Makita 40V XGT Second Fix Finishing Nail Guns
Makita 40V Xgt Second Fix Finishing Nail Guns are for clean, fast fixings on trim, architrave, skirting and cabinets, without dragging a compressor around.
When you're on second fix and the snag list is breathing down your neck, you need nails going in straight, flush, and repeatable. Makita's 40V XGT finishers give you cordless speed with proper site reliability, so you can move room to room, keep the work tidy, and get the job signed off.
What Jobs Are Makita 40V Xgt Second Fix Finishing Nail Guns Best At?
- Fixing skirting, architrave, door stops and beading where you want a clean finish and minimal filling before paint.
- Installing kitchen panels, end caps, plinth returns and light trims where a cordless finisher saves you hauling hoses through a finished house.
- Pinning and securing mouldings and decorative timber on refurb work when you need quick grab without splitting the edge.
- Second-fix joinery on new builds where you're bouncing between plots and need consistent depth without a compressor setup every time.
Choosing the Right Makita 40V Xgt Second Fix Finishing Nail Gun
Match the nailer to the finish you're trying to achieve and the material you're fixing into, not just what's on offer.
1. Nail type and gauge (finish vs brad)
If you're doing heavier second-fix like skirting and thicker architrave, go for a proper finishing nailer that gives you a stronger hold. If you're on delicate trims and beading where you want the smallest hole to fill, a brad-style option is the cleaner choice.
2. Nail length range for the timber you fit
If you regularly fix through thick mouldings into stud or block, make sure the gun takes the nail lengths you actually use on site. There's no point buying a nailer that tops out short, then ending up back on screws and plugs for half the job.
3. Depth adjustment and nose style
If you're working on pre-finished trims and painted boards, you want easy depth control so you're not blowing nails too deep and spending your life filling. A non-marring nose or contact tip is worth having when the client is watching the finish.
Who Uses Makita 40V Xgt Second Fix Finishing Nail Guns?
- Chippies and joiners doing second fix, because it speeds up skirting and architrave without leaving a mess of airline marks through the house.
- Kitchen fitters and shopfitters who need quick, tidy fixings on panels and trims while working in finished spaces.
- Maintenance teams and refurb crews who want a grab-and-go nailer for punch-list work without dragging a compressor up stairs.
How Cordless Second Fix Finishing Nail Guns Work for You
Cordless finishing nail guns are about getting the same tidy result as air, without the setup time and trip hazards. Here's what matters on site.
1. Consistent drive without the compressor
Instead of relying on air pressure, the gun drives nails under its own power, so you can work room to room without hoses snagging on new doors, fresh paint, or finished flooring.
2. Depth control is what keeps the finish tidy
The key outcome is setting the nail head just below the surface without tearing the timber. Get the depth right and you're doing a quick dab of filler, not a full repair and sand.
3. The battery platform is the real "system"
Makita 40V XGT is built for higher demand tools, so if you're already running XGT on saws and drills, sticking with the same batteries keeps your second-fix kit simple and avoids dead tools mid-room.
Finishing Nail Gun Accessories That Save Time on Second Fix
A nailer is only as useful as the nails and batteries you've got to keep it firing cleanly all day.
1. Finishing nails to suit your material
Keep the right lengths and coatings in the van so you're not trying to make do with whatever's left in the box. The wrong nail is how you end up with split trim, poor hold, or proud heads that need a punch.
2. Spare Makita 40V XGT batteries
Second fix is stop start, but when you're on a run of doors or a full house of skirting, you'll chew through power. A spare battery means you're not waiting around while the charger catches up.
3. Charger for the van or site setup
If you're moving between plots or doing maintenance calls, a dedicated charger keeps the XGT kit topped up so the nailer is always ready when you walk into the next job.
Shop Makita 40V Xgt Second Fix Finishing Nail Guns at ITS
Whether you need a bare tool to match your existing Makita 40V XGT batteries or a full setup for second fix, we stock the Makita 40V Xgt Second Fix Finishing Nail Guns range in one place. It's all held in our own warehouse, in stock and ready for next day delivery so you can order today and be nailing tomorrow.
Makita 40V Xgt Second Fix Finishing Nail Guns FAQs
What are the features of Makita 40V Xgt Second Fix Finishing Nail Guns?
They're built for second-fix accuracy and speed, so you're looking at controlled nail driving, adjustable depth for a tidy finish, and cordless convenience for working through finished rooms without hoses. Exact features vary by model, so check nail gauge, nail length range, and whether it's set up more for heavier finish nails or finer trim work.
Are Makita 40V Xgt Second Fix Finishing Nail Guns available with batteries and charger?
Yes, you'll see options across the range, including body-only for lads already on Makita 40V XGT, and kits that include batteries and a charger for getting started from scratch. Always check the listing, because not every nail gun is packaged the same way.
Is there a warranty on Makita 40V Xgt Second Fix Finishing Nail Guns?
Yes, Makita tools are covered by a manufacturer warranty, and you'll also have your standard UK consumer rights. Warranty length and any registration requirements can differ, so it's worth checking the product details and keeping your proof of purchase for site records.
Are Makita 40V Xgt Second Fix Finishing Nail Guns suitable for professional tradesmen?
Yes, they're aimed at trade use, especially second fix where you need consistent depth and repeatable results across a full house. They're a solid choice for joiners, kitchen fitters, and maintenance teams who want cordless speed without compromising the finish.
Do you offer next day delivery on Makita 40V Xgt Second Fix Finishing Nail Guns?
Yes, we offer next day delivery on in-stock Makita 40V Xgt Second Fix Finishing Nail Guns from our own warehouse, so you can get the tool on site fast. Delivery options and cut-off times are shown at checkout for your postcode.
