METABO HEAT GUNS
Metabo hot air gun kit is for stripping, shrinking, thawing and shaping jobs where steady heat matters more than guesswork on site or in the workshop.
When you're lifting old paint, shrinking sleeving or freeing off seized fittings, a metabo 2000w heat gun gives you proper control without cooking the job. Metabo kit is built for regular trade use, with sensible temperature settings, nozzle options and corded power that keeps going through snagging, refurb and workshop work. You can also see the wider Metabo More Power Tools range if you're building out your kit.
What Are Metabo Hot Air Guns Used For?
- Stripping old paint and softened coatings off doors, skirting and window boards is where a metabo paint stripper gun earns its keep, especially on refurb jobs where scraping by hand would take all day.
- Shrinking heat shrink sleeving around cable joints and terminations gives sparkies a clean, protected finish without scorching nearby materials when the heat gun temperature is set properly.
- Softening plastics, adhesives and sealants helps fitters and maintenance teams lift trims, loosen bonded parts and rework awkward sections without reaching straight for a blade.
- Thawing frozen pipework, locks and external fittings is a useful winter fix, giving controlled heat where an open flame would be a bad idea on occupied or finished properties.
- Drying damp patches, filler edges or cleaned surfaces speeds up small decorating and repair jobs, which is why these sit neatly alongside Metabo Decorating gear.
Choosing the Right Metabo Hot Air Gun
Sorting the right one is simple: match the heat control and accessories to the job, not just the wattage on the box.
1. Variable Temperature Matters
If you're only thawing fittings or doing rough strip-out, basic settings may do. If you're shrinking sleeving, working near finished surfaces or heating plastics, you want a metabo heat gun temperature range you can control properly so you do not scorch the work.
2. Corded for Long Jobs
A metabo 2000w heat gun is the sensible pick for bench work, decorating and longer site jobs because it gives you constant output without waiting on batteries. For this type of tool, plug-in power still makes the most sense when the heat needs to stay consistent.
3. Buy with the Right Nozzles
Do not ignore the nozzle kit. Metabo heat gun nozzles make a real difference if you're directing heat onto pipe, cable sleeving or narrow edges, and they stop you blasting half the surrounding area when all you need is one controlled spot.
4. Think About the Work Mix
If most of your jobs are decorating and prep, go for a model that suits paint removal and wide-area work. If you are doing electrical or maintenance tasks, prioritise fine control and the attachments that help on smaller, more precise jobs.
Who Uses These on Site?
- Decorators and refurb teams use a metabo hot air blower for stripping flaky paint, softening filler and getting surfaces ready without wrecking the timber underneath.
- Sparkies keep a metabo heat gun corded model in the van for heat shrink, cable sleeving and tidy termination work where a naked flame is asking for trouble.
- Plumbers and maintenance engineers reach for them to thaw frozen pipe runs, warm stubborn seals and loosen old bonded fittings during repair work.
- Workshop fitters and fabricators use the metabo hg 20 style of tool for shaping plastics, applying sleeves and controlled heating where you need both hands-on accuracy and repeatable results.
The Basics: Understanding Metabo Hot Air Guns
These tools do one simple job well: they push controlled hot air exactly where you need it. The important bit is understanding how heat level and airflow affect the finish.
1. Heat Softens, It Should Not Burn
A metabo hot air gun works by heating air and blowing it onto the job. On site, that means paint softens for scraping, sleeves shrink tight, and adhesives loosen up. Too much heat in one spot just scorches the surface, so control matters more than brute force.
2. Temperature Control Changes What You Can Tackle
Lower settings are better for gentle warming, drying and lighter plastics. Higher settings are what you use for tougher coatings, seized fittings and more stubborn materials. A good metabo heat gun 2000w model gives you enough range to cover both without swapping tools.
3. Nozzles Focus the Heat
The nozzle decides whether the heat is spread wide for paint stripping or narrowed down for pipework, cable work and detail jobs. That is why the right attachment saves time and stops damage around the area you are actually trying to heat.
Metabo Heat Gun Accessories That Make the Job Easier
The right extras make these far more useful on real work, especially when you need controlled heat instead of just waving hot air about.
