Festool SORTAINER Toolboxes With Drawers
Festool Sortainer with drawers keeps fixings, bits and small kit sorted, stacked and easy to grab when you're moving between bench work, fitting jobs and site vans.
If you're sick of tipping out boxes to find one connector block or the right screws, a festool sortainer drawer setup is the fix. These are proper drawer storage sortainer units for joiners, fitters and install teams who need small parts organised, visible and locked into the wider Festool stack. Start with a Festool Sortainer that suits the parts you carry and stop wasting time rummaging.
What Are Festool Sortainer With Drawers Used For?
- Sorting screws, plugs, ferrules, connectors and small fittings on first fix so you are not digging through mixed tubs at the bottom of the van.
- Keeping bench and install work tidy in kitchens, workshops and refits where you need fast access to consumables without unstacking your full kit.
- Loading service parts and snagging gear for maintenance jobs where a festool sortainer tool box with drawers saves repeat trips back out to the van.
- Stacking organised small-part storage into the Festool system for site moves, so drawer storage stays with the rest of your kit instead of rattling loose in separate cases.
- Setting up repeat install work such as ironmongery, cabinet fitting and electrical second fix where each drawer can hold one size or one task's worth of gear.
Choosing the Right Festool Sortainer With Drawers
Sort the right one by what you actually carry each day, not by whichever box looks tidy on the shelf.
1. Drawer Count vs What You Carry
If you carry lots of different small fixings, go for more drawers so each size has its own place. If your jobs are simpler and you only need a few core consumables, fewer drawers can be quicker to manage and less cluttered.
2. Bench Use vs Van Use
If it is living in the workshop or on a fitting bench, think about fast access and clear organisation first. If it is riding in the van every day, make sure the size works with the rest of your stack and does not become the awkward one that never packs properly.
3. Small Parts Only or Mixed Kit
These are best when used as a proper small-parts organiser. Do not buy a festool sortainer tool box with drawers expecting it to replace a deep case for bulky hand tools. Use drawers for what gets lost, mixed up or wasted time finding.
4. Match It to Your Existing Stack
If you already run Festool Systainer cases, check how this unit will sit in the stack and how often you will need drawer access without breaking the whole lot down. That matters more on site than the brochure spec.
Who Uses These on Site?
- Joiners and kitchen fitters swear by a festool sortainer with drawers for hinges, shelf pins, confirmat screws and little hardware that goes missing if it is all thrown in one box.
- Sparkies use them for terminals, clips, glands and fixings, especially on second fix when you need the right small parts to hand without emptying half the van.
- Maintenance teams and service engineers keep a festool sortainer drawer loaded by task, so one drawer is fasteners, one is electrical consumables, and one is snagging bits.
- Workshop and bench-based makers use them beside saws and assembly benches where organised drawers speed up repeat work and keep small stock visible.
The Basics: Understanding Festool Sortainer With Drawers
The point of these is simple. They give you drawer access for small parts without turning your storage into a pile of loose tubs and mixed boxes. Here is what matters on the job.
1. Drawers Instead of Lift-Out Cases
A festool sortainer drawer lets you pull out the part you need straight away. That is quicker for screws, connectors and fittings than opening a deep toolbox and rummaging about at the bottom.
2. System Storage That Stays Organised
Because the Sortainer is part of the wider Festool storage setup, you can keep small parts with your main kit instead of carrying a separate organiser that never stacks right and always ends up left in the van.
3. Best for Repetitive Fitting Work
These come into their own when you use the same consumables day after day. If you are fitting kitchens, doing second fix or handling service stock, organised drawers save more time than a big empty box ever will.
Accessories and Matching Storage That Make More Sense on Site
A drawer unit works best when it fits the rest of your storage rather than becoming the odd box you never take in.
1. Stacking Cases
Pairing your drawer unit with matching cases saves the usual mess of carrying separate organisers and tool boxes. If your install kit, power tools and small parts all stack together, you make one trip in instead of three.
2. Labels and Drawer Layouts
Label the drawers by fixing type, fitting size or job stage. It sounds basic, but it stops apprentices loading mixed screws back into the wrong drawer and saves you standing there checking every compartment.
3. Matching Drawer Storage Units
If one unit fills up fast, look at Festool Systainer Toolboxes With Drawers or the wider Festool Toolboxes With Drawers range so your storage grows without turning into a random pile of cases.
