METABO CHARGERS
Metabo ASC charger options keep 18V and 36V batteries turning round fast, so the tool's ready when you are and not sat dead on the floor.
If you're running cordless kit all day, a proper Metabo fast charger saves waiting about between cuts, fixings and holes. From the ASC 55 for steady everyday charging to the ASC 145 for quicker turnaround on bigger packs, these Metabo charger 18V and 36V options suit vans, workshops and busy site use. If you already rely on Metabo Power Tools, this is the bit that keeps the whole system moving.
What Are Metabo ASC Chargers Used For?
- Keeping 18V drills, impact drivers and saws working through first fix by charging spare packs while the next battery is already in the tool.
- Turning round larger LiHD batteries on heavier jobs where grinders, combi hammers and cut-off tools drain packs quickly and downtime costs you time.
- Charging 36V batteries for higher-draw kit when you're on outdoor work, steelwork, or concrete jobs and need proper cordless runtime back fast.
- Running a van or workshop charging point so batteries are topped up overnight and ready before you even pull up on site in the morning.
- Supporting mixed cordless setups under the CAS system where one Metabo air cooled charger can handle compatible packs used across more than one bit of kit.
Choosing the Right Metabo Charger
Sorting the right one is simple: match the charger speed to how hard your batteries get worked, not just the cheapest unit on the page.
1. Everyday Charging vs Fast Turnaround
If you charge overnight or between small jobs, the Metabo ASC 55 is usually plenty. If you are cycling batteries all day on site and cannot afford to wait, go for a Metabo rapid charger like the ASC 145.
2. Battery Size Matters
Small compact packs are one thing, but bigger LiHD batteries take more filling. If most of your kit runs on higher-capacity packs for grinders, SDS drills or saws, a quicker charger makes far more sense.
3. 18V and 36V Use
Check what batteries you actually run day to day. If your setup includes both Metabo charger 18V needs and larger 36V packs, buy a charger that covers the full range so you are not doubling up later.
4. Single Bay or Twin Charging
If you only ever rotate one or two packs, a single charger is fine. If two lads are sharing cordless gear or you keep several batteries moving, a Metabo twin charger can save arguments and dead time.
Who Uses These Chargers?
- Sparkies use a Metabo battery charger 18V to keep combis, impacts and lights going through long first-fix days without waiting on flat packs.
- Chippies and fitters keep an ASC charger in the van or workshop so saw, drill and multi-tool batteries are back up while they are setting out or moving on to the next room.
- Metalworkers and fabricators lean towards the quicker units, especially when grinders and heavier cordless kit chew through LiHD batteries faster than lighter tools do.
- Maintenance teams and site managers like charger only options as spares for the cabin, stores or van, so batteries are always on rotation and not all fighting for one lead.
The Basics: Understanding Metabo Chargers
The main thing to understand is not just whether the battery fits, but how quickly the charger can get it back to usable level and what battery types it is built to handle.
1. Charge Rate
The difference between models like the Metabo ASC 55 and Metabo ASC 145 is charge speed. A faster unit gets bigger packs back into service sooner, which matters when the tool is earning all day.
2. Air Cooled Charging
A Metabo air cooled charger helps manage battery temperature while charging. That is useful on hard-worked packs, especially after hot weather, heavy cutting or repeated grinder use.
3. Li-Power and LiHD Compatibility
Most buyers need a charger that works across standard Li-Power and larger LiHD batteries. That gives you one charging setup for lighter drill-driver work and higher-draw cordless tools.
Bits That Make Metabo Chargers More Useful
A charger is only half the story. The right extras stop you waiting on dead packs or juggling one battery between too many tools.
1. Spare Batteries
A second or third pack is the obvious one. One in the tool, one on charge, one ready to go means you keep working instead of standing about watching lights flash. See the full Metabo Batteries range if your current setup is too tight.
2. Additional Charger for Van or Workshop
Keeping one charger in the van and one in the workshop saves the usual mess of forgotten leads and flat batteries. It is a simple fix if your tools start early and finish late.
3. Cordless Kits with Charger Included
If you are building out your setup, some Metabo Cordless Kits include batteries and a charger from the off. That often works out better than buying a bare tool, then realising you still need the charging side sorted.
