< Back to Makita 40V XGT Saws
Makita 40V XGT Mitre Saws Makita 40V XGT Mitre Saws

Makita 40V XGT Mitre Saws

Makita 40V mitre saws are for fast, clean crosscuts and repeat angles on site without dragging leads or a noisy petrol saw around.

When you're trimming studs, cutting skirting, or knocking out door linings all day, a Makita XGT mitre saw keeps the cuts square and the pace up. Pick your blade size to suit the work: 216mm for van-friendly second fix, 260mm for all-round site cutting, and 305mm when you need proper depth for bigger timber and wider boards.

What Jobs Are Makita 40V Mitre Saws Best At?

  • Cutting skirting, architrave, and coving cleanly on second-fix, where a sharp blade and a solid fence save you filling and fettling later.
  • Chopping CLS and carcassing timber for stud walls and noggins, where repeat stops and quick mitre adjustments keep the line moving.
  • Trimming decking boards, sleepers, and treated timber outside, where a 40V Makita chop saw saves you running extension leads through mud and doorways.
  • Batch cutting for kitchens and joinery, where consistent angles and stable slides stop gaps showing up when you start fitting.
  • Site punch-list and snag work, where a compact Makita 40V 216mm mitre saw is quick to set up and easy to shift room to room.

Choosing the Right Makita 40V Mitre Saw

Match the blade size to what you actually cut most days, because that decides capacity, weight, and how often you'll curse it getting it in and out the van.

1. Blade Size: 216mm vs 260mm vs 305mm

If you're mainly on skirting, architrave, and trims, a Makita 40V mitre saw 216mm is easier to carry and set up. If you want one saw to cover most site timber and general joinery, the 260mm class is the sensible middle ground. If you're regularly into bigger sections and wider boards, go 305mm and stop forcing cuts that a smaller saw just isn't built for.

2. Chop Saw Style vs Sliding Mitre

If you're mostly crosscutting timber to length, a straight Makita 40V chop saw setup keeps things simple and robust. If you're fitting wide skirting, shelving, or boards, a sliding Makita 40V mitre saw gives you the extra cut width without flipping the work and risking a mismatch.

3. XGT Batteries: Don't Under-spec It

If you're doing quick snag cuts, smaller packs will get you through, but for full-day second fix you want decent capacity so the saw isn't dying mid-run. If you're cutting heavier timber all day, bring spare packs and keep one on charge, because cordless mitres chew power when you're pushing them hard.

Makita 40V Mitre Saw FAQs

Are Makita Mitre saws good?

Yes. Makita mitre saws are a solid choice for trade work because the fences and angle locks hold their settings, the slides stay smooth, and they cope with daily transport and site dust. Like any saw, they're only as good as the blade and setup, so keep it clean, square it up, and don't run a blunt blade.

Is a Makita 40V chop saw powerful enough for site timber?

For normal CLS, studwork, trims, and general joinery, yes, it's more than capable. Where people come unstuck is forcing thick, wet, treated timber with a finish blade. Use the right blade for the material and let the saw do the work.

Which size should I pick: Makita 40V mitre saw 216mm, 260mm, or 305mm?

216mm is the easy-carry option for second fix and smaller stock. 260mm is the best all-rounder if you want one saw that covers most jobs. 305mm is for bigger section timber and wider boards, but it's usually heavier and takes up more room, so only go that way if you'll use the extra capacity.

Do Makita XGT mitre saws make a mess with dust indoors?

They can do if you rely on the bag alone, especially cutting MDF and trims. If you're working in finished areas, run it with an extractor and the right adaptor and you'll keep the room far cleaner and save yourself a load of sweeping at the end.

Will a cordless Makita mitre saw replace my mains saw completely?

For most site cutting, yes, especially if you're already on the Makita 40V platform with spare batteries. If you're doing constant heavy cuts all day on thick stock, you'll still want enough batteries on rotation, because any cordless saw will slow you down if you turn up with one pack and hope for the best.

Who Uses Makita Mitre Saw 40V Kits?

  • Chippies and joiners doing first and second fix, because a Makita XGT mitre saw makes repeat cuts accurate without messing about with leads.
  • Kitchen fitters and shopfitters who need clean mitres and reliable bevels for trims, panels, and scribes that have to look right first time.
  • Roofers and timber framers who want a 305mm option for deeper cuts in bigger section timber when speed matters and the cut still has to be true.
  • Maintenance teams and site managers sorting small works, because a Makita 40V chop saw is quick to deploy for doors, trims, and repairs across a live site.

