Dewalt Multi Tool Blade Sets
DeWalt multi tool blades are the sets you grab when the job keeps changing and one blade will not last the day on wood, metal, plastic or plasterboard.
On snagging, refits, first fix and patch jobs, a proper dewalt multi tool blade set saves walking back to the van every half hour. These DeWalt oscillating blades are built for the usual site mix of timber, screws, pipes and trims, so you can swap fast and keep cutting. If you already run DeWalt 12V XR multi tools or DeWalt 18V XR multi tools, this is the sensible way to stay covered.
What Are DeWalt Multi Tool Blades Used For?
- Cutting door linings, skirting and architrave in place is where dewalt multi tool blades earn their keep, especially when you need a flush cut without ripping half the finish apart.
- Trimming out plasterboard, opening small access points and cleaning up awkward corners is quicker with DeWalt oscillating multi tool blades than trying to force a bigger saw into tight spots.
- Cutting through nails, screws, thin metal and mixed materials during refurbs is exactly why a set matters, because one blade rarely suits every hidden fixing you hit.
- Working on kitchens, bathrooms and flooring, a dewalt multi tool wood blade helps with timber cuts while a dewalt multi tool metal blade deals with brackets, fixings and pipe clips without swapping tools.
- Snagging and punch list work goes faster when you have a full dewalt multi tool blade set to hand, so you can move from trimming trims to notching boards and scraping old sealant without losing time.
Choosing the Right DeWalt Multi Tool Blades
Sorting the right set is simple: buy for the material you actually hit on site, not the one you hope the job will be.
1. Mixed Sets vs Single Material Sets
If your day jumps from timber to screws to plasterboard, go for a mixed dewalt multi tool blade set. If you mostly do one type of work such as carpentry or metal cut-outs, a set focused on that material will usually last better and cut cleaner.
2. Wood Blade vs Metal Blade
Use a dewalt multi tool wood blade for timber, sheet goods and general trimming. If you know there are nails, screws, brackets or thin steel in the cut, stop guessing and fit a dewalt multi tool metal blade or you will blunt the wrong blade fast.
3. Quantity in the Pack
If it is just occasional snagging, a small set is enough. If you are fitting kitchens, doing refurbs or cutting all week, buy the bigger pack now because multi tool blades are one of those bits you always get through quicker than planned.
4. Cut Type and Access
For neat plunge cuts and trimming in corners, pick blades shaped for controlled entry and flush work. If the job is more about ripping through old fixings and rough openings, choose tougher blades over fine-finish ones and keep the cleaner cuts for visible work.
Who Uses These Blade Sets?
- Chippies use these for first fix and second fix cutting, especially undercutting frames, trimming sheet materials and sorting those last bits that need a flush finish.
- Sparkies keep DeWalt oscillating blades in the bag for cutting plasterboard, notching back boxes and opening neat access points without smashing out more wall than needed.
- Plumbers and heating fitters reach for them when they need to cut boxing, free pipe clips, trim floorboards or deal with old screws tucked behind units and baths.
- Kitchen fitters and flooring lads swear by a dewalt multi tool blade set because the job changes every room, from undercutting architraves to trimming laminate, adhesive and mixed fixings.
- Maintenance teams and refurb crews rely on these sets for all the awkward little cuts that slow a job down, and many back them up with DeWalt loose multi tool blades for the patterns they burn through most.
Accessories That Keep Your Multi Tool Working
A few sensible extras save wasted blades, wasted time and a lot of site faff.
1. Loose Replacement Blades
Once you work out which blade pattern you kill fastest, stock loose replacements. It stops you tearing open a full set just because one wood cutter or metal blade has had a hard day on hidden fixings.
2. Scraper Blades
Get a scraper blade for lifting old adhesive, silicone, vinyl residue and paint build-up. You will be glad of it when you are cleaning surfaces without gouging them with a chisel.
3. Storage Cases or Organisers
A proper case stops good blades rattling loose in the van, chipping teeth and disappearing under a pile of fixings. It also means you can see your wood, metal and specialist blades at a glance.
4. Spare Batteries for the Tool
A sharp blade is pointless if the multi tool dies halfway through a cut under a worktop or in a ceiling void. Keep a charged spare ready, especially if you are doing long runs of trimming or metal cutting.
Choose the Right DeWalt Multi Tool Blades for the Job
Match the blade type to the material before you start and the job goes far smoother.
| Your Job | Blade Type | Key Features |
|---|---|---|
| Trimming skirting, architrave and door linings | Wood cutting blade | Fast timber cutting, clean plunge entry, good control for flush work |
| Cutting nails, screws and thin brackets in refurbs | Metal cutting blade | Tougher tooth pattern, built for fixings and thin metal, less chance of immediate tooth loss |
| Moving between timber, plastic and hidden fixings | Mixed blade set | Covers changing site conditions, fewer hold-ups, sensible choice for general snagging and maintenance |
| Opening plasterboard and making small access cuts | Fine control plunge blade | Neater starts, easier steering in tight areas, less mess than using a larger saw |
| Removing sealant, adhesive or old floor residue | Scraper accessory blade | Gets under bonded material, saves damaging finished surfaces, quicker than hand scraping |
Common Buying and Usage Mistakes
- Using a wood blade on hidden screws or nails is the classic mistake. It will cut for a moment, then the teeth are gone and the blade is fit for the bin, so switch to a metal or mixed material blade as soon as fixings are likely.