1. Concentrator Nozzles
These tighten the airflow for shrinking sleeving, warming pipe sections and heating fixings in tight spots. Get one if you are sick of heating the whole area just to sort one small part.
2. Wide Slot Nozzles
A wider nozzle spreads heat more evenly when stripping paint or softening larger adhesive patches, which helps stop hot spots and saves you blistering one patch while the next bit stays cold.
3. Scrapers
If you are using a paint stripper gun, a decent scraper is half the job. It lets you lift softened paint while it is ready, instead of reheating the same section over and over.
4. Spare Power Lead Management and Storage Case
A proper case and tidy lead storage stop the cable getting kinked in the van and keep nozzles together. That saves you turning up ready for shrinking or stripping work with half the kit missing.
Choose the Right Metabo Hot Air Gun for the Job
Use this quick guide to sort the right setup before you buy.
| Your Job | Category or Type | Key Features |
|---|---|---|
| Stripping paint from timber and trim | Metabo 2000W heat gun with wide nozzle | Strong output, broad heat spread, comfortable handling for longer passes |
| Shrinking cable sleeving and electrical finishing | Variable temperature heat gun with concentrator nozzle | Controlled heat, focused airflow, less risk of scorching nearby parts |
| Thawing pipes, locks and frozen fittings | Corded Metabo hot air blower | Consistent heat, no battery drop-off, safer than open flame for many jobs |
| Softening adhesives and removing trims | Heat gun with adjustable settings | Gentler low heat options, better control on plastics and finished surfaces |
| Regular workshop and site maintenance work | Metabo HG 20 style all-rounder | 2000W class power, nozzle compatibility, suitable for repeat daily use |
Common Buying and Usage Mistakes
- Buying on wattage alone is a common one. A 2000W unit is useful, but if it lacks the temperature control or nozzle setup for your work, you will still struggle to get a clean finish.
- Using the wrong nozzle wastes time and can damage the job. A wide blast on cable sleeving or a tight spot nozzle on large paint areas just makes the work slower and messier.
- Holding the heat too close for too long is how you scorch timber, blister plastics or crack old filler. Keep the gun moving and let the heat do the work before you force it with the scraper.
- Treating a heat gun like a blowtorch is asking for trouble. These are for controlled hot air, not direct flame-style heating, so keep them away from materials that can ignite or off-gas badly.
- Forgetting the power setup catches plenty of people out. A metabo heat gun corded model needs a sensible extension lead and clear working area, otherwise you end up fighting the cable more than the job.
Variable Temperature vs Fixed Setting vs Nozzle Led Use
Variable Temperature
Best for mixed trade work where one day you are shrinking sleeving and the next you are stripping paint. It gives better control and less risk of burning finished surfaces, so it suits regular site and workshop use.
Fixed Setting
Fine if the work is basic and repetitive, but it is less forgiving. You get less flexibility on delicate materials and more chance of overcooking smaller jobs where lower heat would have done the trick.
Wide Nozzle Use
This setup is the better call for paint stripping, drying and warming larger sections. It covers more area evenly, but it is not what you want when the heat needs to stay tight and off the surrounding finish.
Concentrator Nozzle Use
This is the one for precision work on pipe, cable and small fittings. It focuses the heat exactly where you need it, though it is slower on broad surfaces and easier to scorch if you stay still too long.
Maintenance and Care
Keep the Air Intakes Clear
Dust and fluff around the intake make the tool run hotter than it should. Give it a quick check after messy stripping or workshop jobs so airflow stays proper.
Let It Cool Before Packing Away
Do not throw a hot gun straight into the case or van box. Let the nozzle cool first or you will damage the case, mark other kit and shorten the life of the tool.
Check the Lead Regularly
Because a metabo heat gun corded model gets moved around benches, floors and steps, the cable takes abuse. Replace damaged leads early rather than taping them up and hoping for the best.
Clean and Store Nozzles Together
Nozzles get clogged with softened paint, dust and site grime. Wipe them down once cool and keep them in the case so you are not hunting around the van when you need a specific shape.
Replace Worn Accessories Before the Next Job
Bent scrapers and damaged nozzles make the work rougher and slower. If the accessory is causing poor heat direction or dragging through softened paint, bin it and fit a fresh one.
