Makita Disc Cutters
Makita disc cutters are for quick, straight cuts through concrete, block, paving and steel when you cannot mess about with slow blades or bodges.
On refurbs and civils, you need a cutter that starts every time, holds a line, and does not bog down in hard material. Makita disc cutter options cover cordless and electric set-ups for cutting slab, kerbs, rebar and steelwork cleanly. Choose the power platform you already run, match the disc to the material, and get your cutting kit sorted properly.
What Are Makita Disc Cutters Used For?
- Cutting paving slabs, kerbs, and blockwork on hard landscaping jobs when you need a clean edge that does not shatter the face.
- Chasing and trimming concrete and stone on refurbs, including opening up for drains, ducts, and thresholds without over-breaking the area.
- Cutting steel sections, rebar, and box for fabrication and site welding work where a fast cut saves time over reciprocating saws.
- Snagging and alteration work on live sites where a Makita cordless disc cutter keeps you moving without leads, generators, or petrol faff.
- End-of-job tidy cuts on oversize materials, like trimming lintels, edging pavers, and shortening steel, so the finish looks like it was planned.
Choosing the Right Makita Disc Cutter
Sorting the right Makita cutter is simple: match the power platform and disc size to what you are cutting most days, not the one-off job.
1. Cordless vs Electric vs Petrol
If you are working inside, in occupied areas, or hopping between small cuts, a Makita cordless disc cutter is the sensible choice. If you are on a fixed cutting station with constant power, a Makita electric disc cutter keeps going without battery swaps. If you are doing long runs in heavy concrete away from power, a petrol cutter still has its place, but it comes with noise, fumes, and more maintenance.
2. Battery platform: 18V, 36V, 40V
If you already run LXT, a Makita disc cutter 18V or twin-battery Makita 36V disc cutter keeps your kit simple and your spares useful. If you are buying for daily cutting and want the newest platform, a Makita 40V disc cutter is the one to look at, because it is built around higher output packs and heavier workloads.
3. Disc diameter and cut depth
Bigger discs give you proper depth for kerbs and thicker concrete, but they are heavier and more tiring overhead. If most of your work is slabs, block and steel trimming, do not buy the biggest unit going just because it exists.
4. Dust control and wet cutting
If you are cutting indoors or in dry conditions, prioritise models that work well with extraction and proper guards, because sweeping slurry or silica dust for an hour is not a plan. If you can wet cut outside, it keeps the disc cooler and the air cleaner, but you still need to manage run-off and mess.
Makita Disc Cutter FAQs
Makita disc cutter or Makita cutter, is there any difference?
On site, it is the same thing. Most lads say Makita cutter, but you are talking about a disc cut-off saw for concrete, stone, or metal depending on the disc you fit.
Is a Makita cordless disc cutter actually strong enough for concrete cuts?
Yes for the majority of day-to-day cuts like slabs, blocks, edging and openings, as long as you run the right diamond disc and decent batteries. For constant deep cutting in heavy concrete all day, you will work faster with a bigger set-up, but cordless is more than capable for real site work.
Should I buy a Makita disc cutter 18V, Makita 36V disc cutter, or Makita 40V disc cutter?
If you already own LXT, staying on Makita disc cutter 18V or Makita disc cutter 36V keeps your batteries interchangeable across the van. If you are buying mainly for cutting work and want the newer high-output platform, Makita 40V disc cutter options are the better long-term shout, but budget for the batteries and charger.
What is the most powerful disc cutter?
It depends what you mean by powerful. The most powerful cutter for long, heavy cuts is usually a larger disc, higher output machine designed for continuous cutting, often petrol or high-output cordless. For a straight answer on what to look for, use this guide: What is the most powerful disc cutter?.
Can I use a Makita battery cut off saw for metal and masonry, or do I need two cutters?
You can use one Makita battery cutter for both, but you must swap to the correct disc and check the guard and rated size. Do not try and "make do" with a masonry disc on steel or vice versa, because it cuts badly and it is how wheels get wrecked.
What discs fit a Makita grinder, and are they the same as a Makita disk cutter disc?
No, not always. Grinders and disc cutters can use different disc diameters, bore sizes, and rated speeds, so you cannot assume they swap over safely. If you are checking grinder disc fitment, this is the right place to start: What discs fit a Makita grinder?.
Who Are Makita Disc Cutters For on Site?
- Groundworkers and landscapers cutting kerbs, slabs, and pavers all day, where a straight cut and decent depth saves rework.
- Brickies and general builders doing openings and alterations, using a Makita cutter to control the cut before the breaker comes out.
- Steel fixers and fabricators cutting rebar and steelwork on install days, especially when access is tight and you need a quick set-up.
- Maintenance and fit-out teams who want a Makita battery cut off saw for fast, mobile cuts without dragging power across occupied buildings.
The Basics: Understanding Makita Disc Cutters
A Makita disc cutter is only as good as the disc you fit and the way you run it. Get those two right and it cuts straight, fast, and without chewing through consumables.
1. Abrasive vs Diamond discs
Abrasive wheels are common for metal and will wear down as you cut, so keep spares on the van. Diamond discs are for masonry like concrete, block, and stone, and they want the right speed and feed so you are not glazing the segments or cooking the blade.
2. Battery cutters and power delivery
A Makita battery disc cutter gives you instant start and easy moves between cuts, but you need the right batteries for the workload. For constant cutting, plan spare packs and a charger on site, because nothing wastes time like a dead cutter mid-opening.
3. Let the disc do the work
If you are leaning on it to make it cut, you are usually overheating the disc and wandering off-line. Score your line, keep the guard set properly, and work in controlled passes for cleaner edges and longer disc life.
Disc Cutter Accessories That Stop Jobs Stalling
The cutter is only half the story; the right consumables and support kit are what keep you cutting safely and on schedule.
1. Diamond discs for concrete and masonry
Buy the right diamond disc for what you are cutting, because the wrong one just polishes the surface, overheats, and drags the job out. Keep a spare on site so you are not trying to finish a cut with a tired blade.
2. Abrasive cut-off wheels for metal
If you are cutting steel, have a stack of wheels ready, because they wear by design and you will burn time swapping between "one last cut" wheels that are already done.
3. Spare batteries and a fast charger
For any Makita cordless disc cutter, spare packs are not optional if you are cutting continuously. Set a charger up near the cutting area so you are not walking back to the van every time.
4. Dust extraction or water feed set-up
If you are cutting indoors or near other trades, sort dust control properly from the start, because silica dust gets everywhere and it is the quickest way to get shut down on site.
Why Shop for Makita Disc Cutters at ITS?
Whether you need a Makita disc cutter for masonry, a Makita battery disc cutter for mobile work, or the right discs and spares to keep it running, we stock the full range in one place. It is all held in our own warehouse, in stock and ready for next day delivery, so you can order today and be cutting on site tomorrow.
