OX Tools Pro Staple Guns
OX Pro staple gun kit is for fixing membrane, insulation, fabric and sheet material fast without faffing with pins that bend or pull loose.
If you're tacking breather membrane, pinning insulation, fixing weed control fabric or holding sheets in place before final fixing, an ox pro staple gun saves time and keeps the job moving. The OX Pro range is built for regular site use, with solid loading, decent grip and enough punch for repeat work. Match it with the right staples and buy for the material you're fixing, not just the lowest price.
What Jobs Are OX Pro Staple Guns Best At?
- Fixing breather membrane and damp proof sheet to timber framing is where an ox pro tacker earns its keep, especially when you need quick, repeat fastening without splitting thin battens.
- Tacking insulation, netting and light sheet materials in lofts, stud walls and sheds is much faster with an ox pro hand staple gun than trying to hold, pin and fix one-handed.
- Securing weed membrane and landscaping fabric during garden builds and external works helps stop materials shifting before edging, battens or final layers go down.
- Holding upholstery backing, protective covers and workshop materials in place suits an ox pro heavy duty staple gun when you want neat, consistent fixing without dragging out powered kit.
- Sorting quick temporary holds on boarding, packaging or site protection is exactly the kind of van-stock job where a staple gun gets used far more than most lads expect.
Choosing the Right OX Pro Staple Gun
Sorting the right one is simple: match it to the material and how often you will actually use it.
1. Light Coverings vs Repeated Site Use
If you only need to tack the odd sheet or fabric, a basic hand tacker will do. If you are fixing membrane, insulation or underlay day after day, buy the ox pro heavy duty staple gun so your hand is not shot by lunchtime.
2. Staple Compatibility Matters
Do not assume every staple fits every gun. Check the staple type, leg length and crown size first, then buy the gun and staples together so you are not standing on site with a tacker full of the wrong strips.
3. Soft Timber vs Harder Materials
If you are mostly working into softwood battens, lighter hand pressure is usually enough. If the timber is harder or the material stack is thicker, go for a model with proper driving force or you will end up with proud staples and torn material.
4. Keep It as Van Stock or Belt Kit
If this is a tool you grab for snagging and quick fixes, size and weight matter. For full days on membranes and coverings, comfort matters more than compact size, so pick the one that is easier to cycle all day.
Who Uses These on Site?
- Chippies use an ox pro staple gun for breather membrane, felt, thin sheet and temporary holds during first fix, especially when they need one hand free to keep material straight.
- Roofers and cladders reach for an ox pro tacker when fixing membranes and underlays to timber, because it is quicker than loose pins and far less fiddly in awkward positions.
- Landscapers use them for weed control fabric and light external sheeting, where fast fixing stops material lifting before the rest of the build is locked in.
- Workshop fitters and maintenance teams keep one in the van for repairs, coverings and quick securing jobs that do not justify dragging out a compressor or cordless nailer.
- If you are already carrying OX Pro tool belts, this is the sort of hand tool that gets used often enough to justify having close by rather than buried in the van.
OX Pro Staple Gun Accessories That Save Time
Get the basics right and your tacker stays useful instead of becoming another tool that sits in the van unloaded.
1. OX Pro Staples
Buy the correct ox pro staples at the same time as the gun. That saves the usual headache of finding out on site that the leg length is wrong or the strips will not feed properly.
2. Fixings and Fasteners
A staple gun is handy for quick holds, but plenty of jobs still need a proper final fixing. Keep OX Pro fixings and fasteners alongside it so temporary and permanent fixing are both covered.
3. Nail Pouches
When you are moving round a frame or roof, spare staple strips want to be on you, not back in the van. OX Pro nail pouches are a simple way to keep reloads handy.
Choose the Right OX Pro Staple Gun for the Job
Use this quick guide to avoid buying a tacker that is wrong for the material.
| Your Job | OX Pro Staple Gun Type | Key Features |
|---|---|---|
| Fixing membrane and felt to timber | Heavy duty hand staple gun | Stronger driving force, repeat action comfort, reliable loading for long runs |
| Tacking insulation and light sheet material | Standard hand tacker | Fast one handed use, enough punch for softwood, easy reloads |
| Landscaping fabric and site coverings | Heavy duty hand staple gun | Better hold through layered material, less chance of proud staples outdoors |
| Workshop repairs and occasional van jobs | Compact hand staple gun | Simple to store, quick to grab, good for light repeat fastening |
Common Buying and Usage Mistakes
- Buying the gun before checking staple size is the usual mistake. Get the staple type wrong and you will end up with jams, misfires or strips that will not load at all.