Why Shop for Metabo Hot Air Guns at ITS?
Whether you need a metabo hot air gun for cable work, paint stripping or general maintenance, we stock the range that matters, including heat guns, attachments and the rest of the Metabo Power Tools lineup. It is all held in our own warehouse, ready for next day delivery, and you can also check Metabo Special Offers if you are pricing up the rest of your kit. If you are already on cordless Metabo gear, it is worth keeping your wider setup covered with Metabo Batteries & Chargers as well.
Metabo Heat Gun FAQs
How hot does a Metabo heat gun get?
On the higher settings, a Metabo heat gun gets properly hot enough for paint stripping, shrinking sleeving, loosening adhesives and thawing fittings. Exact top temperature depends on the model, but the 2000W class tools are built for real trade work rather than light craft use.
What can you use a heat gun for?
Mainly stripping paint, shrinking heat shrink, softening sealants and adhesives, thawing frozen pipework and warming plastics for shaping. It is one of those van tools that sorts lots of awkward little jobs, provided you use the right temperature and nozzle.
Do Metabo heat guns have variable temperature?
Many do, and it is worth having. Variable temperature gives you far more control for delicate surfaces, cable work and plastics, instead of blasting everything at one heat and hoping for the best.
What nozzles come with a Metabo heat gun?
That depends on the kit version. Some come as a bare heat gun, others include a small selection of nozzles for focused or wider airflow. If you know you are doing shrink work or paint stripping, check the box contents rather than assuming the right nozzle is included.
Can a heat gun be used to strip paint safely?
Yes, if you use it properly. Keep the gun moving, do not sit on one spot too long, and scrape once the paint softens rather than trying to blister it off. You also need to be sensible around old coatings, glass, dry timber and anything that could give off harmful fumes.
Is a corded Metabo heat gun better than cordless for most trade jobs?
For longer heating jobs, yes. A corded model gives steady output from start to finish, which matters when stripping paint or doing repeated workshop work. Cordless has its place, but for heat guns, most trades still prefer plug-in power for runtime and consistency.
Metabo Heat Guns
Metabo hot air gun kit is for stripping, shrinking, thawing and shaping jobs where steady heat matters more than guesswork on site or in the workshop.
When you're lifting old paint, shrinking sleeving or freeing off seized fittings, a metabo 2000w heat gun gives you proper control without cooking the job. Metabo kit is built for regular trade use, with sensible temperature settings, nozzle options and corded power that keeps going through snagging, refurb and workshop work. You can also see the wider Metabo More Power Tools range if you're building out your kit.
What Are Metabo Hot Air Guns Used For?
- Stripping old paint and softened coatings off doors, skirting and window boards is where a metabo paint stripper gun earns its keep, especially on refurb jobs where scraping by hand would take all day.
- Shrinking heat shrink sleeving around cable joints and terminations gives sparkies a clean, protected finish without scorching nearby materials when the heat gun temperature is set properly.
- Softening plastics, adhesives and sealants helps fitters and maintenance teams lift trims, loosen bonded parts and rework awkward sections without reaching straight for a blade.
- Thawing frozen pipework, locks and external fittings is a useful winter fix, giving controlled heat where an open flame would be a bad idea on occupied or finished properties.
- Drying damp patches, filler edges or cleaned surfaces speeds up small decorating and repair jobs, which is why these sit neatly alongside Metabo Decorating gear.
Choosing the Right Metabo Hot Air Gun
Sorting the right one is simple: match the heat control and accessories to the job, not just the wattage on the box.
1. Variable Temperature Matters
If you're only thawing fittings or doing rough strip-out, basic settings may do. If you're shrinking sleeving, working near finished surfaces or heating plastics, you want a metabo heat gun temperature range you can control properly so you do not scorch the work.
2. Corded for Long Jobs
A metabo 2000w heat gun is the sensible pick for bench work, decorating and longer site jobs because it gives you constant output without waiting on batteries. For this type of tool, plug-in power still makes the most sense when the heat needs to stay consistent.
3. Buy with the Right Nozzles
Do not ignore the nozzle kit. Metabo heat gun nozzles make a real difference if you're directing heat onto pipe, cable sleeving or narrow edges, and they stop you blasting half the surrounding area when all you need is one controlled spot.
