tensioner will not hold properly, do not keep fighting it. A damaged hacksaw never cuts right and usually burns through blades faster.
Why Shop for OX Pro Hacksaws at ITS?
Whether you need an OX Pro hacksaw frame, OX Pro hacksaw blades or a compact OX Pro junior hacksaw for tight spots, we stock the range in one place. It is all held in our own warehouse, ready for next day delivery, so you can get the right saw on site without hanging about.
OX Pro Hacksaw FAQs
What is a hacksaw used for?
A hacksaw is mainly used for cutting metal by hand. On site that usually means threaded rod, bolts, conduit, trunking, brackets and light steel sections. It is also handy where powered cutting would be too messy, too loud or likely to throw sparks where you do not want them.
What TPI hacksaw blade do I need?
It depends on the thickness of the material. Lower TPI suits thicker metal because it clears the cut better, while higher TPI is better on thinner wall metal and smaller sections where coarse teeth can snag. The simple rule is do not use one blade pitch for every job and expect clean results.
Are OX Pro hacksaws any good?
Yes, they are solid site tools if you want a proper frame that holds tension and stands up to being carried every day. The real advantage with OX Pro hacksaws is that they are built for trade use rather than occasional DIY cutting, so they cope better with repeated metal work and rougher handling.
How do you fit a hacksaw blade?
Slack off the frame tension, seat the blade fully into both mounting points, then tighten it until the blade is firm and straight in the frame. Make sure the teeth are facing the right way for the cut you want. If the blade is left loose, it will wander and twist almost straight away.
What is the difference between a hacksaw and a junior hacksaw?
A full-size hacksaw gives you a longer stroke, better leverage and faster cutting on general metal work. A junior hacksaw is smaller and easier to use in tight spaces, but it is slower and better suited to lighter jobs, short cuts and awkward access.
