Makita Screwguns & Screwdrivers
A Makita screw gun is made for fast, tidy plasterboard fixing without wrecking heads or wrists, from single-sheet work to full runs with collated screws.
When you're hanging board all day, a proper Makita drywall screw gun saves time and keeps the finish clean. You get consistent depth control so screws don't tear paper, plus the speed to keep up on big ceilings and partitions. Choose a Makita collated screw gun if you're doing volume work, and match it to your 18V platform so batteries and chargers stay simple.
What Are Makita Screw Guns Used For?
- Fixing plasterboard to timber or metal stud where you need repeatable depth so the screw head sits right without blowing through the paper.
- Running long ceiling and partition lines faster with a Makita collated screw gun, so you are not constantly stopping to pick up loose screws with dusty hands.
- Second-fix and fit-out work where a Makita cordless screwdriver gives you controlled driving in tight corners without over-torquing small fixings.
- Refurbs and patching where a Makita plasterboard gun lets you sink screws cleanly, then get straight onto taping and filling with less snagging back.
- High-volume board days where an auto feed screw gun keeps the pace up and reduces wrist strain compared with a standard impact driver.
Choosing the Right Makita Screw Gun
Sorting the right Makita screwgun is simple: match it to how much board you hang and how fussy the finish needs to be.
1. Collated vs Loose Screws
If you are doing full rooms, ceilings, or long runs, get a Makita collated screw gun so you keep moving and keep one hand on the board. If it is only the odd patch or small job, a standard Makita drywall screwdriver is usually enough without the extra bulk.
2. 18V Platform and Body Only
If you are already on Makita LXT, a Makita screw gun 18V makes the most sense because batteries rotate with your drills and saws. If you have chargers and batteries already, body only is the sensible buy for site teams.
3. Depth Control and Nose Design
For plasterboard, proper depth adjustment is not optional because it stops you tearing the face paper and having to fill blow-outs. If you are working close to corners and returns, look for a nose that seats cleanly without fighting you on awkward angles.
4. Brushless for All-Day Runs
If you are on the gun every day, go brushless because it runs cooler and tends to give better battery life under constant driving. If it is occasional boarding, brushed can still do the job, but expect more heat and more battery swaps.
Makita Screw Gun FAQs
Do I really need a drywall screw gun?
If you are hanging plasterboard properly, yes, it is worth it. A Makita drywall screw gun gives repeatable depth so you stop blowing through the paper and spending time fixing it later, and it is quicker and less fatiguing than trying to do the same job with an impact driver.
What is the real advantage of a Makita collated screw gun?
Speed and flow. With collated strips you are not grabbing loose screws every few seconds, so you keep one hand on the board and you keep moving, which matters most on ceilings and big partition runs.
Will a Makita screw gun 18V handle full-day boarding, or will it chew batteries?
It will do full days, but battery planning matters. If you are driving continuously, keep at least one spare charged pack on rotation, because stopping to wait for a battery is what kills productivity on board work.
Can I use a Makita drywall screw gun on timber and metal stud?
Yes, as long as you use the correct screws for the substrate. Timber and metal stud take different screw types, and using the wrong ones is where you get spin-outs, snapped heads, and poor hold.
Is a Makita cordless screwdriver the same thing as a drywall gun?
No. A Makita cordless screwdriver is a general driver for controlled fixing, but a Makita plasterboard gun is set up for high-speed drywall screws and consistent depth control, which is what keeps plasterboard finishes clean.
Who Uses Makita Screw Guns on Site?
- Dryliners and partition teams who need a Makita drywall screw gun for consistent depth all day, especially on ceilings where missed depth shows up fast.
- Chippies doing studwork and boarding who want a Makita screw gun 18V that shares batteries with the rest of their Makita kit.
- Fit-out crews and maintenance lads who keep a Makita cordless screwdriver in the van for quick fixing jobs where an impact is too aggressive.
- Site managers and snagging teams who need a Makita plasterboard screw gun for small repairs that still have to look right at handover.
The Basics: Understanding Drywall Screw Guns
A drywall screw gun is built to drive screws to the same depth, repeatedly, without smashing the board. That is what keeps your finish tidy and your pace up.
1. Depth Stop, Not Guesswork
The nose and depth setting control how far the screw sinks, so heads sit just below the surface ready for tape and fill. On site, that means fewer torn boards, less rework, and a flatter finish.
2. High Speed Driving for Board Fixings
A Makita drywall gun runs fast to suit plasterboard screws, so you can rattle through sheets without leaning on the trigger for ages like you do with a general Makita cordless screwdriver.
3. Collated Auto Feed for Volume Work
A Makita auto feed screw gun uses strips of collated screws, feeding the next fixing as you work. In real terms, it keeps you on the board and off the floor, which is where time disappears on big jobs.
Makita Screw Gun Accessories That Keep You Moving
The right add-ons stop stoppages on board days and keep your fixing depth consistent from first sheet to last.
1. Collated Screw Magazine Attachments
If you are stepping up to collated work, the magazine is what turns a standard Makita drywall screw gun into a proper Makita collated gun. It saves you constantly reloading loose screws and helps keep your pace steady on ceilings and long partitions.
2. Collated Screw Strips
Buy the right collated screws for your board and substrate so the feed stays smooth and you are not fighting jams halfway through a run. It is also the quickest way to keep a team productive without sharing tubs of loose fixings.
3. Spare Driver Bits and Bit Holders
Drywall work eats bits, especially when you hit the odd metal edge or buried fixing. Keep spares in the box so you do not end up camming out heads and spending your afternoon digging out damaged screws.
4. Extra 18V LXT Batteries
A Makita screw gun cordless setup is only as good as the batteries you have charged. On big boarding days, having a spare battery ready saves you stopping mid-sheet or borrowing packs off the lads.
Shop Makita Screw Guns at ITS
Whether you need a Makita drywall screw gun for clean depth control, a Makita collated screw gun for volume fixing, or a Makita cordless screwdriver for lighter work, we stock the range in the key 18V options. It is all held in our own warehouse, in stock and ready for next day delivery so you can get back on the board without losing a day.