Choose the Right Metabo Charger for the Job
Use this quick guide to match charging speed to the way you actually work.
| Your Job | Charger or Type | Key Features |
|---|---|---|
| General van stock and overnight charging | ASC 55 | Solid everyday charge rate, suits regular 18V use, good for one-man setups. |
| Busy site work with constant battery rotation | ASC 145 | Faster turnaround, better for larger packs, keeps downtime down on heavy use. |
| High-draw grinders, saws and SDS tools | LiHD-ready fast charger | Built for bigger batteries, air cooled charging, better for repeated hard cycles. |
| Mixed 18V and 36V cordless setup | Multi-voltage compatible charger | Covers more of the battery range, cuts clutter, one charger for more tools. |
| Shared batteries between two users or teams | Twin charger | Charges more than one pack in rotation, handy for workshop benches and site cabins. |
Common Buying and Usage Mistakes
- Buying on price alone and ignoring charge speed usually means bigger batteries sit too long on the bench. If you use LiHD packs hard, step up to a faster charger.
- Running one charger for too many batteries slows the whole job down. The fix is simple. Add another charger or more packs so the rotation actually works.
- Not checking battery compatibility before ordering can leave you with a charger that does not suit the packs you use most. Always match it to your 18V, 36V and battery type requirements.
- Throwing hot batteries straight on charge after heavy use is hard on packs. Let them cool naturally first, then charge them properly.
- Leaving chargers buried under dust, fixings and offcuts shortens their life. Keep the vents clear and the bench tidy so the charger can do its job.
ASC 55 vs ASC 145 vs Twin Chargers
ASC 55
The ASC 55 suits steady everyday use where batteries can charge between jobs or overnight. It is the sensible choice for lighter cordless setups and single-user vans.
ASC 145
The ASC 145 is the better shout when larger packs are in constant use. It cuts waiting time and makes more sense for trades relying on grinders, saws and other heavier cordless tools.
Twin Chargers
Twin chargers are about battery flow, not just speed. If several packs are always in circulation or more than one person is sharing gear, charging two at once keeps the bench moving.
Maintenance and Care
Keep the Vents Clear
Chargers need airflow to do their job properly. Brush off dust and do not bury them under rags, packaging or offcuts on the bench.
Store Them Dry
Van floors and damp cabins are no place for chargers. Keep them dry and off the deck to avoid damaged leads, dirty contacts and needless faults.
Check Leads and Plugs
If the cable gets trapped in van doors or crushed under boxes, replace it before it becomes a proper problem. A charger is no use if the lead is hanging by a thread.
Clean Battery Contacts
Dirty contacts can stop proper charging or make the battery sit badly. Wipe them clean now and then, especially if your kit lives in dusty cutting areas.
Replace Worn Chargers Before They Waste Time
If a charger is inconsistent, overheating or taking far longer than it should, do not keep trusting it. Replacing a tired unit is cheaper than losing half a day to flat batteries.
Why Shop for Metabo Chargers at ITS?
Whether you need a straightforward Metabo charger only, a Metabo fast charger for LiHD packs, or a full charging setup from the wider Metabo Batteries & Chargers range, we stock the lot. It is all in our own warehouse and ready for next day delivery, so you can get your cordless kit back in rotation without hanging about. Keep an eye on Metabo Special Offers as well if you are adding chargers, batteries or extra kit in one go.
Metabo Charger FAQs
Which Metabo charger is fastest?
Out of the common ASC options, the ASC 145 is the quicker choice than the ASC 55, especially with larger LiHD packs. If you are hammering cordless tools all day and need batteries back in service sharpish, that is the one worth looking at first.
Can a Metabo charger charge LiHD and Li-Power batteries?
Yes, the right Metabo charger is built to handle both LiHD and Li-Power batteries. That is one of the main reasons trades stick with the system, as you can run lighter packs for drills and larger packs for grinders or saws without needing separate chargers.
What is the difference between the ASC 55 and ASC 145?
The main difference is charge speed. The ASC 55 is a solid everyday charger for regular rotation and overnight charging, while the ASC 145 is faster and better suited to bigger batteries or harder use where downtime becomes a problem.
Will a Metabo charger charge other CAS brand batteries?
In many cases, yes, if the battery is part of the CAS cordless alliance and the charger is specified as compatible. Still check the exact battery and charger details before you buy, because assuming all packs cross over without checking is how mistakes happen.
Can you leave a Metabo battery on charge?
Modern chargers are designed to manage the charge properly, but it is still better practice not to leave batteries sitting on the charger for ages for no reason. Charge them, take them off, and store them somewhere dry and out of extreme heat or cold.
Will these chargers handle 36V batteries as well as 18V ones?
Some Metabo chargers are suitable for both 18V and 36V packs, but not every unit should be assumed to cover everything. Check the charger spec against the batteries you already own, especially if you run higher-capacity packs on heavier cordless tools.