- Buying the cheapest small set for full time site use usually backfires. If you are on refurbs or fit-out work all week, go bigger from the start or you will run out of the useful patterns first.
- Forcing a blunt blade through the cut wastes battery, overheats the blade and leaves a rough finish. The fix is simple: replace it early and let the tool do the work.
- Assuming every blade in the van fits every tool catches people out. Check the fitment against your DeWalt machine before the job, especially if you are mixing older accessories and newer tools.
- Treating multi tool blades like pry bars bends them out of shape fast. Cut with them, scrape with scraper blades, and use the proper hand tool when something needs levering free.
Wood Blades vs Metal Blades vs Mixed Sets
Wood Blades
Best for trimming timber, sheet material and joinery cuts where speed matters. They cut fast, but they are the wrong pick if you are likely to hit screws, nails or brackets hidden in the work.
Metal Blades
Built for nails, screws, thin steel, pipe clips and other hard inclusions that destroy standard timber blades. They are usually slower in clean wood, but much better value when the cut is full of surprises.
Mixed Blade Sets
The sensible all-round choice for refurbs, maintenance and snagging where no two cuts are the same. You get coverage for timber, metal and general site tasks without having to guess wrong before you start.
Sets vs Loose Blades
Sets are best when you need options on the day or are stocking up from scratch. Loose blades make more sense once you know exactly which patterns you wear out most on your own jobs.
Maintenance and Care
Clean Off Dust and Resin
After timber cuts, wipe off resin, dust and adhesive build-up before it bakes on. A dirty blade runs hotter, cuts slower and feels blunt sooner than it should.
Store Blades Properly
Keep blades in a case or organiser rather than loose in the bottom of the bag. That stops teeth getting knocked about and makes it easier to grab the right one without rummaging.
Change Blades Before They Cook
If the blade is smoking, burning the cut or bouncing across the material, it is past its best. Swap it out early instead of flogging it to death and wasting time on rough cuts.
Check the Mounting Face
Before fitting a fresh blade, clear dust and debris from the mounting point on the tool. A bad seat can cause wobble, poor cutting and extra wear on both the blade and machine.
Replace Bent or Chipped Blades
Once a blade is bent, missing teeth or badly worn, it will not suddenly improve. Bin it and fit a new one, especially on finish work where a wandering cut causes more grief than the blade costs.
Why Shop for DeWalt Multi Tool Blades at ITS?
Whether you need a compact dewalt multi tool blade set for snagging or a fuller range of DeWalt oscillating blades for regular site work, we stock the lot. You can also shop DeWalt multi tool blades and accessories and the wider DeWalt power tool accessories range in one place. It is all held in our own warehouse, in stock, and ready for next day delivery.
DeWalt Multi Tool Blade Set FAQs
What blades fit a DeWalt oscillating multi tool?
DeWalt oscillating multi tool blades made for the DeWalt fitting system are the safe bet, and most current blades are designed to work across common oscillating tools too. The main thing is checking the blade mount matches your machine before you order, especially if your tool is older or you are mixing brands already in the van.
Are DeWalt multi tool blades universal fit?
Many are made to suit universal fit systems, but do not assume every blade fits every tool without checking. In real site use, most problems come from older machines or odd fittings, so it is worth confirming the blade connection against your exact multi tool first.
What's the difference between wood and metal cutting blades?
Wood blades are shaped and toothed to cut timber quickly and cleanly. Metal blades are tougher and made to cope with screws, nails, brackets and thin metal where a wood blade would lose its teeth fast. If the cut is mixed or unknown, start with the tougher option.
Do blade sets make more sense than buying loose blades?
Yes, if you are starting from scratch or doing mixed site work. A set gives you proper cover for timber, metal and general trimming. Once you know which blade you go through most, then it makes sense to top up with loose replacements rather than keep buying full packs.
Will these blades cope with hidden fixings in old refurb work?
Yes, if you fit the right blade for the job. Metal cutting blades are the ones for hidden screws, nails and brackets. A standard wood blade might survive one or two surprises, but if the area is old or patched before, assume metal is in there and cut accordingly.
How do I know when a multi tool blade is finished?
You will feel it before anything else. The cut slows down, the blade starts burning the material, it vibrates more and you end up forcing the tool. That is the point to change it. Keep pushing and you just waste time, flatten batteries and spoil the finish.
