Makita 18V LXT Metal Cutting Saws
Makita 18V Lxt Metal Cutting Saws are for fast, clean cuts in steel without dragging a grinder out.
When you're trimming tray, angle, box section or stud, a proper metal cutting saw saves time and mess. Makita's 18V LXT range gives you cordless freedom on fit-outs and refurb work, with guarded blades and chip control that keeps the cut line visible. Pick the right blade for the material and you'll get square cuts without cooking the steel.
What Jobs Are Makita 18V Lxt Metal Cutting Saws Best At?
- Cutting Unistrut, tray, trunking and threaded rod on first fix, so brackets and supports go in square without hours on the file.
- Trimming angle iron and box section for gates, frames and plant-room work where you need a straighter cut than a 1mm disc will give you.
- Snapping down metal stud and track on fit-outs with less spark and less heat build-up, so you are not burning coatings and edges.
- Doing punch-list alterations in occupied buildings where you want controlled chips and a guarded blade rather than showering the place with grinder sparks.
Choosing the Right Makita 18V Lxt Metal Cutting Saw
Sort the right saw by matching the cut depth and blade type to what you actually cut all week, not what you might cut once.
1. Blade type and material
If you are mainly on tray, strut and thin section, go for the model and blade setup designed for cold cutting so it throws chips, not sparks. If you are into thicker section, do not cheap out on blades because the wrong tooth count will snag, wander, and burn the edge.
2. Cut depth and capacity
If you are regularly cutting box section or stacked material, check the max depth at 90 degrees before you buy. A smaller saw is handier overhead, but it is no use if you are finishing every cut with a grinder.
3. Battery size for real site pace
If you are doing a handful of cuts, 3.0Ah will get you by. If you are cutting all day, run 5.0Ah packs so the saw holds speed under load and you are not swapping batteries every ten minutes.
4. Chip control and guarding
If you are working indoors or near finished surfaces, prioritise a saw with decent chip collection and a solid guard. It is the difference between a quick cut and an hour of snagging, hoovering, and explaining marks to the client.
Makita 18V Lxt Metal Cutting Saws FAQs
What are the features of Makita 18V Lxt Metal Cutting Saws?
They are built for controlled, straight metal cutting with guarded blades and chip management, so you get cleaner cuts than a grinder and less heat in the work. Most models are set up for fast, repeatable site cuts on section, strut and sheet when paired with the correct blade.
Are Makita 18V Lxt Metal Cutting Saws available with batteries and charger?
Yes, you will see both body options and kits with batteries and a charger depending on the model. If you are already on Makita 18V LXT, buying the body makes sense, but if this is your first LXT saw, a kit stops you getting caught short on day one.
Is there a warranty on Makita 18V Lxt Metal Cutting Saws?
Yes, Makita tools come with a manufacturer warranty, and some models may qualify for an extended warranty if you register them with Makita within the required time. Keep your proof of purchase and register promptly if you want the extra cover.
Are Makita 18V Lxt Metal Cutting Saws suitable for professional tradesmen?
Yes, they are a proper trade choice for sparks, HVAC, fitters and maintenance teams doing repeat cuts in strut and section. They are tough, but they still need the right blade and a supported workpiece, because forcing the cut is what kills blades and makes any saw feel rough.
Do you offer next day delivery on Makita 18V Lxt Metal Cutting Saws?
Yes, we offer next day delivery on in stock Makita 18V LXT metal cutting saws from our own warehouse. Order in time and you can have it on site for the next shift.
Who Uses Makita 18V Lxt Metal Cutting Saws?
- Sparks and HVAC installers cutting tray, trunking and strut on ladders and lifts, because it is quicker and easier to keep cuts consistent.
- Steel fixers, fabricators and maintenance fitters trimming section and plate on site when a chop saw is not practical to drag in.
- Dryliners and shopfitters working with metal stud and track, especially on refurbs where clean, controlled cutting matters.
How Metal Cutting Saws Work for You
These are built to cut metal in a more controlled way than a grinder, giving you straighter cuts and less heat in the workpiece when the blade is matched to the material.
1. Cold cutting versus grinding
A metal cutting saw uses a toothed blade to shear through the section, so the cut is faster and the steel does not get red hot like it can with a disc. That means less burr, less damage to coatings, and less time dressing edges.
2. Chips, not sparks
Instead of a shower of sparks, you get hot chips that can be directed into a catcher or away from the cut line. It is still PPE territory, but it is a cleaner way to work in plant rooms, risers, and finished areas.
3. Blade choice is everything
Tooth count and blade spec decide whether it slices clean or snatches and chatters. Use the blade made for the metal you are cutting, and replace it when it starts tearing the edge because a blunt blade is what makes cuts wander.
Metal Cutting Saw Accessories That Save Time on Site
The right extras keep cuts cleaner, batteries lasting longer, and your hands out of trouble.
1. Spare metal cutting blades
Have at least one spare blade in the van because once a blade is chipped or blunt you will feel it straight away in slower cuts and rough edges, and you will end up reaching for the grinder to finish the job.
2. 5.0Ah Makita LXT batteries
A bigger pack keeps the saw pulling through thicker section without bogging down, and it stops you getting caught mid-cut when you are up a ladder or working off a lift.
3. Fast charger
If you are cutting all day, a fast charger is what keeps the rotation going between packs so you are not waiting around while the rest of the gang crack on.
4. Clamps and a proper work support
Clamp the section down and support both sides of the cut to stop pinching and snatching, especially on strut and box where it can grab right at the end of the cut.
Why Shop for Makita 18V Lxt Metal Cutting Saws at ITS?
Whether you need a compact saw for tray and strut or a higher capacity model for thicker section, we stock the full Makita 18V LXT metal cutting saw range and the blades and batteries to match. It is all held in our own warehouse, in stock and ready for next day delivery so you can order today and be cutting on site tomorrow.
