Festool Systainer Tool Box Accessories & Inlays
Stop tools knocking together in the van with Festool Systainer tool box inlays matched to your case and kit.
Joiners and fitters use fitted inserts to keep tools, batteries and accessories in place between jobs. Check the Systainer generation, internal height and tool model before buying. Choose the insert that fits your actual load.
What Are Festool Systainer Tool Box Inlays Used For?
- Keep a drill, batteries and charger separated during van journeys so loose kit is not knocking against the tool housing.
- Pack a dedicated fitting kit for kitchen installations, with each tool sitting in its own recess rather than buried beneath accessories.
- Separate small fittings and consumables in a compatible organiser insert so you can find the right part without emptying the case.
- Spot missing kit before leaving a refurb by checking the empty spaces in a fitted tool insert.
Choosing the Right Festool Systainer Tool Box Inlays
Match the insert to the case first, then the tool; a similar-looking footprint is not enough.
1. Case Generation and Size
Check the stated compatibility with your Systainer generation and size. Cases that connect externally do not necessarily accept the same internal fittings. Confirm the usable height as well as the footprint, especially if you store a tool with its battery attached.
2. Exact Tool Model
If you want a moulded tool insert, buy against the exact model listed. A recess made for another drill or sander may leave your tool rocking, or stop the lid closing. Check whether the layout accommodates your charger and battery sizes too.
3. Fixed Layout or Adaptable Storage
Choose a model-specific insert for a tool that stays in the same case. For mixed equipment, a suitable cut-to-fit foam insert gives more layout freedom. Use compartment inserts for loose fittings rather than cutting dozens of small pockets into foam.
Who Uses Festool Systainer Inlays?
Joiners, kitchen fitters and cabinet installers use fitted inlays to carry tools between the workshop, van and customer's property without loose kit shifting inside the case. Maintenance teams use organised inserts to keep repeat-job kits together, making it easier to check that tools and accessories are packed before moving on.
Accessories to Finish Your Systainer Layout
A base insert is only part of the setup; check these additions against your particular case before ordering.
1. Compatible Lid Cushions
A suitable lid cushion can help limit movement above stored kit. Check the remaining clearance first: too much padding can press against the tool or prevent the lid closing properly.
2. Compatible Insert Boxes
Insert boxes keep screws, fittings and small accessories separated in suitable organiser layouts. Match them to the organiser system so loose containers do not slide around or spill when the case is carried.
Choose the Right Festool Systainer Inlay for the Job
Start with what you carry, then check the insert's stated case compatibility.
| Your Job | Inlay Type | Key Features |
|---|---|---|
| Carrying one dedicated power tool between jobs | Model-specific moulded insert | Correct tool recess, case fit and space for the listed accessories. |
| Building a case around mixed tools or measuring equipment | Suitable cut-to-fit foam inlay | Adaptable layout, sufficient depth and support between cut-outs. |
| Sorting screws, fittings and small consumables | Compatible compartment insert or insert boxes | Compartment sizes suited to the contents and secure retention within the case. |
| Replacing a damaged original tool tray | Matching replacement insert | Exact tool model, Systainer generation and insert reference checked before ordering. |
Common Buying and Usage Mistakes
- Buying on the Systainer name alone can leave you with an insert that does not seat properly. Check the specified case generation, size and tool compatibility.
- Ignoring the lid clearance can put pressure on switches, batteries or accessories. Check that the loaded case closes without forcing the catch.
- Cutting foam pockets too large lets equipment move around. Mark out the layout first, follow the foam instructions and remove material gradually.
- Expecting an inlay to waterproof the contents risks damage to stored kit. Weather protection depends on the case, not the insert.
Moulded Tool Inserts vs Foam Inlays vs Compartment Inserts
Moulded Tool Inserts
Choose these for a dedicated tool setup with confirmed model compatibility. The shaped layout makes packing straightforward, but gives less freedom if you change tools or want to carry different accessories.
Foam Inlays
Suitable customisable foam lets you build a layout around mixed equipment. It takes more preparation than a moulded tray, and badly spaced cut-outs can leave thin sections that tear during use.
Compartment Inserts
Choose compartments for screws, fittings and small accessories you need to pick out regularly. They organise quantities better than individual foam recesses, but do not provide the same close-fitting support for a power tool.
Maintenance and Care
Clear Out Loose Debris
Remove tools and clear out swarf, screws and grit before they become trapped underneath. Brush or vacuum the insert using equipment suitable for the debris; avoid blowing dust around the workshop.
Pack Dry Equipment
Do not leave damp tools enclosed against an inlay. Dry the tools and let any damp insert dry fully before closing the case, helping prevent corrosion during storage.
Check Tool Support
Inspect foam for torn sections and moulded trays for cracks. Replace an insert if it no longer holds the intended kit securely rather than relying on loose packing to fill the gaps.
Avoid Harsh Cleaners
Follow the cleaning guidance for the insert material. Do not soak foam or use solvents without checking suitability, as damaged material may lose its shape or support.
Why Shop for Festool Systainer Tool Box Inlays at ITS?
Shop the full Festool Systainer tool box inserts and accessories range at ITS to match your case, tool and storage layout. Stock is held in our own warehouse, ready for next-day delivery on in-stock items. Check the product's compatibility, current availability and delivery terms before ordering.
Festool Systainer Tool Box Inlays FAQs
What are tool box inlays used for?
They organise and support tools or accessories inside a case, reducing movement during transport. A fitted layout also makes missing kit easier to spot before you leave site. The level of support depends on the insert design and how closely it fits the contents.
Do Festool inlays fit any tool box?
No. Check the specified Systainer generation, case size and, for shaped tool inserts, the exact tool model. Similar external dimensions or compatible stacking connections do not guarantee that an insert will fit inside another case.
Are Festool tool box inlays foam?
Not all of them. Festool storage inserts include foam options and moulded tool trays, while organiser systems use compartments or insert boxes. Check the individual description rather than assuming every product described as an inlay is soft foam or can be cut to shape.
Are Festool tool box inlays any good?
They are useful if you want a repeatable packing layout and less movement inside your Systainer. A correctly matched insert is the important part: the wrong tray will not support your tool properly. An inlay is not a substitute for securing the case in the van or handling it carefully.
Where are Festool tools made?
Festool manufactures many of its power tools in Germany and also has production facilities in other countries. Origin varies by product, and a storage accessory may not be made in the same country as the tool it holds. Check the product or packaging label if the origin of a particular item matters to your purchase.
