Makita 40V XGT Plunge Saws
Makita 40V plunge saws are for dead-straight, clean cuts in sheet goods and worktops, without wrestling a full-size circular saw on site.
When you're trimming doors, breaking down ply, or cutting a sink cut-out in a fitted kitchen, a Makita plunge saw 40V on a rail keeps it accurate and tidy. The Makita XGT plunge saw range is built for daily graft, with proper power and control when the cut line matters. Grab a Makita 40V plunge saw kit if you want to turn up ready, rail and all.
What Jobs Are Makita 40V Plunge Saws Best At?
- Breaking down full sheets of ply, MDF, and melamine on the deck with a rail so you get straight edges without dragging a table saw onto site.
- Cutting worktops and breakfast bars cleanly, including sink and hob apertures, where a controlled plunge keeps the start and finish neat.
- Trimming doors and scribing panels during second fix, when you need a fine cut line that does not tear out the face veneer.
- Running long rip cuts for wardrobes, media walls, and built-ins, where a Makita 40V track saw holds the line and saves time on planing and sanding after.
- Doing refit and snag work in occupied homes, where a Makita 40v plunge saw with extraction set up keeps dust down and the job looking professional.
Choosing the Right Makita 40V Plunge Saw
Sorting the right makita 40v plunge saw is simple: match the kit to how often you're cutting sheet and how tidy the site needs to stay.
1. Bare Unit vs Makita 40V Plunge Saw Kit
If you are already on Makita XGT, a bare makita plunge saw 40v makes sense because you can use your existing 40V batteries and charger. If you are stepping up for kitchen and joinery work, buy the makita 40v plunge saw kit so you are not stuck day one with no rail, no batteries, and no way to finish the cut.
2. Rail and Cut Length
If you are mostly trimming doors and doing short cuts, a shorter rail is easier to store and handle. If you are ripping full sheets and worktops, you want longer rails or rail connectors so you are not stopping mid-cut and risking a step in the line.
3. Dust Control Set-Up
If you are working in finished properties, do not gamble on sweeping up later, run it with a proper extractor and the right hose adaptor. If you are outside on first fix, you can get away with less, but you will still cut cleaner and see your line better with extraction pulling the waste away.
Makita 40V Plunge Saw FAQs
Is the Makita 40V any good?
Yes, for trade use it is a proper step up when you are asking more of cordless, especially on saws. XGT is built for higher demand tools, so it holds its own on long cuts and tougher materials without feeling like it is on the limit.
Are Makita plunge saws any good?
Yes, they are a solid choice for joinery and fitting because they track straight, plunge smoothly, and give a clean finish when paired with the right rail and blade. They are not magic though, you still need to set depth properly and keep the rail clean for the best cut.
Is Makita 40V replacing 18v?
No, 18V LXT is not going anywhere for general site tools and lighter kit. Makita 40V XGT sits alongside it for higher demand tools and longer run time jobs, so plenty of trades run both platforms depending on what is in the van.
What size blade is a Makita 40V rail saw?
It depends on the exact model, so check the listing for the makita sp001gz03 or whichever saw you are buying. Most Makita track and plunge saws in this class commonly run a 165mm blade, but do not guess because bore size and kerf matter for fit and performance.
Will a Makita 40V track saw run on my 18V LXT batteries?
No, Makita XGT 40V and LXT 18V are different battery platforms and they do not cross over. If you are not already on XGT, a makita 40v track saw kit is the cleanest way to get batteries and charger sorted in one hit.
Who Are Makita 40V Plunge Saws For on Site?
- Chippies and kitchen fitters who need repeatable, straight cuts on sheet material and worktops without relying on a bench set-up.
- Joiners and shopfitters doing built-ins and second fix, where a rail cut saves you chasing gaps and filler on the final finish.
- Maintenance teams and snag crews who want a Makita 40V track saw kit that lives in the van and sorts awkward cuts cleanly, first time.
The Basics: Understanding Plunge Saws and Track Saws
A makita 40v track saw is basically a plunge saw designed to run on a guide rail, so you get table-saw straight cuts with site-friendly set-up. Here's what matters in real use.
1. Plunge Action (Clean Starts and Safe Control)
Instead of dropping a spinning blade onto the edge like a standard circular saw, you set the depth, place it on the rail, then plunge into the cut. That is why it is the go-to for worktop cut-outs and trimming panels without over-running corners.
2. The Guide Rail (Straight Cuts Without Clamping a Batten)
The rail gives you a fixed, straight reference edge, so you are not fighting wander in a long rip cut. On sheet goods, it saves time because the cut edge is usually good enough to fit straight off the saw.
3. Depth Setting (Cut What You Need, Not the Trellis Underneath)
Set depth to just clear the board and you avoid chewing into trestles, floors, or insulation. It also helps the blade run cleaner, especially on laminated boards where too much depth can increase breakout.
Makita 40V Track Saw Accessories That Save Time on Site
The saw is only half the story on a rail system, so these add-ons are what keep cuts straight, clean, and repeatable.
1. Guide Rails and Rail Connectors
Long rips and full worktop cuts are where rails earn their keep, and connectors stop you bodging two short rails together and ending up with a kink mid-cut.
2. Plunge Saw Blades for Wood and Laminates
A fresh, correct-tooth blade is what stops chipping on melamine and worktops, and it is cheaper than replacing a panel you have torn out on the face side.
3. Dust Extraction Hose Adaptors and Bags
Get the right adaptor for your extractor so it does not pop off every time you move, because nothing ruins a finished kitchen faster than dust tracked through the house.
4. Spare XGT Batteries
If you are cutting sheet all day, a second battery stops you downing tools halfway through a run of units, especially when you are working away from power and cannot wait on charging.
Shop Makita 40V Plunge Saws at ITS
Whether you need a bare Makita XGT plunge saw, a full makita 40v plunge saw kit, or rails and blades to match, we stock the range in the key options trades actually buy. It is all held in our own warehouse and ready for next day delivery, so you can get set up and cutting on tomorrow's job.