Metabo Chargers
Metabo ASC charger options keep 18V and 36V batteries turning round fast, so the tool's ready when you are and not sat dead on the floor.
If you're running cordless kit all day, a proper Metabo fast charger saves waiting about between cuts, fixings and holes. From the ASC 55 for steady everyday charging to the ASC 145 for quicker turnaround on bigger packs, these Metabo charger 18V and 36V options suit vans, workshops and busy site use. If you already rely on Metabo Power Tools, this is the bit that keeps the whole system moving.
What Are Metabo ASC Chargers Used For?
- Keeping 18V drills, impact drivers and saws working through first fix by charging spare packs while the next battery is already in the tool.
- Turning round larger LiHD batteries on heavier jobs where grinders, combi hammers and cut-off tools drain packs quickly and downtime costs you time.
- Charging 36V batteries for higher-draw kit when you're on outdoor work, steelwork, or concrete jobs and need proper cordless runtime back fast.
- Running a van or workshop charging point so batteries are topped up overnight and ready before you even pull up on site in the morning.
- Supporting mixed cordless setups under the CAS system where one Metabo air cooled charger can handle compatible packs used across more than one bit of kit.
Choosing the Right Metabo Charger
Sorting the right one is simple: match the charger speed to how hard your batteries get worked, not just the cheapest unit on the page.
1. Everyday Charging vs Fast Turnaround
If you charge overnight or between small jobs, the Metabo ASC 55 is usually plenty. If you are cycling batteries all day on site and cannot afford to wait, go for a Metabo rapid charger like the ASC 145.
2. Battery Size Matters
Small compact packs are one thing, but bigger LiHD batteries take more filling. If most of your kit runs on higher-capacity packs for grinders, SDS drills or saws, a quicker charger makes far more sense.
3. 18V and 36V Use
Check what batteries you actually run day to day. If your setup includes both Metabo charger 18V needs and larger 36V packs, buy a charger that covers the full range so you are not doubling up later.
4. Single Bay or Twin Charging
If you only ever rotate one or two packs, a single charger is fine. If two lads are sharing cordless gear or you keep several batteries moving, a Metabo twin charger can save arguments and dead time.
Who Uses These Chargers?
- Sparkies use a Metabo battery charger 18V to keep combis, impacts and lights going through long first-fix days without waiting on flat packs.
- Chippies and fitters keep an ASC charger in the van or workshop so saw, drill and multi-tool batteries are back up while they are setting out or moving on to the next room.
- Metalworkers and fabricators lean towards the quicker units, especially when grinders and heavier cordless kit chew through LiHD batteries faster than lighter tools do.
- Maintenance teams and site managers like charger only options as spares for the cabin, stores or van, so batteries are always on rotation and not all fighting for one lead.
The Basics: Understanding Metabo Chargers
The main thing to understand is not just whether the battery fits, but how quickly the charger can get it back to usable level and what battery types it is built to handle.
1. Charge Rate
The difference between models like the Metabo ASC 55 and Metabo ASC 145 is charge speed. A faster unit gets bigger packs back into service sooner, which matters when the tool is earning all day.
2. Air Cooled Charging
A Metabo air cooled charger helps manage battery temperature while charging. That is useful on hard-worked packs, especially after hot weather, heavy cutting or repeated grinder use.
3. Li-Power and LiHD Compatibility
Most buyers need a charger that works across standard Li-Power and larger LiHD batteries. That gives you one charging setup for lighter drill-driver work and higher-draw cordless tools.
Bits That Make Metabo Chargers More Useful
A charger is only half the story. The right extras stop you waiting on dead packs or juggling one battery between too many tools.
1. Spare Batteries
A second or third pack is the obvious one. One in the tool, one on charge, one ready to go means you keep working instead of standing about watching lights flash. See the full Metabo Batteries range if your current setup is too tight.
2. Additional Charger for Van or Workshop
Keeping one charger in the van and one in the workshop saves the usual mess of forgotten leads and flat batteries. It is a simple fix if your tools start early and finish late.
3. Cordless Kits with Charger Included
If you are building out your setup, some Metabo Cordless Kits include batteries and a charger from the off. That often works out better than buying a bare tool, then realising you still need the charging side sorted.