- Using a light duty tacker for thick membrane or harder timber wastes time and wrecks the finish. If staples are sitting proud, step up to a heavier duty model or shorten the fixing stack.
- Forcing the handle when the magazine is empty or jammed is a good way to damage the mechanism. Stop, clear it properly and reload rather than trying to bully it through.
- Choosing staples that are too long can blow through thin material or curl badly in hard timber. Match staple leg length to what you are actually fixing, not what happens to be in the van.
- Leaving loose staples and the gun rattling around in the van leads to bent strips and wasted reloads. Store them together so the tool is ready when you need it.
Hand Staple Guns vs Hammer Tackers vs Nailers
OX Pro Hand Staple Gun
Best when you need controlled, accurate fixing on membrane, insulation, fabric or thin sheet. Slower than a hammer tacker over big areas, but much neater and easier to place exactly where you want it.
Hammer Tacker
Better for covering large areas quickly, such as long membrane runs, where speed matters more than tidy placement. It is not the tool for careful detail work or tight corners.
Cordless or Pneumatic Nailer
Use a nailer when the fixing needs more holding power or the material is too heavy for staples alone. It costs more, takes up more room and is overkill for light coverings and temporary holds.
Maintenance and Care
Keep the Magazine Clean
Dust, grit and bent staple legs are what usually cause feeding trouble. Empty the gun now and then and wipe the magazine out before it starts jamming.
Store Staples Dry
Damp staples rust, stick together and feed badly. Keep strips in a dry box or pouch so they stay straight and usable.
Clear Jams Properly
Do not keep squeezing the handle when a staple has half fired. Open it up, remove the jammed staple safely and check the next strip is seated properly.
Watch for Wear on the Driver
If staples stop setting cleanly even with the right size loaded, the driving parts may be wearing. At that point, compare repair cost against replacing the gun if it is heavily used.
Do Not Leave It Loose in the Van
A staple gun bounced around with other metal tools soon gets knocked about. Keep it with your OX Pro hand tool kits or in a dedicated section so it stays ready to use.
Why Shop for OX Pro Staple Guns at ITS?
Whether you need an ox pro staple gun for the odd repair job or a heavier duty ox pro tacker for regular membrane and insulation work, we stock the range in one place. That means the right gun, the right staples and the right site kit, all held in our own warehouse and ready for next day delivery.
OX Pro Staple Gun FAQs
What is a staple gun used for?
An ox pro staple gun is used for fast fixing of membrane, insulation, fabric, felt, netting and other light sheet materials to timber. It is ideal where you need quick, repeat fixing without setting up powered kit or messing about with loose pins.
What staples fit an OX Pro staple gun?
The right staples depend on the exact OX Pro model, so always check the stated staple type, crown and leg length before buying. Do not guess. Buying an ox pro staple gun and staples together is the easiest way to avoid jams and wasted time on site.
Are OX Pro staple guns any good?
Yes, for regular trade use they are a solid choice. OX Pro kit is built with site work in mind, so you get a more durable body, dependable loading and better comfort than the throwaway tackers that end up frustrating you halfway through a job.
How do you load a staple gun?
Most hand staple guns load through the magazine at the bottom or rear. Release the magazine, drop in the correct strip of staples the right way round, then lock it back in place firmly. If it does not seat properly, do not force the handle. Check the staple size first.
What is the difference between a tacker and a staple gun?
On site, most lads use the terms to mean much the same thing. A tacker usually refers to a stapling tool used for quick fixing of membrane, felt or fabric, while staple gun is the broader name for the tool itself.
Will an ox pro hand staple gun fire into hard timber?
It will handle plenty of site timber, but be realistic. In harder timber or thicker material stacks, you need the right staple length and enough driving force. If staples are sitting proud, step up to a heavier duty model rather than blaming the staples.