Choose the Right Festool Sortainer With Drawers for the Job
Pick the setup by parts volume, access needs and how it fits your stack.
| Your Job | Category or Type | Key Features |
|---|---|---|
| Second fix and snagging work | Compact festool sortainer with drawers | Fast access to small consumables, easy to carry, keeps connectors and fixings separate |
| Kitchen fitting and cabinet installs | Multi drawer sortainer | More drawer separation for hinges, screws, shelf supports and ironmongery |
| Workshop bench organisation | Drawer storage sortainer | Visible stock, repeat-use layout, less time lost hunting for small parts |
| Van based service and maintenance work | Stackable festool sortainer tool box | Fits system storage, keeps task-based consumables together, tidier transport between jobs |
Common Buying and Usage Mistakes
- Buying a drawer unit to carry bulky hand tools is the usual wrong turn. These are strongest when used for small parts and consumables, so keep heavier loose tools in a deeper case.
- Mixing different screw sizes in one drawer defeats the whole point. Split your stock properly or you will still waste time checking every handful before you can fix anything.
- Ignoring how it fits the rest of your stack leads to awkward loading and constant unpacking. Check the size against your existing Festool setup before you buy.
- Overloading drawers with dense metal fixings makes access clumsy and can wear the unit faster. Spread heavy stock sensibly and keep the most-used items in the easiest drawers to reach.
- Leaving drawers unlabelled sounds harmless until someone else reloads the kit. Mark them clearly and the whole team can put parts back where they belong.
Sortainer With Drawers vs Systainer vs Open Toolbox
Festool Sortainer With Drawers
Best for screws, fittings, connectors and all the little parts that waste time when they get mixed together. If your work is install-heavy or bench-based, the drawer access is the big win.
Festool Systainer
Better for carrying tools, chargers and larger kit that does not suit shallow drawers. It is the better choice when you need protected storage for the main tool rather than sorted access to small stock.
Open Toolbox
Quick for chucking in hand tools, but poor for small consumables unless you like digging about. Fine for rough access, not much good if you need repeatable organisation and tidy stacking.
Maintenance and Care
Keep the Drawers Clean
Tip out dust, plaster crumbs and loose swarf every so often. Fine site muck builds up in drawer runners and makes access rougher than it needs to be.
Do Not Overload One Drawer
Spread heavy fixings across the unit rather than filling one drawer with bolts and anchors. It keeps the drawers running properly and stops one section taking all the abuse.
Store It Stacked Properly
If it is part of your van stack, secure it square and flat. A badly loaded pile of boxes gets knocked about, and drawer units hate being twisted under weight.
Relabel as the Work Changes
When your jobs shift from first fix to second fix or from workshop to install, change the drawer layout. A good storage system only works if it still matches the gear you reach for daily.
Why Shop for Festool Sortainer With Drawers at ITS?
Whether you need one festool sortainer drawer unit for service stock or a full stackable setup for fitting work, we stock the proper range. You will find the wider Festool Tool Storage range here too, all held in our own warehouse and ready for next day delivery across the UK.
Festool Sortainer With Drawers FAQs
What is a Festool Sortainer?
A Festool Sortainer is a modular storage case built mainly for organising small parts, fixings and consumables in pull-out drawers. Think of it as the part of the Festool system that stops screws, connectors and fittings getting mixed up or lost at the bottom of a toolbox.
How many drawers does the Festool Sortainer have?
That depends on the model. Some Festool Sortainer with drawers units are set up with fewer larger drawers, while others give you more separation for smaller parts. Check the product listing properly and buy by what you carry, not just by the outside size.
Is the Festool Sortainer compatible with the Systainer stacking system?
Yes, that is one of the main reasons trades buy them. A Festool Sortainer is designed to work within the wider stacking setup, so your small-parts storage can travel with your main tool cases instead of becoming a separate awkward box.
What is the difference between a Festool Systainer and Sortainer?
A Festool Systainer is usually the better choice for storing tools and larger kit in a lidded case. A Sortainer is more about drawer access and organising smaller stock. If you are carrying a saw, drill or charger, go Systainer. If you are sorting screws, fittings and consumables, go Sortainer.
Will a festool sortainer with drawers hold up in a work van every day?
Yes, if you use it for the job it is meant for and stack it properly. It is solid site storage, but like any drawer unit it lasts better when it is kept square in the stack and not overloaded with dense loose metal fixings.
Is a festool sortainer drawer better than a standard organiser box?
For anyone already in the Festool system, usually yes. The big gain is proper stacking and faster drawer access on installs or bench work. A cheap organiser works until it cracks, spills or refuses to fit with the rest of your kit.