Choose the Right Metabo Charger for the Job
Use this quick guide to match charging speed to the way you actually work.
| Your Job | Charger or Type | Key Features |
|---|---|---|
| General van stock and overnight charging | ASC 55 | Solid everyday charge rate, suits regular 18V use, good for one-man setups. |
| Busy site work with constant battery rotation | ASC 145 | Faster turnaround, better for larger packs, keeps downtime down on heavy use. |
| High-draw grinders, saws and SDS tools | LiHD-ready fast charger | Built for bigger batteries, air cooled charging, better for repeated hard cycles. |
| Mixed 18V and 36V cordless setup | Multi-voltage compatible charger | Covers more of the battery range, cuts clutter, one charger for more tools. |
| Shared batteries between two users or teams | Twin charger | Charges more than one pack in rotation, handy for workshop benches and site cabins. |
Common Buying and Usage Mistakes
- Buying on price alone and ignoring charge speed usually means bigger batteries sit too long on the bench. If you use LiHD packs hard, step up to a faster charger.
- Running one charger for too many batteries slows the whole job down. The fix is simple. Add another charger or more packs so the rotation actually works.
- Not checking battery compatibility before ordering can leave you with a charger that does not suit the packs you use most. Always match it to your 18V, 36V and battery type requirements.
- Throwing hot batteries straight on charge after heavy use is hard on packs. Let them cool naturally first, then charge them properly.
- Leaving chargers buried under dust, fixings and offcuts shortens their life. Keep the vents clear and the bench tidy so the charger can do its job.
ASC 55 vs ASC 145 vs Twin Chargers
ASC 55
The ASC 55 suits steady everyday use where batteries can charge between jobs or overnight. It is the sensible choice for lighter cordless setups and single-user vans.
ASC 145
The ASC 145 is the better shout when larger packs are in constant use. It cuts waiting time and makes more sense for trades relying on grinders, saws and other heavier cordless tools.
Twin Chargers
Twin chargers are about battery flow, not just speed. If several packs are always in circulation or more than one person is sharing gear, charging two at once keeps the bench moving.
Maintenance and Care
Keep the Vents Clear
Chargers need airflow to do their job properly. Brush off dust and do not bury them under rags, packaging or offcuts on the bench.
Store Them Dry
Van floors and damp cabins are no place for chargers. Keep them dry and off the deck to avoid damaged leads, dirty contacts and needless faults.
Check Leads and Plugs
If the cable gets trapped in van doors or crushed under boxes, replace it before it becomes a proper problem. A charger is no use if the lead is hanging by a thread.
Clean Battery Contacts
Dirty contacts can stop proper charging or make the battery sit badly. Wipe them clean now and then, especially if your kit lives in dusty cutting areas.
Replace Worn Chargers Before They Waste Time
If a charger is inconsistent, overheating or taking far longer than it should, do not keep trusting it. Replacing a tired unit is cheaper than losing half a day to flat batteries.
Why Shop for Metabo Chargers at ITS?
Whether you need a straightforward Metabo charger only, a Metabo fast charger for LiHD packs, or a full charging setup from the wider Metabo Batteries & Chargers range, we stock the lot. It is all in our own warehouse and ready for next day delivery, so you can get your cordless kit back in rotation without hanging about. Keep an eye on Metabo Special Offers as well if you are adding chargers, batteries or extra kit in one go.
Metabo Charger FAQs
Which Metabo charger is fastest?
Out of the common ASC options, the ASC 145 is the quicker choice than the ASC 55, especially with larger LiHD packs. If you are hammering cordless tools all day and need batteries back in service sharpish, that is the one worth looking at first.
Can a Metabo charger charge LiHD and Li-Power batteries?
Yes, the right Metabo charger is built to handle both LiHD and Li-Power batteries. That is one of the main reasons trades stick with the system, as you can run lighter packs for drills and larger packs for grinders or saws without needing separate chargers.
What is the difference between the ASC 55 and ASC 145?
The main difference is charge speed. The ASC 55 is a solid everyday charger for regular rotation and overnight charging, while the ASC 145 is faster and better suited to bigger batteries or harder use where downtime becomes a problem.
Will a Metabo charger charge other CAS brand batteries?
In many cases, yes, if the battery is part of the CAS cordless alliance and the charger is specified as compatible. Still check the exact battery and charger details before you buy, because assuming all packs cross over without checking is how mistakes happen.
Can you leave a Metabo battery on charge?
Modern chargers are designed to manage the charge properly, but it is still better practice not to leave batteries sitting on the charger for ages for no reason. Charge them, take them off, and store them somewhere dry and out of extreme heat or cold.
Will these chargers handle 36V batteries as well as 18V ones?
Some Metabo chargers are suitable for both 18V and 36V packs, but not every unit should be assumed to cover everything. Check the charger spec against the batteries you already own, especially if you run higher-capacity packs on heavier cordless tools.
Our Stores
| Opening times |
|---|