4. Think About the Work Mix
If most of your jobs are decorating and prep, go for a model that suits paint removal and wide-area work. If you are doing electrical or maintenance tasks, prioritise fine control and the attachments that help on smaller, more precise jobs.
Who Uses These on Site?
- Decorators and refurb teams use a metabo hot air blower for stripping flaky paint, softening filler and getting surfaces ready without wrecking the timber underneath.
- Sparkies keep a metabo heat gun corded model in the van for heat shrink, cable sleeving and tidy termination work where a naked flame is asking for trouble.
- Plumbers and maintenance engineers reach for them to thaw frozen pipe runs, warm stubborn seals and loosen old bonded fittings during repair work.
- Workshop fitters and fabricators use the metabo hg 20 style of tool for shaping plastics, applying sleeves and controlled heating where you need both hands-on accuracy and repeatable results.
The Basics: Understanding Metabo Hot Air Guns
These tools do one simple job well: they push controlled hot air exactly where you need it. The important bit is understanding how heat level and airflow affect the finish.
1. Heat Softens, It Should Not Burn
A metabo hot air gun works by heating air and blowing it onto the job. On site, that means paint softens for scraping, sleeves shrink tight, and adhesives loosen up. Too much heat in one spot just scorches the surface, so control matters more than brute force.
2. Temperature Control Changes What You Can Tackle
Lower settings are better for gentle warming, drying and lighter plastics. Higher settings are what you use for tougher coatings, seized fittings and more stubborn materials. A good metabo heat gun 2000w model gives you enough range to cover both without swapping tools.
3. Nozzles Focus the Heat
The nozzle decides whether the heat is spread wide for paint stripping or narrowed down for pipework, cable work and detail jobs. That is why the right attachment saves time and stops damage around the area you are actually trying to heat.
Metabo Heat Gun Accessories That Make the Job Easier
The right extras make these far more useful on real work, especially when you need controlled heat instead of just waving hot air about.
1. Concentrator Nozzles
These tighten the airflow for shrinking sleeving, warming pipe sections and heating fixings in tight spots. Get one if you are sick of heating the whole area just to sort one small part.
2. Wide Slot Nozzles
A wider nozzle spreads heat more evenly when stripping paint or softening larger adhesive patches, which helps stop hot spots and saves you blistering one patch while the next bit stays cold.
3. Scrapers
If you are using a paint stripper gun, a decent scraper is half the job. It lets you lift softened paint while it is ready, instead of reheating the same section over and over.
4. Spare Power Lead Management and Storage Case
A proper case and tidy lead storage stop the cable getting kinked in the van and keep nozzles together. That saves you turning up ready for shrinking or stripping work with half the kit missing.
Choose the Right Metabo Hot Air Gun for the Job
Use this quick guide to sort the right setup before you buy.
| Your Job | Category or Type | Key Features |
|---|---|---|
| Stripping paint from timber and trim | Metabo 2000W heat gun with wide nozzle | Strong output, broad heat spread, comfortable handling for longer passes |
| Shrinking cable sleeving and electrical finishing | Variable temperature heat gun with concentrator nozzle | Controlled heat, focused airflow, less risk of scorching nearby parts |
| Thawing pipes, locks and frozen fittings | Corded Metabo hot air blower | Consistent heat, no battery drop-off, safer than open flame for many jobs |
| Softening adhesives and removing trims | Heat gun with adjustable settings | Gentler low heat options, better control on plastics and finished surfaces |
| Regular workshop and site maintenance work | Metabo HG 20 style all-rounder | 2000W class power, nozzle compatibility, suitable for repeat daily use |
Common Buying and Usage Mistakes
- Buying on wattage alone is a common one. A 2000W unit is useful, but if it lacks the temperature control or nozzle setup for your work, you will still struggle to get a clean finish.
- Using the wrong nozzle wastes time and can damage the job. A wide blast on cable sleeving or a tight spot nozzle on large paint areas just makes the work slower and messier.
- Holding the heat too close for too long is how you scorch timber, blister plastics or crack old filler. Keep the gun moving and let the heat do the work before you force it with the scraper.