How a Makita XGT Mitre Saw Works for You

A mitre saw is all about repeatable accuracy. Set your angle, lock it off, and every cut lands the same, which is why they're a staple for second fix and trim work.

1. Mitre vs Bevel (Don't Mix Them Up)

Mitre is the left-right angle for corners, like skirting returns and architrave legs. Bevel is the tilt of the blade, used for compound cuts and certain mouldings. Get clear which one you need before you start, or you'll waste material fast.

2. Sliding Rails Are for Width, Not Depth

A slider lets the head travel, so you can cut wider boards in one pass. It doesn't magically turn a small saw into a big one for deep cuts, so blade size still matters when you're into thicker timber.

Makita 40V Mitre Saw Accessories That Save Time on Site

A cordless mitre is only as good as the blade, the dust control, and how stable it is when you're batch cutting.

1. Spare Blades (Correct Size and Tooth Count)

Keep at least one sharp blade ready to go, because a tired blade burns timber, pulls at the cut, and turns tidy trim work into a filling job. Match the blade to the material, with finer teeth for clean finish cuts and a more general blade for site timber.

2. Dust Bags or Extractor Adaptors

Sort the dust from day one, especially indoors, because mitre saws throw it everywhere and you'll be the one sweeping up. A proper adaptor to your extractor makes a big difference when you're cutting MDF and finished trims.

3. Mitre Saw Stand

A stand stops you balancing timber on a stack of boards and chasing accuracy all day. If you're cutting lengths repeatedly, the support arms and stops pay for themselves in fewer bad cuts and less back-and-forth.

Shop Makita 40V Mitre Saws at ITS

Whether you need a compact Makita 40V 216mm mitre saw for second fix, a 260mm all-rounder, or a Makita 40V mitre saw 305mm for bigger timber, we stock the range to suit real site work. It's all held in our own warehouse, in stock and ready for next day delivery so you can get cutting on tomorrow's shift.

Read more

Makita 40V XGT Mitre Saws

Makita 40V mitre saws are for fast, clean crosscuts and repeat angles on site without dragging leads or a noisy petrol saw around.

When you're trimming studs, cutting skirting, or knocking out door linings all day, a Makita XGT mitre saw keeps the cuts square and the pace up. Pick your blade size to suit the work: 216mm for van-friendly second fix, 260mm for all-round site cutting, and 305mm when you need proper depth for bigger timber and wider boards.

What Jobs Are Makita 40V Mitre Saws Best At?

  • Cutting skirting, architrave, and coving cleanly on second-fix, where a sharp blade and a solid fence save you filling and fettling later.
  • Chopping CLS and carcassing timber for stud walls and noggins, where repeat stops and quick mitre adjustments keep the line moving.
  • Trimming decking boards, sleepers, and treated timber outside, where a 40V Makita chop saw saves you running extension leads through mud and doorways.
  • Batch cutting for kitchens and joinery, where consistent angles and stable slides stop gaps showing up when you start fitting.
  • Site punch-list and snag work, where a compact Makita 40V 216mm mitre saw is quick to set up and easy to shift room to room.

Choosing the Right Makita 40V Mitre Saw

Match the blade size to what you actually cut most days, because that decides capacity, weight, and how often you'll curse it getting it in and out the van.

1. Blade Size: 216mm vs 260mm vs 305mm

If you're mainly on skirting, architrave, and trims, a Makita 40V mitre saw 216mm is easier to carry and set up. If you want one saw to cover most site timber and general joinery, the 260mm class is the sensible middle ground. If you're regularly into bigger sections and wider boards, go 305mm and stop forcing cuts that a smaller saw just isn't built for.

2. Chop Saw Style vs Sliding Mitre

If you're mostly crosscutting timber to length, a straight Makita 40V chop saw setup keeps things simple and robust. If you're fitting wide skirting, shelving, or boards, a sliding Makita 40V mitre saw gives you the extra cut width without flipping the work and risking a mismatch.

3. XGT Batteries: Don't Under-spec It

If you're doing quick snag cuts, smaller packs will get you through, but for full-day second fix you want decent capacity so the saw isn't dying mid-run. If you're cutting heavier timber all day, bring spare packs and keep one on charge, because cordless mitres chew power when you're pushing them hard.

Makita 40V Mitre Saw FAQs

Are Makita Mitre saws good?

Yes. Makita mitre saws are a solid choice for trade work because the fences and angle locks hold their settings, the slides stay smooth, and they cope with daily transport and site dust. Like any saw, they're only as good as the blade and setup, so keep it clean, square it up, and don't run a blunt blade.

Is a Makita 40V chop saw powerful enough for site timber?

For normal CLS, studwork, trims, and general joinery, yes, it's more than capable. Where people come unstuck is forcing thick, wet, treated timber with a finish blade. Use the right blade for the material and let the saw do the work.

Which size should I pick: Makita 40V mitre saw 216mm, 260mm, or 305mm?

216mm is the easy-carry option for second fix and smaller stock. 260mm is the best all-rounder if you want one saw that covers most jobs. 305mm is for bigger section timber and wider boards, but it's usually heavier and takes up more room, so only go that way if you'll use the extra capacity.

Do Makita XGT mitre saws make a mess with dust indoors?

They can do if you rely on the bag alone, especially cutting MDF and trims. If you're working in finished areas, run it with an extractor and the right adaptor and you'll keep the room far cleaner and save yourself a load of sweeping at the end.

Will a cordless Makita mitre saw replace my mains saw completely?

For most site cutting, yes, especially if you're already on the Makita 40V platform with spare batteries. If you're doing constant heavy cuts all day on thick stock, you'll still want enough batteries on rotation, because any cordless saw will slow you down if you turn up with one pack and hope for the best.

Who Uses Makita Mitre Saw 40V Kits?

  • Chippies and joiners doing first and second fix, because a Makita XGT mitre saw makes repeat cuts accurate without messing about with leads.
  • Kitchen fitters and shopfitters who need clean mitres and reliable bevels for trims, panels, and scribes that have to look right first time.
  • Roofers and timber framers who want a 305mm option for deeper cuts in bigger section timber when speed matters and the cut still has to be true.
  • Maintenance teams and site managers sorting small works, because a Makita 40V chop saw is quick to deploy for doors, trims, and repairs across a live site.

How a Makita XGT Mitre Saw Works for You

A mitre saw is all about repeatable accuracy. Set your angle, lock it off, and every cut lands the same, which is why they're a staple for second fix and trim work.

1. Mitre vs Bevel (Don't Mix Them Up)

Mitre is the left-right angle for corners, like skirting returns and architrave legs. Bevel is the tilt of the blade, used for compound cuts and certain mouldings. Get clear which one you need before you start, or you'll waste material fast.

2. Sliding Rails Are for Width, Not Depth

A slider lets the head travel, so you can cut wider boards in one pass. It doesn't magically turn a small saw into a big one for deep cuts, so blade size still matters when you're into thicker timber.

Makita 40V Mitre Saw Accessories That Save Time on Site

A cordless mitre is only as good as the blade, the dust control, and how stable it is when you're batch cutting.

1. Spare Blades (Correct Size and Tooth Count)

Keep at least one sharp blade ready to go, because a tired blade burns timber, pulls at the cut, and turns tidy trim work into a filling job. Match the blade to the material, with finer teeth for clean finish cuts and a more general blade for site timber.

2. Dust Bags or Extractor Adaptors

Sort the dust from day one, especially indoors, because mitre saws throw it everywhere and you'll be the one sweeping up. A proper adaptor to your extractor makes a big difference when you're cutting MDF and finished trims.

3. Mitre Saw Stand

A stand stops you balancing timber on a stack of boards and chasing accuracy all day. If you're cutting lengths repeatedly, the support arms and stops pay for themselves in fewer bad cuts and less back-and-forth.

Shop Makita 40V Mitre Saws at ITS

Whether you need a compact Makita 40V 216mm mitre saw for second fix, a 260mm all-rounder, or a Makita 40V mitre saw 305mm for bigger timber, we stock the range to suit real site work. It's all held in our own warehouse, in stock and ready for next day delivery so you can get cutting on tomorrow's shift.

View Basket

View Basket
ITS Click and Collect Icon
What3Words:
Store Opening Hours
Opening times