- Treating a heat gun like a blowtorch is asking for trouble. These are for controlled hot air, not direct flame-style heating, so keep them away from materials that can ignite or off-gas badly.
- Forgetting the power setup catches plenty of people out. A metabo heat gun corded model needs a sensible extension lead and clear working area, otherwise you end up fighting the cable more than the job.
Variable Temperature vs Fixed Setting vs Nozzle Led Use
Variable Temperature
Best for mixed trade work where one day you are shrinking sleeving and the next you are stripping paint. It gives better control and less risk of burning finished surfaces, so it suits regular site and workshop use.
Fixed Setting
Fine if the work is basic and repetitive, but it is less forgiving. You get less flexibility on delicate materials and more chance of overcooking smaller jobs where lower heat would have done the trick.
Wide Nozzle Use
This setup is the better call for paint stripping, drying and warming larger sections. It covers more area evenly, but it is not what you want when the heat needs to stay tight and off the surrounding finish.
Concentrator Nozzle Use
This is the one for precision work on pipe, cable and small fittings. It focuses the heat exactly where you need it, though it is slower on broad surfaces and easier to scorch if you stay still too long.
Maintenance and Care
Keep the Air Intakes Clear
Dust and fluff around the intake make the tool run hotter than it should. Give it a quick check after messy stripping or workshop jobs so airflow stays proper.
Let It Cool Before Packing Away
Do not throw a hot gun straight into the case or van box. Let the nozzle cool first or you will damage the case, mark other kit and shorten the life of the tool.
Check the Lead Regularly
Because a metabo heat gun corded model gets moved around benches, floors and steps, the cable takes abuse. Replace damaged leads early rather than taping them up and hoping for the best.
Clean and Store Nozzles Together
Nozzles get clogged with softened paint, dust and site grime. Wipe them down once cool and keep them in the case so you are not hunting around the van when you need a specific shape.
Replace Worn Accessories Before the Next Job
Bent scrapers and damaged nozzles make the work rougher and slower. If the accessory is causing poor heat direction or dragging through softened paint, bin it and fit a fresh one.
Why Shop for Metabo Hot Air Guns at ITS?
Whether you need a metabo hot air gun for cable work, paint stripping or general maintenance, we stock the range that matters, including heat guns, attachments and the rest of the Metabo Power Tools lineup. It is all held in our own warehouse, ready for next day delivery, and you can also check Metabo Special Offers if you are pricing up the rest of your kit. If you are already on cordless Metabo gear, it is worth keeping your wider setup covered with Metabo Batteries & Chargers as well.
Metabo Heat Gun FAQs
How hot does a Metabo heat gun get?
On the higher settings, a Metabo heat gun gets properly hot enough for paint stripping, shrinking sleeving, loosening adhesives and thawing fittings. Exact top temperature depends on the model, but the 2000W class tools are built for real trade work rather than light craft use.
What can you use a heat gun for?
Mainly stripping paint, shrinking heat shrink, softening sealants and adhesives, thawing frozen pipework and warming plastics for shaping. It is one of those van tools that sorts lots of awkward little jobs, provided you use the right temperature and nozzle.
Do Metabo heat guns have variable temperature?
Many do, and it is worth having. Variable temperature gives you far more control for delicate surfaces, cable work and plastics, instead of blasting everything at one heat and hoping for the best.
What nozzles come with a Metabo heat gun?
That depends on the kit version. Some come as a bare heat gun, others include a small selection of nozzles for focused or wider airflow. If you know you are doing shrink work or paint stripping, check the box contents rather than assuming the right nozzle is included.
Can a heat gun be used to strip paint safely?
Yes, if you use it properly. Keep the gun moving, do not sit on one spot too long, and scrape once the paint softens rather than trying to blister it off. You also need to be sensible around old coatings, glass, dry timber and anything that could give off harmful fumes.
Is a corded Metabo heat gun better than cordless for most trade jobs?
For longer heating jobs, yes. A corded model gives steady output from start to finish, which matters when stripping paint or doing repeated workshop work. Cordless has its place, but for heat guns, most trades still prefer plug-in power for runtime and consistency.
Our Stores
| Opening times |
|---|
